FlangesApplication / Quality AttributeISO 9001 Certified Forged Flanges & Bulk Procurement

ISO 9001 Certified Forged Flanges & Bulk Procurement

Remax Forge & Fittings is ISO 9001:2015 certified for its flange manufacturing in Mumbai. This page explains what that certification covers, what it does not replace, and how to check any supplier's ISO 9001 certificate before you place an order.

EN 10204 3.1 MTC & third-party inspection allowed
Bulk Procurement Priority Desk

Direct Factory Procurement for ISO 9001 Forged Flanges

Source certified commodity and custom forged flanges in volume. Direct factory pricing from our Mumbai plant, line-by-line written RFQ replies, and door-to-door dispatch with complete 3.1 chemical & mechanical traceability.

Technical Overview & Sourcing Context

Remax Forge & Fittings is an ISO 9001:2015 certified manufacturer of forged flanges based in Mumbai, India. We deliver custom-engineered, fully-traceable forged piping components designed to meet strict industrial specifications for iso 9001 certified forged flange procurement across global infrastructure, chemical processing, oil & gas, and power generation projects.

Full Traceability

Every flange stamped with heat number, pressure rating, grade & size.

Zero-Defect Quality

Spectro PMI analysis, ultrasonic testing, hydrostatic testing & MTC 3.1/3.2.

Written Quotation

Price, production time and freight terms confirmed in writing for your exact list.

What ISO 9001:2015 certification covers

ISO 9001 is the international standard for quality management systems. A certification body audits whether the company runs its work through documented, controlled processes: how orders are reviewed, how production and inspection are planned, how measuring equipment is calibrated, how nonconforming parts are identified and held, and how problems are corrected so they do not recur.

After the initial certification audit, the certification body carries out surveillance audits during the certificate cycle, normally annually, and a recertification audit every three years.

What ISO 9001 does not replace

  • Product standards: flanges are still made and accepted to ASME B16.5, B16.47, EN 1092-1 and the material specification, such as ASTM A182 or A105.
  • Mill test certificates: each lot still needs its EN 10204 3.1 or 3.2 certificate showing chemistry, mechanical results and heat treatment.
  • Project inspection: an ISO 9001 certificate does not replace third-party inspection or hold points in your inspection and test plan.
  • Owner or licensor approvals, which are separate processes set by each company.

How to check a supplier's ISO 9001 certificate

  • Ask for a copy and read the scope: it should cover the manufacture of the products you are buying, not only trading.
  • Check the certification body and whether it is accredited by a national accreditation body that is a member of the International Accreditation Forum (IAF).
  • Check the issue and expiry dates.
  • Where the certificate is listed, confirm it on the certification body's register or the IAF CertSearch database.

What it means for a Remax Forge order

Flanges are made at our ISO 9001:2015 certified works in Mumbai and supplied with EN 10204 3.1 mill test certificates, with 3.2 certificates available when an independent inspector is named. Inspection includes PMI, ultrasonic testing and hydrostatic testing as ordered. Our certificates are shown on the certification page.

Material CategoryGrades / Specifications
Stainless Steel ISO 9001 Certified Forged Flanges & Bulk ProcurementASTM/ASME A/SA182: F304, F304L, F316, F316L, F316H, F316Ti, F321, F347; Cast: CF3, CF3M, CF8, CF8M; DIN: 1.4301, 1.4306, 1.4401, 1.4404, 1.4408, 1.4409
Duplex Steel ISO 9001 Certified Forged Flanges & Bulk ProcurementUNS S31803/S32205 — ASTM A182 Gr F51, F52, F53, F54, F55, F57, F59, F60, F61
Super Duplex ISO 9001 Certified Forged Flanges & Bulk ProcurementUNS S32750/S32760 — ASTM A182 Gr F53, F55; Zeron 100
Carbon Steel ISO 9001 Certified Forged Flanges & Bulk ProcurementASTM/ASME A/SA105, A105N, A216-WCB; A350 LF2 (low temp); A694 F52/F56/F60/F65/F70/F80 (high yield); DIN 1.0460, 1.0402, 1.0619
Alloy Steel ISO 9001 Certified Forged Flanges & Bulk ProcurementASTM A182/ASME SA182: F5, F9, F11, F12, F22, F91 (all P-grades for high temp service)
Nickel Alloy ISO 9001 Certified Forged Flanges & Bulk ProcurementInconel 600, 601, 625, 718, 690, X750 (ASTM B564/ASME SB564); Incoloy 800, 800H, 800HT, 825, 925
Hastelloy ISO 9001 Certified Forged Flanges & Bulk ProcurementC276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X (ASTM B564)
Monel ISO 9001 Certified Forged Flanges & Bulk ProcurementMonel 400 (UNS N04400), Monel K500 (UNS N05500) — ASTM B564
Pure Nickel ISO 9001 Certified Forged Flanges & Bulk ProcurementNickel 200, 201, 205, 205LC — ASTM B564/ASME SB564
Copper Nickel ISO 9001 Certified Forged Flanges & Bulk ProcurementCuNi 90/10 (C70600), CuNi 70/30 (C71500), UNS C71640 — ASTM/ASME SB 61/62/151/152
Titanium ISO 9001 Certified Forged Flanges & Bulk ProcurementGr.1, Gr.2, Gr.4, Gr.5, Gr.7 — ASTM B381/ASME SB381; R50250/R50400/R50550/R50700/R52400/R53400/R56400
Aluminium ISO 9001 Certified Forged Flanges & Bulk Procurement5052, 6061, 6063, 2017, 7075
Brass ISO 9001 Certified Forged Flanges & Bulk Procurement3602, 2604, H59, H62
Special Alloy ISO 9001 Certified Forged Flanges & Bulk ProcurementAlloy 20 (ASTM B462 SB462 — Carpenter 20Cb-3); SMO 254/6Mo (UNS S31254, DIN 1.4547); Al6XN; AISI 4130; AISI 4140; Nimonic 75/80A/90; Gunmetal; Cast Iron
Standard / SpecScope / Application Details
🇺🇸ANSI/ASME B16.5NPS ½" to 24" — the primary standard for most flanges
🇺🇸ASME B16.47 Series A (MSS SP-44)NPS 26" to 60" — large diameter
🇺🇸ASME B16.47 Series B (API 605)NPS 26" to 60" — large diameter (lighter)
🇺🇸ASME B16.36Orifice flanges
🇺🇸ASME B16.48Line blinds & spectacle blinds
🇪🇺DIN 2501 / EN 1092-1European metric standard — PN ratings
🇯🇵JIS B2220Japanese Industrial Standard
🇬🇧BS 4504 / BS 10 Table D/E/F/HBritish Standard
🇺🇸MSS SP-44Large diameter steel pipeline flanges
🇺🇸API 6AWellhead and Christmas tree equipment
🇺🇸API 605Large diameter carbon steel flanges
🇺🇸AWWA C207Water works flanges
🇷🇺GOST 12820 / 12821Russian/CIS standard
🇦🇺AS 2129 / AS 4087 / AS/NZS 4331.1Australian standard
🇰🇷KS B1503Korean standard
🌐ISO 7005-1 / ISO 9624International standard
🇺🇸SAE J518Hydraulic flanged tube fittings
🇨🇳GB StandardChinese national standard
Raised Gasket Area

Raised Face (RF)

Most common. A raised circular ring that concentrates pressure on a smaller area to compress the gasket. Height: 1/16" for Class 150/300; 1/4" for Class 400 and above.

100% Flat Mating Surface

Flat Face (FF)

No raised portion; entire flange face is in the same plane. Used when mating against cast iron or non-metallic flanges to avoid cracking on bolt tightening.

Deep Metallic Ring Groove

Ring Type Joint (RTJ)

Oval or octagonal groove machined into the face; a metal ring gasket seats in the groove. Used in high-pressure, high-temperature critical service (refineries, oil fields).

Interlocking Alignment

Tongue & Groove (T&G)

One flange has a raised ring (tongue); the other a matching groove. Provides excellent alignment and a confined gasket. Used in pumps and valve bonnets.

Recessed Female Mating

Male & Female (M&F)

Similar to T&G but the female face is flat and the male face raised. Used in heat exchangers, pressure vessels, and high-integrity process joints.

Heavy-Duty Contact

Large Male & Female

Same operating principle as the standard Male & Female flange, scaled up with larger step contact surfaces for specialized heavy industrial equipment.

Hydrostatic / Hydro Pressure Test

Each flange pressure tested at 1.5x working pressure per ASME code requirements.

Ultrasonic Testing (UT)

Non-destructive testing to detect internal sub-surface cracks, inclusions and forging defects.

Radiographic Testing (RT / X-Ray)

100% radiography available; mandatory for critical Class 900+ high pressure services.

Positive Material Identification (PMI)

Spectrometer validation to verify alloy chemistry precisely matches the Mill Test Certificate.

Dye Penetrant Test (DPT / LPT)

Detects micro surface cracking and porosity on critical machined seating surfaces.

Magnetic Particle Inspection (MPI)

For ferromagnetic alloys; flags surface and near-surface structural discontinuities.

Hardness Test (Brinell/Rockwell)

Verifies correct heat treatment structure and ensures mechanical properties are hit.

Direct-Reading Spectrograph

In-house lab chemical checks of billets before forging process begins.

Impact / Charpy Test

Crucial for low-temperature applications to verify ductility (e.g. A350 LF2, LTCS).

NACE Compliance Testing

Verifies sour-gas / H2S environment service capability (NACE MR0175 / MR0103).

Mill Test Certificate (MTC)

Provided as per EN 10204 3.1 detailing chemical & mechanical analysis.

EN 10204 3.2 Certificate

Independent third-party inspection validation (available upon request).

NACE MR0175 / MR0103 Compliance

Certified suitability for sour gas/H2S environments.

Raw Materials Certificate

Provides 100% trace origin tracking from steel billet to finished flange.

Dimensional Inspection Report

All critical tolerances checked and certified against CAD designs.

Heat Treatment Certificate

HTR and PWHT thermal chart records included where requested.

Hydrostatic Test Certificate

Pressure log documentation verifying weld integrity.

Third Party Inspection (TPI)

Bureau Veritas, SGS, Lloyds, DNV, TUV inspection options.

Packing List & Weight Certificate

Proper documentation for simple custom clearance and cargo log.

Country of Origin Certificate

Enables import tariff relief and compliance logging.

🔒 Certified Compliance Guaranteed

Frequently Asked Questions

Q: Is ISO 9001 a product certification?

No. It certifies the quality management system. Product conformity is shown by the mill test certificate and inspection reports for each lot.

Q: Do I still need a 3.1 certificate from an ISO 9001 supplier?

Yes. ISO 9001 does not replace the EN 10204 certificate for each lot. Every Remax Forge order ships with a 3.1 certificate.

Q: How often is an ISO 9001 certificate audited?

Surveillance audits are held during the three-year certificate cycle, usually once a year, with a full recertification audit every three years.

Q: Can I see your ISO 9001 certificate?

Yes. It is shown on the certification page of this website.

Why Choose Remax Forge?

Remax Forge & Fittings stands out as a leading flange manufacturer due to our complete in-house forging, heat treatment, and precision CNC machining capabilities based in Mumbai. We provide certified compliance, factory-direct wholesale pricing, and custom forging schedules tailored to your engineering blueprints. With over 20 years of manufacturing experience, zero-defect quality management, and short lead times, we are a trusted supply partner for critical industrial piping projects.

ISO 9001:2015 Certified

Fully audited quality management workflows.

In-House Forging

Forging, heat-treat, machining in Mumbai.

Testing Laboratory

PMI, Spectro, UT, Hydro labs on-site.

Mill Certificates

EN 10204 3.1 standard; 3.2 available.

20+ Years Experience

Serving critical gas/oil clients globally.

45+ Export Countries

Proven global logistics and documentation.

Custom Forging

Special shapes, alloys and schedules.

Factory-Direct Price

Competitive pricing with no agent markup.

Technical Support

Engineers ready to assist spec selection.

Short Lead Times

Fast turnaround of custom and stock orders.

Global Export Network

AmericasUSA (Texas, Houston, Louisiana), Canada, Brazil, Colombia, Mexico
Middle EastUAE (Dubai, Abu Dhabi), Saudi Arabia, Qatar, Kuwait, Oman, Bahrain, Iraq, Iran
AfricaNigeria (Lagos, Port Harcourt), Ghana, South Africa, Egypt, Kenya, Libya
EuropeGermany, Italy, Netherlands, Norway (Stavanger), Spain, France, UK
Asia-PacificSingapore, Malaysia, Indonesia, Vietnam, Australia, South Korea, Japan
Central AsiaKazakhstan, Azerbaijan, Turkmenistan
🌍 Trusted logistics across 6 continents
Procurement Process

How to Order

Ordering high-quality forged flanges from Remax is straightforward. To ensure our engineering team provides you with a precise and competitive quote, please specify the exact flange type, nominal pipe size (NPS), pressure class rating, material grade, and facing configuration. Let us know your total quantity requirements and if you require any specialized testing or custom coatings. Contact us via email or phone.

1Flange Type (e.g. Weld Neck, Slip On, Blind, etc.)
2Size — NPS (Nominal Pipe Size) in inches (e.g. 2", 4", 10")
3Pressure Class (e.g. 150#, 300#, 600#, 900#, 1500#, 2500#)
4Material Grade (e.g. ASTM A105, A182 F316L, A182 F51)
5Facing Type (RF / FF / RTJ / T&G / M&F)
6Quantity required
7Standard / Specification (ASME B16.5, DIN, JIS, etc.)
8Any special requirements (NACE, low-temp, PMI, 3rd party inspection, surface coating)

Direct Inquiries

Estimated Lead Times

Standard sizes & specs:7–14 days
Special alloys / customs:3–6 weeks

Ready to Quote Your Custom Flange Project?

Send us your drawing, specifications, or inquiry details. Our technical engineering team will review your specs and provide a firm written quotation with price, production time and EN 10204 3.1 certification.