Flanges, butt-weld and forged fittings for Nagpur's power & boiler, engineering and aerospace & defence units, made at our ISO 9001:2015 works in Mumbai, dispatched from stock in 24–48 h and delivered in about 2 days, with EN 10204 3.1 certificates.
Superheated steam lines, IBR boiler circuits & exhaust pipes: Alloy Steel P91/F22 Flanges, IBR Fittings.
Ex-stock dispatch from Mumbai in 24–48 h, then road freight to Nagpur.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades held in stock.

Around Butibori & Hingna MIDC, MIHAN SEZ, procurement runs on Power gear & transmission, MIHAN aerospace/logistics, Koradi-Khaperkheda thermal belt. We serve this demand from Mumbai with weld neck flanges, butt weld tees and concentric reducers in A105, F11/F22/F91 (IBR), built to ASME B16.5/B16.11 and documented with EN 10204 3.1 certificates.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Nagpur, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Nagpur's demand for flanges and fittings comes mainly from Power gear & transmission, MIHAN aerospace/logistics, Koradi-Khaperkheda thermal belt. Power stations and boiler houses buy A105 and alloy F11/F22/F91 weld neck flanges and fittings for steam, feedwater and blow-down lines, with IBR documents where the line falls under the Indian Boiler Regulations. Machine builders and component makers buy small-bore forged fittings, threaded flanges and socket-weld items for hydraulic, compressed-air and coolant circuits. Aerospace, defence and research establishments order nickel-alloy and stainless high-pressure fittings and flanges with full traceability and inspection records.
Orders for Nagpur leave our Mumbai stock within 24–48 hours and travel by road on NH48+NH53 via Pune–Amravati (~830 km), so material is usually on site in about 2 days. Custom forgings and non-stock sizes take 7–15 working days. To quote quickly we need the size (NPS or DN), pressure class, facing (RF, FF or RTJ), material grade and the schedule of the mating pipe.
Every lot ships with an EN 10204 3.1 mill test certificate, and heat numbers are marked on each piece so they can be traced back to it. Alloy and stainless items can be PMI-checked before dispatch, and inspection by your own or a third-party agency is welcome at our works. Steam-line items for boiler work can be supplied with IBR documents. We use the same route to serve Mumbai, Nashik, Pune and Thane, so mixed orders for plants in the region can be planned together.
| Service | Flanges & fittings usually specified |
|---|---|
| Main steam & feedwater | A182 F11 / F22 / F91 weld neck flanges, Class 600–2500, IBR where applicable |
| Hydraulic & compressed-air circuits | A105 / SS 316 forged fittings, 3000# and 6000#, socket-weld or threaded |
| High-pressure test & fluid lines | 6000# / 9000# forged fittings in SS 316L or nickel alloy |
| Auxiliary steam & drains | A105 flanges with 3000# / 6000# socket-weld fittings |
| Machine & test-rig piping | Threaded and slip-on flanges to ASME B16.5, Class 150–600 |
| Special-material flanges | Inconel 600 / 625 and Monel flanges with full traceability |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in A105, F11/F22/F91 (IBR), Class 150–2500, for power & boiler piping in Nagpur.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for engineering lines in Nagpur.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at aerospace & defence units in Nagpur.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Superheated steam lines, IBR boiler circuits & exhaust pipes
Alloy Steel P91/F22 Flanges, IBR Fittings

Heavy machining, hydraulic loops, and tooling assemblies
Forged Hub Flanges, Threaded Couplings

High-precision components for aviation & defence systems
Nickel Alloy Flanges, High-Pressure SW Fittings
Route: NH48+NH53 via Pune–Amravati (~830 km). Ex-stock dispatch 24–48 h from Mumbai; road freight ≈ 2 days to Nagpur. Custom forgings: 7–15 working days. Packing: seaworthy crates/pallets with rust-preventive coating. Docs: invoice, packing list, 3.1 MTC, test reports, IBR documentation where applicable.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































We deliver Weld Neck Flanges, Butt Weld Tees, Concentric Reducers and Boiler Quality Plates to Nagpur in A105, F11/F22/F91 (IBR), dimensioned to ASME B16.5, B16.47 and B16.11. Demand here comes mainly from power & boilers and engineering & auto — including units around Butibori & Hingna MIDC — and every lot ships with EN 10204 3.1 certification.
Yes. For steam service around Power gear & transmission we supply A105, F11, F22 and F91 flanges, butt-weld tees and reducers with IBR documentation documentation, plus 3.1 MTCs and hydro test reports, so boiler inspectorate approvals in Maharashtra proceed without paperwork gaps.
Honestly: ex-stock items dispatch from our Mumbai warehouse within 24–48 hours and reach Nagpur in roughly 2 days by road (NH48+NH53 via Pune–Amravati (~830 km)). Custom forgings add 7–15 working days of production. We confirm a dated schedule with every quotation rather than promising blanket next-day delivery.
We deliver door-to-site across Nagpur, including Butibori, Hingna MIDC and MIHAN SEZ, and to nearby Mumbai, Nashik, Pune and Thane. Goods leave our Mumbai stock within 24–48 hours and travel by road on NH48+NH53 via Pune–Amravati (~830 km), normally arriving in about 2 days.
No — and we say so plainly. Manufacturing, stock and testing are at our ISO 9001:2015 facility in Mumbai; Nagpur is served through scheduled road dispatches with full documentation. Buyers are welcome to audit the Mumbai works in person or by video inspection before ordering.
Every Nagpur dispatch includes EN 10204 3.1 mill test certificates, dimensional reports and hydro/NDT test reports as ordered, IBR documentation for steam-service items. 100% PMI is standard on alloy and stainless lots.
We keep MOQs low for the Nagpur corridor — small lots are clubbed with our scheduled dispatches on this route, so a single-item trial order is workable. Project-quantity rates apply from roughly 100 pieces or 500 kg per grade.