Blind flanges for water transmission mains, treatment plants, pumping stations and desalination plants: end closures, future tie-in points and hydrotest blanks, forged to ASME B16.5, B16.47 or EN 1092-1 drilling in carbon steel, stainless and duplex grades.
Remax Forge & Fittings is an ISO 9001:2015 certified manufacturer of forged flanges based in Mumbai, India. We deliver custom-engineered, fully-traceable forged piping components designed to meet strict industrial specifications for blind flange for water infrastructure industry across global infrastructure, chemical processing, oil & gas, and power generation projects.
Every flange stamped with heat number, pressure rating, grade & size.
Spectro PMI analysis, ultrasonic testing, hydrostatic testing & MTC 3.1/3.2.
Price, production time and freight terms confirmed in writing for your exact list.
Many valves, pumps and fittings in water systems are cast or ductile iron with flat-face flanges. Bolting a raised-face steel blind to a flat-face iron flange concentrates load at the centre and can crack the iron flange. Order the blind with a flat face (FF) and use a full-face gasket against iron equipment, and a raised face (RF) against steel flanges.
| Requirement | Options |
|---|---|
| Drilling | ASME B16.5 Class 150/300, ASME B16.47 for NPS 26"+, EN 1092-1 PN10/PN16/PN25 |
| Potable and process water | ASTM A105 with the coating your project specifies, or A182 F304L/F316L |
| Seawater, brine, RO high-pressure | ASTM A182 F51 duplex, F53 / F55 super duplex |
Blind thickness rises with size and class. Large-diameter blinds for hydrotest closures are heavy, so give the test pressure in the RFQ so the correct class is confirmed.
Transmission mains above NPS 24" fall outside ASME B16.5. Steel water pipelines are often flanged to AWWA C207, which has its own classes and drilling. Process piping on desalination and treatment plants more often uses ASME B16.47 Series A or B. These patterns are not interchangeable, so give the standard, class and nominal size of the flange the blind will bolt to, or send the mating flange drawing.
Bolting and gaskets complete the joint. State the gasket type (full-face rubber, spiral wound or ring) and the bolt material and coating your specification requires, so the blind face finish and bolt holes are confirmed against them in the quotation.
| Material Category | Grades / Specifications |
|---|---|
| Stainless Steel Blind Flange for Water Infrastructure Industry | ASTM/ASME A/SA182: F304, F304L, F316, F316L, F316H, F316Ti, F321, F347; Cast: CF3, CF3M, CF8, CF8M; DIN: 1.4301, 1.4306, 1.4401, 1.4404, 1.4408, 1.4409 |
| Duplex Steel Blind Flange for Water Infrastructure Industry | UNS S31803/S32205 — ASTM A182 Gr F51, F52, F53, F54, F55, F57, F59, F60, F61 |
| Super Duplex Blind Flange for Water Infrastructure Industry | UNS S32750/S32760 — ASTM A182 Gr F53, F55; Zeron 100 |
| Carbon Steel Blind Flange for Water Infrastructure Industry | ASTM/ASME A/SA105, A105N, A216-WCB; A350 LF2 (low temp); A694 F52/F56/F60/F65/F70/F80 (high yield); DIN 1.0460, 1.0402, 1.0619 |
| Alloy Steel Blind Flange for Water Infrastructure Industry | ASTM A182/ASME SA182: F5, F9, F11, F12, F22, F91 (all P-grades for high temp service) |
| Nickel Alloy Blind Flange for Water Infrastructure Industry | Inconel 600, 601, 625, 718, 690, X750 (ASTM B564/ASME SB564); Incoloy 800, 800H, 800HT, 825, 925 |
| Hastelloy Blind Flange for Water Infrastructure Industry | C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X (ASTM B564) |
| Monel Blind Flange for Water Infrastructure Industry | Monel 400 (UNS N04400), Monel K500 (UNS N05500) — ASTM B564 |
| Pure Nickel Blind Flange for Water Infrastructure Industry | Nickel 200, 201, 205, 205LC — ASTM B564/ASME SB564 |
| Copper Nickel Blind Flange for Water Infrastructure Industry | CuNi 90/10 (C70600), CuNi 70/30 (C71500), UNS C71640 — ASTM/ASME SB 61/62/151/152 |
| Titanium Blind Flange for Water Infrastructure Industry | Gr.1, Gr.2, Gr.4, Gr.5, Gr.7 — ASTM B381/ASME SB381; R50250/R50400/R50550/R50700/R52400/R53400/R56400 |
| Aluminium Blind Flange for Water Infrastructure Industry | 5052, 6061, 6063, 2017, 7075 |
| Brass Blind Flange for Water Infrastructure Industry | 3602, 2604, H59, H62 |
| Special Alloy Blind Flange for Water Infrastructure Industry | Alloy 20 (ASTM B462 SB462 — Carpenter 20Cb-3); SMO 254/6Mo (UNS S31254, DIN 1.4547); Al6XN; AISI 4130; AISI 4140; Nimonic 75/80A/90; Gunmetal; Cast Iron |
| Standard / Spec | Scope / Application Details |
|---|---|
| 🇺🇸ANSI/ASME B16.5 | NPS ½" to 24" — the primary standard for most flanges |
| 🇺🇸ASME B16.47 Series A (MSS SP-44) | NPS 26" to 60" — large diameter |
| 🇺🇸ASME B16.47 Series B (API 605) | NPS 26" to 60" — large diameter (lighter) |
| 🇺🇸ASME B16.36 | Orifice flanges |
| 🇺🇸ASME B16.48 | Line blinds & spectacle blinds |
| 🇪🇺DIN 2501 / EN 1092-1 | European metric standard — PN ratings |
| 🇯🇵JIS B2220 | Japanese Industrial Standard |
| 🇬🇧BS 4504 / BS 10 Table D/E/F/H | British Standard |
| 🇺🇸MSS SP-44 | Large diameter steel pipeline flanges |
| 🇺🇸API 6A | Wellhead and Christmas tree equipment |
| 🇺🇸API 605 | Large diameter carbon steel flanges |
| 🇺🇸AWWA C207 | Water works flanges |
| 🇷🇺GOST 12820 / 12821 | Russian/CIS standard |
| 🇦🇺AS 2129 / AS 4087 / AS/NZS 4331.1 | Australian standard |
| 🇰🇷KS B1503 | Korean standard |
| 🌐ISO 7005-1 / ISO 9624 | International standard |
| 🇺🇸SAE J518 | Hydraulic flanged tube fittings |
| 🇨🇳GB Standard | Chinese national standard |
Most common. A raised circular ring that concentrates pressure on a smaller area to compress the gasket. Height: 1/16" for Class 150/300; 1/4" for Class 400 and above.
No raised portion; entire flange face is in the same plane. Used when mating against cast iron or non-metallic flanges to avoid cracking on bolt tightening.
Oval or octagonal groove machined into the face; a metal ring gasket seats in the groove. Used in high-pressure, high-temperature critical service (refineries, oil fields).
One flange has a raised ring (tongue); the other a matching groove. Provides excellent alignment and a confined gasket. Used in pumps and valve bonnets.
Similar to T&G but the female face is flat and the male face raised. Used in heat exchangers, pressure vessels, and high-integrity process joints.
Same operating principle as the standard Male & Female flange, scaled up with larger step contact surfaces for specialized heavy industrial equipment.
Each flange pressure tested at 1.5x working pressure per ASME code requirements.
Non-destructive testing to detect internal sub-surface cracks, inclusions and forging defects.
100% radiography available; mandatory for critical Class 900+ high pressure services.
Spectrometer validation to verify alloy chemistry precisely matches the Mill Test Certificate.
Detects micro surface cracking and porosity on critical machined seating surfaces.
For ferromagnetic alloys; flags surface and near-surface structural discontinuities.
Verifies correct heat treatment structure and ensures mechanical properties are hit.
In-house lab chemical checks of billets before forging process begins.
Crucial for low-temperature applications to verify ductility (e.g. A350 LF2, LTCS).
Verifies sour-gas / H2S environment service capability (NACE MR0175 / MR0103).
Provided as per EN 10204 3.1 detailing chemical & mechanical analysis.
Independent third-party inspection validation (available upon request).
Certified suitability for sour gas/H2S environments.
Provides 100% trace origin tracking from steel billet to finished flange.
All critical tolerances checked and certified against CAD designs.
HTR and PWHT thermal chart records included where requested.
Pressure log documentation verifying weld integrity.
Bureau Veritas, SGS, Lloyds, DNV, TUV inspection options.
Proper documentation for simple custom clearance and cargo log.
Enables import tariff relief and compliance logging.
Use flat face (FF) with a full-face gasket when the mating flange is cast or ductile iron, as on many valves and pumps. Use raised face (RF) when the mating flange is a steel raised-face flange.
Yes. EN 1092-1 PN-rated blind flanges are made to order. State the PN rating and DN in the RFQ.
Duplex F51 or super duplex F53/F55 are commonly specified on seawater and brine lines, and stainless 316L on product water. The project specification decides.
The blind must be rated for the test pressure at test temperature. Give us the test pressure and the line's flange class, and the quotation will confirm a suitable rating.
Remax Forge & Fittings stands out as a leading flange manufacturer due to our complete in-house forging, heat treatment, and precision CNC machining capabilities based in Mumbai. We provide certified compliance, factory-direct wholesale pricing, and custom forging schedules tailored to your engineering blueprints. With over 20 years of manufacturing experience, zero-defect quality management, and short lead times, we are a trusted supply partner for critical industrial piping projects.
Fully audited quality management workflows.
Forging, heat-treat, machining in Mumbai.
PMI, Spectro, UT, Hydro labs on-site.
EN 10204 3.1 standard; 3.2 available.
Serving critical gas/oil clients globally.
Proven global logistics and documentation.
Special shapes, alloys and schedules.
Competitive pricing with no agent markup.
Engineers ready to assist spec selection.
Fast turnaround of custom and stock orders.
Ordering high-quality forged flanges from Remax is straightforward. To ensure our engineering team provides you with a precise and competitive quote, please specify the exact flange type, nominal pipe size (NPS), pressure class rating, material grade, and facing configuration. Let us know your total quantity requirements and if you require any specialized testing or custom coatings. Contact us via email or phone.
Send us your drawing, specifications, or inquiry details. Our technical engineering team will review your specs and provide a firm written quotation with price, production time and EN 10204 3.1 certification.