Weld neck, socket weld and blind flanges for the utilities, hydraulics and test rigs of Jabalpur's defence factories and engineering units, made at our ISO 9001:2015 works in Mumbai and sent by road with EN 10204 3.1 certificates. The lead time is stated on your written quote.
High-precision components for aviation & defence systems: Nickel Alloy Flanges, High-Pressure SW Fittings.
Lead time for Jabalpur is stated on your written quote.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades supplied with an EN 10204 3.1 MTC.

Jabalpur has four defence production units, and their steam, compressed-air, hydraulic and test lines all use flanges. Remax Forge supplies weld neck (WN) flanges, socket weld (SW) flanges and blind (BL) flanges from our Mumbai works with an EN 10204 3.1 MTC. See also Bhopal and Indore.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Jabalpur, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Jabalpur has four ordnance units: Ordnance Factory Khamaria, the Gun Carriage Factory, Vehicle Factory Jabalpur and the Grey Iron Foundry. The Gun Carriage Factory dates from 1904. Vehicle Factory Jabalpur, set up in 1969 to build vehicles for the armed forces, is now part of Armoured Vehicles Nigam Limited, and Khamaria is a major ammunition plant.
Plants of this kind run boiler houses, process steam, compressed air, hydraulic presses and pressure test rigs. Steam and air headers take A105 weld neck or slip-on flanges in Class 150/300. Hydraulic and test-rig lines are small-bore and high-pressure, which means socket weld or weld neck flanges in Class 600 to 2500, with blind flanges to close test points.
Defence-sector buyers and their vendors usually ask for full traceability. Every flange we supply carries a heat number tied to its EN 10204 3.1 MTC, and a 3.2 certificate with third-party inspection can be quoted when the purchase order requires it.
| Service | Flanges & fittings usually specified |
|---|---|
| Boiler house and process steam | Weld neck or slip-on RF, Class 150/300, A105 |
| Hydraulic presses | Socket weld or weld neck, Class 1500/2500, A105 or alloy |
| Pressure test rigs | Weld neck and blind flanges, Class 600–2500 |
| Compressed air headers | Slip-on and threaded flanges, Class 150, A105 |
What we quote most often for Ordnance Factory Khamaria, Gun Carriage Factory and Vehicle Factory Jabalpur, Grey Iron Foundry. Sizes, classes and grades below are those listed on our flange product pages; anything else is quoted against your specification.
| Types we quote | weld neck (WN) flanges, socket weld (SW) flanges, blind (BL) flanges, plus blinds and spectacle blinds in the same class |
|---|---|
| Dimension standards | ASME B16.5 (NPS ½"–24"), ASME B16.47 Series A/B (NPS 26"–60"), EN 1092-1 (PN6–PN400) |
| Rating range | Class 150, 300, 400, 600, 900, 1500, 2500; PN6 to PN400 |
| Grades for Jabalpur service | A105 for steam and air; alloy (F11/F22) for high-temperature lines; SS 304/316 where specified |
| Face options | RF, FF, RTJ, tongue & groove, male & female |
| Certificates | EN 10204 3.1 MTC with heat number on each piece; 3.2 on request |
| Dispatch | By road from Mumbai to Jabalpur; lead time on the written quote |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in SS 316L, Inconel 625 & Monel on order, Class 150–2500, for aerospace & defence piping in Jabalpur.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for cement & mining lines in Jabalpur.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at engineering units in Jabalpur.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

High-precision components for aviation & defence systems
Nickel Alloy Flanges, High-Pressure SW Fittings

Abrasive material handling & excavation slurry loops
Hardox Wear Plates, High-Thickness Flanges

Heavy machining, hydraulic loops, and tooling assemblies
Forged Hub Flanges, Threaded Couplings
Route: Road freight from Mumbai to Jabalpur. The lead time and delivery schedule depend on the items and testing ordered and are stated on the written quote. Packing: crates or pallets with rust-preventive coating. Docs: invoice, packing list, EN 10204 3.1 MTC, test reports as ordered.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































Yes. Socket weld and weld neck flanges to ASME B16.5 Class 1500 and 2500 in A105 or alloy steel, with the bore matched to the pipe schedule and an EN 10204 3.1 MTC.
Yes, when the purchase order calls for it. A 3.2 certificate is countersigned by an independent inspector or the buyer's representative after witnessing, which adds cost and time, so put it on the RFQ.
No. We supply to the factories' contractors and to engineering units in Jabalpur against their own specifications. Send the specification with the RFQ and we will quote against it.
For each item: type, size, class or PN, facing, bore or schedule, grade, standard, quantity and any test requirements. The checklist below lists everything we need.
Orders go by road from our Mumbai works. The lead time depends on the types, sizes and tests ordered, so it is stated item by item on the written quote for Jabalpur rather than as a fixed number of days.
No. Manufacturing and testing are at our ISO 9001:2015 works in Mumbai, and Jabalpur orders are sent from there by road. We have no office or warehouse in Jabalpur.
EN 10204 3.1 mill test certificates, with dimensional reports and hydro, UT or PMI reports as ordered. A 3.2 certificate can be arranged when the specification calls for it.