Duplex 2205 flange manufacturer, Mumbai. UNS S31803/S32205 F51/F60, high yield 450 MPa, PREN >=34. Seawater & oilfield spec. Get a written quote.
Duplex 2205 (UNS S31803 / S32205) features a dual-phase 50/50 ferrite-austenite microstructure, providing double the mechanical yield strength of standard 316L alongside superior resistance to chloride stress corrosion cracking.
Governing specification limits per ASTM / ASME standards. Actual values provided on EN 10204 3.1 MTC.
| Element | Specification Limit / Composition |
|---|---|
| Chromium (Cr) | 22.0 - 23.0% |
| Molybdenum (Mo) | 3.00 - 3.50% |
| Nickel (Ni) | 4.50 - 6.50% |
| Nitrogen (N) | 0.14 - 0.20% |
| Property | Specification Limit |
|---|---|
| Yield Strength (0.2% Offset) | 450 MPa (65 ksi) min |
| Tensile Strength | 620 MPa (90 ksi) min |
| Hardness | 293 HBW max |
| PREN | ≥ 34 |
| Service Temp | Class 150 | Class 300 | Class 600 | Class 900 |
|---|---|---|---|---|
| Ambient (-29 to 38°C) | 290 psi | 750 psi | 1500 psi | 2250 psi |
Both are 22% chromium duplex. F51 is UNS S31803, the original composition. F60 is UNS S32205, which raises the minimum nitrogen, chromium and molybdenum for a more consistent PREN of about 35. Many buyers order dual-certified S31803/S32205 so the flange meets either designation.
The roughly balanced ferrite and austenite structure gives about twice the yield strength of 316L, so wall thickness on matching pipe can often be reduced, and chloride stress corrosion cracking resistance is far higher than austenitic grades.
Duplex is not used for sustained service above about 300°C, because the ferrite phase embrittles in the 475°C range over time. At the low end its toughness falls faster than austenitic stainless, so impact-tested material is specified for cold service. Inside that window it is a common choice for seawater cooling, desalination, chemical tankers, pulp and paper, and offshore process lines.
Flanges in Duplex 2205 Flanges are manufactured via precision closed-die or open-die forging to establish continuous metallurgical grain flow along the flange hub and neck contour. Raw billets are heated in calibrated gas-fired furnaces under strictly controlled soak temperatures to eliminate microstructural defects.
Depending on the alloy grade, components undergo certified thermal conditioning: normalizing for carbon steels (A105N, A350 LF2), rapid water quench solution annealing at 1040°C–1120°C for stainless and duplex grades, or controlled aging for nickel superalloys. This ensures exceptional notch toughness, yield strength, and resistance to stress corrosion cracking.
Final machining is executed on heavy-duty CNC turning centers to guarantee precise raised face, flat face, or ring type joint (RTJ) dimensions compliant with ASME B16.5, ASME B16.47, DIN, or EN 1092-1 standards. Gasket contact surfaces receive spiral or concentric serrations strictly controlled between 125 and 250 µin Ra.
Every production heat is issued with an EN 10204 Type 3.1 inspection certificate containing full heat chemistry, mechanical tensile test data, and Charpy impact values. Independent Third-Party Inspection (TPI) by Lloyd's, BV, DNV-GL, TÜV, and SGS is readily accommodated for global EPC and refinery contracts.
A: Duplex 2205 is limited to 315°C (600°F). Sustained operation above 300-315°C leads to embrittlement due to 475°C phase precipitation and sigma phase formation.
A: Yes, dissimilar welds between duplex and austenitic stainless are routine, usually with a duplex-type filler. The welding procedure must be qualified for the combination.
A: It handles many seawater duties at ambient temperature, but for warm or chlorinated seawater and critical firewater lines many specifications step up to super duplex F53 or F55.
A: EN 10204 3.1 certificate with chemistry, mechanicals, heat treatment and any ferrite or corrosion tests ordered. PMI is carried out on stainless and duplex lots.
Written commercial offer with Mill Test Certificate guarantee.