Threaded, slip-on and blind flanges for Mokokchung town water works and the village pumping schemes around it, made at our ISO 9001:2015 works in Mumbai and sent by road with EN 10204 3.1 certificates. The lead time is stated on your written quote.
Sanitary grade pipelines and food manufacturing lines: SS 304/316 Flanges, Buttweld Elbows.
Lead time for Mokokchung is stated on your written quote.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades supplied with an EN 10204 3.1 MTC.

Mokokchung is the main town of northern Nagaland, and the flanges bought here go mostly into water supply: the town system and the small pumping schemes in surrounding villages. Remax Forge supplies threaded flanges for galvanised water pipe, carbon steel slip-on flanges and blind flanges for washouts and tie-ins for these jobs from our Mumbai works with an EN 10204 3.1 MTC. Related pages: Wokha and Tuensang.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Mokokchung, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Mokokchung is the headquarters of Mokokchung district and the cultural centre of the Ao Nagas; it is also described as the most important urban centre in northern Nagaland. The Mokokchung sub-division of the Naga Hills district dates from 1889, and the town had 35,913 residents at the 2011 census.
Nagaland PHED's 2020-21 report lists a scheme to improve and restore water supply to Mokokchung town, and its 2022-23 report lists pumping projects in several Mokokchung villages under the Jal Jeevan Mission. Village schemes are small: a pump set, a rising main, a storage tank and a distribution network, often in 2 to 6 inch pipe.
Small schemes are where threaded flanges earn their place, because galvanised pipe can be joined at pump and tank outlets without site welding. Slip-on flanges are used where the pipe is welded, and a blind flange on each tank outlet leaves room for later extension. If the rest of the line is galvanised, say so on the RFQ and the quote will state the finish we can offer.
| Service | Flanges & fittings usually specified |
|---|---|
| Pump and tank outlets on galvanised pipe | Threaded flanges, Class 150 or PN16, A105 |
| Welded rising mains | Slip-on RF, PN10/PN16 or Class 150 |
| Tank outlets kept for extension | Blind flanges at the outlet PN |
| Valve chambers | Flanges drilled to the valve standard |
What we quote most often for Mokokchung town water supply, Village pumping schemes. Sizes, classes and grades below are those listed on our flange product pages; anything else is quoted against your specification.
| Types we quote | threaded flanges for galvanised water pipe, carbon steel slip-on flanges, blind flanges for washouts and tie-ins, plus blinds and spectacle blinds in the same class |
|---|---|
| Dimension standards | ASME B16.5 (NPS ½"–24"), ASME B16.47 Series A/B (NPS 26"–60"), EN 1092-1 (PN6–PN400) |
| Rating range | Class 150, 300, 400, 600, 900, 1500, 2500; PN6 to PN400 |
| Grades for Mokokchung service | A105 for threaded and welded water scheme flanges; SS 304 on request |
| Face options | RF, FF, RTJ, tongue & groove, male & female |
| Certificates | EN 10204 3.1 MTC with heat number on each piece; 3.2 on request |
| Dispatch | By road from Mumbai to Mokokchung; lead time on the written quote |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in SS 304/316, Class 150–2500, for food & agro piping in Mokokchung.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for hydro power lines in Mokokchung.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at hydro power units in Mokokchung.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Sanitary grade pipelines and food manufacturing lines
SS 304/316 Flanges, Buttweld Elbows

High-volume water diversion, penstocks & cooling loops
Large-Diameter Flanges, Concentric Reducers
Route: Road freight from Mumbai to Mokokchung. The lead time and delivery schedule depend on the items and testing ordered and are stated on the written quote. Packing: crates or pallets with rust-preventive coating. Docs: invoice, packing list, EN 10204 3.1 MTC, test reports as ordered.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































Yes, for small-bore galvanised pipe at modest pressure. They join without welding, which suits sites with no welding set. Give the pipe size and thread type (BSP or NPT) on the RFQ.
Yes. A threaded flange screws onto galvanised pipe without welding, so the pipe coating is not burnt off at the joint. If you need a coated flange as well, say so on the RFQ and the quote will state the finish we can offer.
Water schemes often specify EN 1092-1 PN10 or PN16, or IS 6392. We make flanges to ASME B16.5 and EN 1092-1; for IS 6392, send the dimensions and we will confirm on the quote whether we can match them.
Yes. Mark each line with its village or delivery point and the quote groups them, so a single order can be split on dispatch.
Orders go by road from our Mumbai works. The lead time depends on the types, sizes and tests ordered, so it is stated item by item on the written quote for Mokokchung rather than as a fixed number of days.
No. Manufacturing and testing are at our ISO 9001:2015 works in Mumbai, and Mokokchung orders are sent from there by road. We have no office or warehouse in Mokokchung.
EN 10204 3.1 mill test certificates, with dimensional reports and hydro, UT or PMI reports as ordered. A 3.2 certificate can be arranged when the specification calls for it.