Flanges, butt-weld and forged fittings for Mumbai's refinery, fertilizer and port & marine units, made at our ISO 9001:2015 works in Mumbai, dispatched from stock in 24–48 h and delivered in about 1 day, with EN 10204 3.1 certificates.
Hydrocarbon processing, thermal cracking & high-temp lines: Alloy Steel Flanges, RTJ Joints, High-Pressure Fittings.
Ex-stock dispatch from Mumbai in 24–48 h, then road freight to Mumbai.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades held in stock.

Supplying Mumbai means understanding HQ city: HPCL & BPCL refineries, RCF Chembur, Mazagon Dock, BARC, JNPT belt. Remax Forge ships weld neck flanges, spectacle blind flanges and butt weld elbows from Mumbai into MIDC Andheri, Taloja & Rabale (TTC), port zone — A105, F11/F22, SS 316L, Duplex 2205, ASME B16.5/B16.11 dimensions, EN 10204 3.1 MTC on every lot.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Mumbai, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Mumbai's demand for flanges and fittings comes mainly from HQ city: HPCL & BPCL refineries, RCF Chembur, Mazagon Dock, BARC, JNPT belt. Refinery and terminal piping runs mostly on A105 and A350 LF2 weld neck flanges in Class 150–600, with RTJ faces from Class 900 up and F11/F22 alloy flanges on heater and hot-oil service. Ammonia-urea plants need low-temperature LF2 forgings, stainless and super duplex flanges and forged tees for high-pressure synthesis loops. Ports, shipyards and terminals order copper-nickel and duplex flanges, blind flanges and socket-weld fittings for seawater, ballast and fuel lines.
Orders for Mumbai leave our Mumbai stock within 24–48 hours and travel by road by local road dispatch, so material is usually on site in about 1 day. Custom forgings and non-stock sizes take 7–15 working days. To quote quickly we need the size (NPS or DN), pressure class, facing (RF, FF or RTJ), material grade and the schedule of the mating pipe.
Every lot ships with an EN 10204 3.1 mill test certificate, and heat numbers are marked on each piece so they can be traced back to it. Alloy and stainless items can be PMI-checked before dispatch, and inspection by your own or a third-party agency is welcome at our works. We use the same route to serve Nagpur, Nashik, Pune and Thane, so mixed orders for plants in the region can be planned together.
| Service | Flanges & fittings usually specified |
|---|---|
| Hydrocarbon process lines | A105 / A350 LF2 weld neck RF flanges, Class 150–600; RTJ for Class 900 and above |
| Ammonia service | A350 LF2 weld neck flanges and A420 WPL6 fittings |
| Seawater & ballast lines | Cu-Ni 90/10 or duplex F51 flanges and fittings |
| Heater & hot-oil piping | A182 F11 / F22 / F5 flanges with A234 WP11 / WP22 fittings |
| Urea & carbamate lines | SS 316L (urea grade where specified) or super duplex F53 |
| Fuel & cargo lines | A105 weld neck flanges, Class 150–300 |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in A105, F11/F22, SS 316L, Duplex 2205, Class 150–2500, for refinery piping in Mumbai.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for fertilizer lines in Mumbai.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at port & marine units in Mumbai.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Hydrocarbon processing, thermal cracking & high-temp lines
Alloy Steel Flanges, RTJ Joints, High-Pressure Fittings

Corrosive chemical transfer & high-pressure piping networks
Super Duplex Flanges, Custom Forged Tees

Saltwater piping, ballast systems & shipyard infrastructure
Copper Nickel (Cu-Ni) Flanges, Bronze Fittings
Route: local road dispatch. Ex-stock dispatch 24–48 h from Mumbai; road freight ≈ 1 day to Mumbai. Custom forgings: 7–15 working days. Packing: seaworthy crates/pallets with rust-preventive coating. Docs: invoice, packing list, 3.1 MTC, test reports.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































We deliver Weld Neck Flanges, Spectacle Blind Flanges, Butt Weld Elbows and Lap Joint Flanges to Mumbai in A105, F11/F22, SS 316L, Duplex 2205, dimensioned to ASME B16.5, B16.47 and B16.11. Demand here comes mainly from oil & gas (refining) and ports & marine — including units around MIDC Andheri — and every lot ships with EN 10204 3.1 certification.
Yes. For refinery and hydrocarbon service near HQ city: HPCL & BPCL refineries we supply weld neck and RTJ-faced flanges plus spectacle blinds in A105, F11/F22, SS 316L and Duplex 2205, compliant with NACE MR0175 where specified. Third-party (3.2) inspection can be arranged on request.
Honestly: ex-stock items dispatch from our Mumbai warehouse within 24–48 hours and reach Mumbai in roughly 1 days by road. Custom forgings add 7–15 working days of production. We confirm a dated schedule with every quotation rather than promising blanket next-day delivery.
We deliver door-to-site across Mumbai, including MIDC Andheri, Taloja, Rabale (TTC) and port zone, and to nearby Nagpur, Nashik, Pune and Thane. Goods leave our Mumbai stock within 24–48 hours and travel by road by local road dispatch, normally arriving in about 1 day.
No — and we say so plainly. Manufacturing, stock and testing are at our ISO 9001:2015 facility in Mumbai; Mumbai is served through scheduled road dispatches with full documentation. Buyers are welcome to audit the Mumbai works in person or by video inspection before ordering.
Every Mumbai dispatch includes EN 10204 3.1 mill test certificates, dimensional reports and hydro/NDT test reports as ordered, NACE MR0175 compliance and 3.2 third-party inspection on request. 100% PMI is standard on alloy and stainless lots.
We keep MOQs low for the Mumbai corridor — small lots are clubbed with our scheduled dispatches on this route, so a single-item trial order is workable. Project-quantity rates apply from roughly 100 pieces or 500 kg per grade.