Slip-on, blind and stainless flanges for the Ganeshnagar growth centre, the agro-food SEZ and the NIDC estate sheds, made at our ISO 9001:2015 works in Mumbai and sent by road with EN 10204 3.1 certificates. The lead time is stated on your written quote.
Heavy machining, hydraulic loops, and tooling assemblies: Forged Hub Flanges, Threaded Couplings.
Lead time for Dimapur is stated on your written quote.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades supplied with an EN 10204 3.1 MTC.

Most industrial flange orders from the Dimapur side come from food and agro units, either in the NIDC sheds in town or at the Ganeshnagar growth centre in Chumoukedima. Remax Forge sends SS 304 slip-on flanges for food lines, carbon steel slip-on flanges and blind flanges for spare nozzles to these buyers from our Mumbai works, each piece traceable to an EN 10204 3.1 MTC. Hill-town buyers can also see Kohima and Wokha.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Dimapur, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Nagaland's Industrial Growth Centre at Ganeshnagar, now in Chumoukedima district, was completed in December 2004 and opened in January 2005. The state government says 445 acres were acquired for it and the neighbouring EPIP/SEZ, and the industries department describes the agro and food processing SEZ there as the only SEZ in the North East. In 2026 an incubation centre for entrepreneurs was opened at the growth centre.
Closer to town, the Nagaland Industrial Development Corporation runs the Old and New Industrial Estates in Dimapur, about 30 acres between them with 25 ready-built sheds rented to small units. Units of this size usually have one boiler or hot-water generator, a compressed-air ring and a few process tanks, so their flange orders are a mixed list of a dozen sizes rather than a large run of one item.
Food lines are where grade matters most. Product-contact piping, CIP returns and tank outlets normally take SS 304 or SS 316 flanges, while the boiler house and utilities stay on A105 carbon steel. Put the service next to each line on the RFQ and we will quote the grade the service needs instead of one grade for the whole list.
| Service | Flanges & fittings usually specified |
|---|---|
| Product-contact and CIP lines | SS 304/316 slip-on or weld neck, PN10/PN16 or Class 150 |
| Boiler house and steam | A105 slip-on or weld neck RF, Class 150/300 |
| Tank outlets and spare nozzles | Blind flanges matched to the nozzle class |
| Compressed air and small-bore | Threaded or socket weld, Class 150/300 |
What we quote most often for Ganeshnagar Industrial Growth Centre, Agro and food processing SEZ, NIDC Old and New Industrial Estates. Sizes, classes and grades below are those listed on our flange product pages; anything else is quoted against your specification.
| Types we quote | SS 304 slip-on flanges for food lines, carbon steel slip-on flanges, blind flanges for spare nozzles, plus blinds and spectacle blinds in the same class |
|---|---|
| Dimension standards | ASME B16.5 (NPS ½"–24"), ASME B16.47 Series A/B (NPS 26"–60"), EN 1092-1 (PN6–PN400) |
| Rating range | Class 150, 300, 400, 600, 900, 1500, 2500; PN6 to PN400 |
| Grades for Dimapur service | SS 304/316 for food contact; A105 for steam, air and utilities |
| Face options | RF, FF, RTJ, tongue & groove, male & female |
| Certificates | EN 10204 3.1 MTC with heat number on each piece; 3.2 on request |
| Dispatch | By road from Mumbai to Dimapur; lead time on the written quote |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in A105, SS 304/316, Class 150–2500, for engineering piping in Dimapur.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for food & agro lines in Dimapur.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at food & agro units in Dimapur.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Heavy machining, hydraulic loops, and tooling assemblies
Forged Hub Flanges, Threaded Couplings

Sanitary grade pipelines and food manufacturing lines
SS 304/316 Flanges, Buttweld Elbows
Route: Road freight from Mumbai to Dimapur. The lead time and delivery schedule depend on the items and testing ordered and are stated on the written quote. Packing: crates or pallets with rust-preventive coating. Docs: invoice, packing list, EN 10204 3.1 MTC, test reports as ordered.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































SS 304 covers most product, water and CIP lines. SS 316 is the safer choice where brine, acids or chloride cleaning agents are used. Name the product and cleaning chemicals and we will confirm the grade on the quote.
Yes. List each item with its size, rating, facing and grade, and the quote prices them line by line, so a mixed list from a small unit can be ordered together.
Yes. Give the nozzle size, class or PN and facing, and we quote a blind flange drilled to match, in A105 or stainless.
Yes. We do not publish a minimum order; write the quantity you need on the RFQ and the quote is made for that quantity.
Orders go by road from our Mumbai works. The lead time depends on the types, sizes and tests ordered, so it is stated item by item on the written quote for Dimapur rather than as a fixed number of days.
No. Manufacturing and testing are at our ISO 9001:2015 works in Mumbai, and Dimapur orders are sent from there by road. We have no office or warehouse in Dimapur.
EN 10204 3.1 mill test certificates, with dimensional reports and hydro, UT or PMI reports as ordered. A 3.2 certificate can be arranged when the specification calls for it.