Class 150 to 600 flanges in A105 and SS 304/316 for the plants going up at Vikram Udyogpuri near Ujjain, made at our ISO 9001:2015 works in Mumbai and sent by road with EN 10204 3.1 certificates. The lead time is stated on your written quote.
Sanitary grade pipelines and food manufacturing lines: SS 304/316 Flanges, Buttweld Elbows.
Lead time for Ujjain is stated on your written quote.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades supplied with an EN 10204 3.1 MTC.

Most new flange demand around Ujjain comes from Vikram Udyogpuri, the Delhi–Mumbai Industrial Corridor township east of the city. Remax Forge supplies Class 150 (150#) flanges, stainless 304 slip-on flanges and weld neck (WN) flanges from our Mumbai works with an EN 10204 3.1 MTC. See also Indore and Bhopal.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Ujjain, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Vikram Udyogpuri is an integrated industrial township in Ujjain district near Narwar, about 14 km from Ujjain on the Dewas–Ujjain road. It covers about 1,100 acres, was developed by an SPV of NICDC and the Madhya Pradesh government, and was dedicated to the nation in October 2023. A large dairy cooperative is one of the anchor investors, and MPIDC has acquired more than 400 hectares for a second phase.
New plants order complete flange packages at construction: A105 weld neck and slip-on flanges in Class 150 for utilities, steam and fire water, SS 304/316 for dairy and food process lines, and blind flanges for every future connection. Fire-water ring mains use Class 150 or PN16 with the drilling to match the hydrant valves.
For a new plant, send the piping BOQ or line list rather than a few sizes. The quote prices every line item and states the lead time, which helps the EPC contractor plan erection.
| Service | Flanges & fittings usually specified |
|---|---|
| Utilities and fire water | Slip-on or weld neck, Class 150 or PN16, A105 |
| Dairy and food process | SS 304/316 slip-on or weld neck, Class 150 or PN10/PN16 |
| Boiler and steam | Weld neck RF, Class 300/600, A105 |
| Future connections | Blind flanges in the line class |
What we quote most often for Vikram Udyogpuri, Narwar, Vikram Udyogpuri phase II. Sizes, classes and grades below are those listed on our flange product pages; anything else is quoted against your specification.
| Types we quote | Class 150 (150#) flanges, stainless 304 slip-on flanges, weld neck (WN) flanges, plus blinds and spectacle blinds in the same class |
|---|---|
| Dimension standards | ASME B16.5 (NPS ½"–24"), ASME B16.47 Series A/B (NPS 26"–60"), EN 1092-1 (PN6–PN400) |
| Rating range | Class 150, 300, 400, 600, 900, 1500, 2500; PN6 to PN400 |
| Grades for Ujjain service | A105 for utilities and steam; SS 304/316 for food and dairy; galvanised for fire water on request |
| Face options | RF, FF, RTJ, tongue & groove, male & female |
| Certificates | EN 10204 3.1 MTC with heat number on each piece; 3.2 on request |
| Dispatch | By road from Mumbai to Ujjain; lead time on the written quote |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in SS 304/316, Class 150–2500, for food & agro piping in Ujjain.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for water & utility lines in Ujjain.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at water & utility units in Ujjain.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Sanitary grade pipelines and food manufacturing lines
SS 304/316 Flanges, Buttweld Elbows

Municipal water distribution, water treatment & supply mains
Mild Steel Flanges, Concentric Reducers, Weld Bends
Route: Road freight from Mumbai to Ujjain. The lead time and delivery schedule depend on the items and testing ordered and are stated on the written quote. Packing: crates or pallets with rust-preventive coating. Docs: invoice, packing list, EN 10204 3.1 MTC, test reports as ordered.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































Yes. Send the piping BOQ or line list and we will price each item, with the lead time stated on the quote. Flanges are to ASME B16.5 or EN 1092-1 with an EN 10204 3.1 MTC.
Class 150 or PN16 slip-on or weld neck flanges in A105, drilled to match the hydrant and valve flanges. Check whether your valves are ASME or EN drilled.
Yes. SS 304 and SS 316 weld neck, slip-on and blind flanges with the bore matched to the schedule and an MTC per heat.
Yes. Mark each item's delivery point, whether Ujjain city or Vikram Udyogpuri, and the quote lists them separately.
Orders go by road from our Mumbai works. The lead time depends on the types, sizes and tests ordered, so it is stated item by item on the written quote for Ujjain rather than as a fixed number of days.
No. Manufacturing and testing are at our ISO 9001:2015 works in Mumbai, and Ujjain orders are sent from there by road. We have no office or warehouse in Ujjain.
EN 10204 3.1 mill test certificates, with dimensional reports and hydro, UT or PMI reports as ordered. A 3.2 certificate can be arranged when the specification calls for it.