Threaded, socket weld and slip-on flanges for public works, water lines and building services in eastern Nagaland, made at our ISO 9001:2015 works in Mumbai and sent by road with EN 10204 3.1 certificates. The lead time is stated on your written quote.
Sanitary grade pipelines and food manufacturing lines: SS 304/316 Flanges, Buttweld Elbows.
Lead time for Tuensang is stated on your written quote.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades supplied with an EN 10204 3.1 MTC.

Flange orders from Tuensang are usually small and come from public works, water lines, hospitals and building services. Remax Forge supplies screwed flanges for building services, socket weld flanges for small-bore lines and ASME Class 150 flanges for these jobs, made in Mumbai and sent with an EN 10204 3.1 MTC. Nearby pages: Mokokchung and Kohima.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Tuensang, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Tuensang town is the headquarters of Tuensang district, described as the largest and easternmost district of Nagaland, and had 36,774 residents at the last census. The town was founded in 1947 to administer the then North East Frontier Agency area, and it is the base of the Eastern Nagaland Peoples' Organisation (ENPO), the Eastern Naga Students' Federation and the Khiamniungan Tribal Council.
In February 2026 the ENPO, the Government of India and the Government of Nagaland signed an agreement in New Delhi on a Frontier Nagaland Territorial Authority for the eastern districts. Public building, water and road works in a district headquarters of this kind are where flanges are needed, mostly in small sizes.
For a remote site, getting the order right first time matters more than speed. Send one line per flange with the nominal size, class or PN, facing, pipe schedule or bore, and material, and say whether the joint is screwed or welded. If a flange is being replaced, a photo next to a tape measure is enough for us to identify it.
| Service | Flanges & fittings usually specified |
|---|---|
| Building services and plumbing | Threaded flanges, Class 150, A105 or SS 304 |
| Generator fuel and small hot-water lines | Socket weld, Class 150/300, A105 |
| Water mains and pump sets | Slip-on RF, Class 150 or PN16 |
| Spare outlets | Blind flanges, Class 150 |
What we quote most often for Tuensang town, Public building and water works. Sizes, classes and grades below are those listed on our flange product pages; anything else is quoted against your specification.
| Types we quote | screwed flanges for building services, socket weld flanges for small-bore lines, ASME Class 150 flanges, plus blinds and spectacle blinds in the same class |
|---|---|
| Dimension standards | ASME B16.5 (NPS ½"–24"), ASME B16.47 Series A/B (NPS 26"–60"), EN 1092-1 (PN6–PN400) |
| Rating range | Class 150, 300, 400, 600, 900, 1500, 2500; PN6 to PN400 |
| Grades for Tuensang service | A105 for water and building services; SS 304 for hospital and kitchen lines |
| Face options | RF, FF, RTJ, tongue & groove, male & female |
| Certificates | EN 10204 3.1 MTC with heat number on each piece; 3.2 on request |
| Dispatch | By road from Mumbai to Tuensang; lead time on the written quote |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in SS 304/316, Class 150–2500, for food & agro piping in Tuensang.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for water & utility lines in Tuensang.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at water & utility units in Tuensang.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Sanitary grade pipelines and food manufacturing lines
SS 304/316 Flanges, Buttweld Elbows

Municipal water distribution, water treatment & supply mains
Mild Steel Flanges, Concentric Reducers, Weld Bends
Route: Road freight from Mumbai to Tuensang. The lead time and delivery schedule depend on the items and testing ordered and are stated on the written quote. Packing: crates or pallets with rust-preventive coating. Docs: invoice, packing list, EN 10204 3.1 MTC, test reports as ordered.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































The size, class or PN, facing, bore or pipe schedule and material. If the old flange has no markings, send the outside diameter, bolt circle and number of bolt holes, or a photo with a tape across it.
Socket weld gives a sealed welded joint and suits fuel and hot lines up to about 2 inches. Threaded flanges are used where welding is not possible on site. We quote both in Class 150 and 300.
Yes. SS 304 and SS 316 Class 150 slip-on, weld neck, threaded and blind flanges are made to ASME B16.5 with a 3.1 MTC.
Yes. We do not publish a minimum order. The quote is made for the quantity on your RFQ.
Orders go by road from our Mumbai works. The lead time depends on the types, sizes and tests ordered, so it is stated item by item on the written quote for Tuensang rather than as a fixed number of days.
No. Manufacturing and testing are at our ISO 9001:2015 works in Mumbai, and Tuensang orders are sent from there by road. We have no office or warehouse in Tuensang.
EN 10204 3.1 mill test certificates, with dimensional reports and hydro, UT or PMI reports as ordered. A 3.2 certificate can be arranged when the specification calls for it.