Material Grade Specification

Super Duplex 2507 Flanges — ASTM A182 Grade F53

Super Duplex 2507 flange manufacturer, Mumbai. UNS S32750 F53, PREN >=42, high yield 550 MPa. Sour gas & deepwater subsea spec. Get a written quote.

Material Specification & Overview

Super Duplex 2507 (UNS S32750) delivers extreme resistance to localized pitting and crevice corrosion with PREN ≥ 42, engineered for severe marine, subsea oilfield, and aggressive acid processing.

UNS DesignationS32750 (F53)
Governing StandardASTM A182 / ASME SA-182 Grade F53

Chemical Composition (wt %)

Governing specification limits per ASTM / ASME standards. Actual values provided on EN 10204 3.1 MTC.

ElementSpecification Limit / Composition
Chromium (Cr)24.0 - 26.0%
Molybdenum (Mo)3.0 - 5.0%
Nickel (Ni)6.0 - 8.0%
Nitrogen (N)0.24 - 0.32%

Mechanical Properties

PropertySpecification Limit
Yield Strength550 MPa (80 ksi) min
Tensile Strength795 MPa (116 ksi) min
Hardness310 HBW max
PREN≥ 42

Pressure-Temperature Rating Reference

Service TempClass 150Class 300Class 600Class 900
Ambient (-29 to 38°C)290 psi750 psi1500 psi2250 psi

Primary Industry Applications

Deepwater subsea Christmas trees and manifold hubs
Sour gas (H2S) processing lines complying with NACE MR0175
High-concentration warm seawater piping
Flue-gas desulfurization (FGD) scrubber systems

F53 (2507) against F55 and 2205

F53 is UNS S32750, nominally 25% chromium, 7% nickel and about 4% molybdenum with high nitrogen. F55 is UNS S32760, a similar 25% chromium alloy with copper and tungsten additions. Both give PREN of 40 or more, against about 35 for 2205, which is why they are used where 2205 is close to its limit in warm or chlorinated seawater.

Minimum yield strength is well above 2205, so super duplex flanges are often specified on high-pressure water injection, firewater ring mains, seawater lift and subsea tie-ins where weight and strength both matter.

Tests commonly written into super duplex specifications

  • ASTM G48 ferric chloride pitting test at a stated temperature.
  • ASTM A923 for intermetallic phases.
  • Ferrite content within a stated range.
  • Charpy impact tests at low temperature, often -46°C.
  • Hardness limits when the line is in sour service under NACE MR0175 / ISO 15156.

Ordering super duplex correctly

State the UNS number, not just "super duplex", because F53 and F55 are not always accepted as substitutes for each other. List each test and its acceptance criteria. Super duplex forgings need fast quenching after solution annealing, so heavy sections are reviewed for section thickness before a quote is confirmed.

Forging, Heat Treatment & Quality Inspection Protocols

Forging & Thermal Processing

Flanges in Super Duplex 2507 Flanges are manufactured via precision closed-die or open-die forging to establish continuous metallurgical grain flow along the flange hub and neck contour. Raw billets are heated in calibrated gas-fired furnaces under strictly controlled soak temperatures to eliminate microstructural defects.

Depending on the alloy grade, components undergo certified thermal conditioning: normalizing for carbon steels (A105N, A350 LF2), rapid water quench solution annealing at 1040°C–1120°C for stainless and duplex grades, or controlled aging for nickel superalloys. This ensures exceptional notch toughness, yield strength, and resistance to stress corrosion cracking.

Dimensional Tolerances & Certification

Final machining is executed on heavy-duty CNC turning centers to guarantee precise raised face, flat face, or ring type joint (RTJ) dimensions compliant with ASME B16.5, ASME B16.47, DIN, or EN 1092-1 standards. Gasket contact surfaces receive spiral or concentric serrations strictly controlled between 125 and 250 µin Ra.

Every production heat is issued with an EN 10204 Type 3.1 inspection certificate containing full heat chemistry, mechanical tensile test data, and Charpy impact values. Independent Third-Party Inspection (TPI) by Lloyd's, BV, DNV-GL, TÜV, and SGS is readily accommodated for global EPC and refinery contracts.

Related Products & Industry Guides

Frequently Asked Procurement Questions

Q: What does PREN ≥ 42 signify for Super Duplex 2507?

A: PREN (Pitting Resistance Equivalent Number = %Cr + 3.3%Mo + 16%N) quantifies resistance to localized pitting. A score ≥ 42 guarantees immunity to pitting in high-temperature seawater and chloride-saturated environments.

Q: Can F53 replace F55 flanges?

A: Only if your client or specification accepts it. The alloys perform similarly, but many oil and gas specifications name one UNS number, and the substitution needs written approval.

Q: What is the upper temperature limit for 2507?

A: Like 2205, super duplex is generally not used for sustained service above about 250 to 300°C because of embrittlement of the ferrite phase. The design code sets the exact limit.

Q: Do super duplex flanges need special gaskets?

A: Gasket material should be compatible with seawater and the alloy, typically spiral wound with a super duplex or alloy winding, or an insulating gasket where dissimilar metals meet. Your piping specification decides.

Direct Factory Pricing

Get a Quote for Super Duplex 2507 Flanges

Written commercial offer with Mill Test Certificate guarantee.