Socket weld, threaded, weld neck and high-pressure flanges for the auto and engineering plants of Chakan, Ranjangaon and Bhosari, made at our ISO 9001:2015 works in Mumbai and sent by road with EN 10204 3.1 certificates. The lead time is stated on your written quote.
Heavy machining, hydraulic loops, and tooling assemblies: Forged Hub Flanges, Threaded Couplings.
Lead time for Pune is stated on your written quote.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades supplied with an EN 10204 3.1 MTC.

Pune's flange buyers are the auto, engineering and process plants in its MIDC areas, a short road trip from our Mumbai works. Remax Forge supplies socket weld (SW) flanges, threaded (screwed) flanges and high-pressure (Class 1500/2500) flanges with an EN 10204 3.1 MTC. See also Mumbai and Nashik.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Pune, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Chakan MIDC, on NH-60 and NH-48, is Pune's main automotive and engineering hub, with vehicle assembly plants and many tier-1 suppliers. Ranjangaon MIDC, a five-star industrial area on the Pune–Ahmednagar highway about 50 km north-east of Pune, has automotive, electronics, consumer goods and chemical plants. Bhosari MIDC, east of Pimpri, is a dense estate of metalworking, plastics and general engineering units. In 2025, 49 MSMEs committed about Rs 2,321 crore of investment in the Chakan–Bhosari belt.
Auto plants use flanges on paint-shop, compressed-air, chilled-water and hydraulic systems. Compressed air and small-bore utilities take threaded and socket weld flanges in Class 150/300; hydraulic presses and test benches take socket weld or weld neck flanges in Class 1500/2500. Chemical units at Ranjangaon add SS 316L and alloy flanges on process lines.
Being close to Mumbai helps on urgent orders, but the lead time still depends on what is in stock and what has to be machined. Mark urgent lines on the RFQ, and the quote will give a lead time for each.
| Service | Flanges & fittings usually specified |
|---|---|
| Compressed air and utilities | Threaded and socket weld flanges, Class 150/300, A105 |
| Hydraulic presses and test benches | Socket weld or weld neck, Class 1500/2500, A105 |
| Paint shop and chilled water | Slip-on, Class 150 or PN10/PN16, A105 or SS 304 |
| Chemical process lines | Weld neck RF, Class 150/300, SS 316L or alloy |
What we quote most often for Chakan MIDC, Ranjangaon MIDC, Bhosari MIDC. Sizes, classes and grades below are those listed on our flange product pages; anything else is quoted against your specification.
| Types we quote | socket weld (SW) flanges, threaded (screwed) flanges, high-pressure (Class 1500/2500) flanges, plus blinds and spectacle blinds in the same class |
|---|---|
| Dimension standards | ASME B16.5 (NPS ½"–24"), ASME B16.47 Series A/B (NPS 26"–60"), EN 1092-1 (PN6–PN400) |
| Rating range | Class 150, 300, 400, 600, 900, 1500, 2500; PN6 to PN400 |
| Grades for Pune service | A105 for utilities and hydraulics; SS 304/316L for paint shop and chemical lines; alloy on request |
| Face options | RF, FF, RTJ, tongue & groove, male & female |
| Certificates | EN 10204 3.1 MTC with heat number on each piece; 3.2 on request |
| Dispatch | By road from Mumbai to Pune; lead time on the written quote |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in A105, SS 304/316, Class 150–2500, for engineering piping in Pune.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for aerospace & defence lines in Pune.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at chemical units in Pune.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Heavy machining, hydraulic loops, and tooling assemblies
Forged Hub Flanges, Threaded Couplings

High-precision components for aviation & defence systems
Nickel Alloy Flanges, High-Pressure SW Fittings

Highly corrosive acid loops & polymer synthesis lines
Stainless Steel 316L Flanges, Custom Forged Fittings
Route: Road freight from Mumbai to Pune. The lead time and delivery schedule depend on the items and testing ordered and are stated on the written quote. Packing: crates or pallets with rust-preventive coating. Docs: invoice, packing list, EN 10204 3.1 MTC, test reports as ordered.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































Yes. Socket weld and weld neck flanges to ASME B16.5 Class 1500 and 2500 in A105 or alloy, with the bore matched to the pipe schedule and an EN 10204 3.1 MTC.
Threaded or socket weld flanges in Class 150/300, A105 or galvanised, for small-bore lines, and slip-on flanges on larger headers.
Yes. Mark the urgent items on the RFQ, and the quote gives a lead time for each, so you can see which can go first.
Yes. SS 316L, duplex and alloy flanges to ASME B16.5 or EN 1092-1, with PMI and a 3.2 certificate quoted when the specification requires them.
Orders go by road from our Mumbai works. The lead time depends on the types, sizes and tests ordered, so it is stated item by item on the written quote for Pune rather than as a fixed number of days.
No. Manufacturing and testing are at our ISO 9001:2015 works in Mumbai, and Pune orders are sent from there by road. We have no office or warehouse in Pune.
EN 10204 3.1 mill test certificates, with dimensional reports and hydro, UT or PMI reports as ordered. A 3.2 certificate can be arranged when the specification calls for it.
Direct factory pricing. No public phone calls needed.