Flange Manufacturer & Supplier for Bathinda
Flanges, butt-weld and forged fittings for Bathinda's refinery, fertilizer and power & boiler units, made at our ISO 9001:2015 works in Mumbai, dispatched from stock in 24–48 h and delivered in about 3 days, with EN 10204 3.1 certificates.
Oil & Gas (Refining)
Hydrocarbon processing, thermal cracking & high-temp lines: Alloy Steel Flanges, RTJ Joints, High-Pressure Fittings.
~3-day delivery via NH48+NH52 via Jaipur
Ex-stock dispatch from Mumbai in 24–48 h, then road freight to Bathinda.
EN 10204 3.1 MTC
Heat numbers marked on every piece; third-party inspection accepted.
Grades: A105, F11/F22, SS 316L, Duplex 2205
Carbon, alloy, stainless and duplex grades held in stock.
Piping & Forged Fittings Solutions for Bathinda
Supplying Bathinda means understanding HMEL Guru Gobind Singh Refinery, NFL fertilizer plant, thermal legacy. Remax Forge ships weld neck flanges, spectacle blind flanges and butt weld elbows from Mumbai into HMEL refinery zone, NFL township — A105, F11/F22, SS 316L, Duplex 2205, ASME B16.5/B16.11 dimensions, EN 10204 3.1 MTC on every lot.
ISO 9001:2015 Certified Quality & Material Testing
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Bathinda, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Flange Supply for Bathinda's Refinery, Fertilizer and Power Units
Bathinda's demand for flanges and fittings comes mainly from HMEL Guru Gobind Singh Refinery, NFL fertilizer plant, thermal legacy. Refinery and terminal piping runs mostly on A105 and A350 LF2 weld neck flanges in Class 150–600, with RTJ faces from Class 900 up and F11/F22 alloy flanges on heater and hot-oil service. Ammonia-urea plants need low-temperature LF2 forgings, stainless and super duplex flanges and forged tees for high-pressure synthesis loops. Power stations and boiler houses buy A105 and alloy F11/F22/F91 weld neck flanges and fittings for steam, feedwater and blow-down lines, with IBR documents where the line falls under the Indian Boiler Regulations.
Orders for Bathinda leave our Mumbai stock within 24–48 hours and travel by road on NH48+NH52 via Jaipur, so material is usually on site in about 3 days. Custom forgings and non-stock sizes take 7–15 working days. To quote quickly we need the size (NPS or DN), pressure class, facing (RF, FF or RTJ), material grade and the schedule of the mating pipe.
Every lot ships with an EN 10204 3.1 mill test certificate, and heat numbers are marked on each piece so they can be traced back to it. Alloy and stainless items can be PMI-checked before dispatch, and inspection by your own or a third-party agency is welcome at our works. Steam-line items for boiler work can be supplied with IBR documents. We use the same route to serve Patiala, Jalandhar, Amritsar and Ludhiana, so mixed orders for plants in the region can be planned together.
Industrial areas we deliver to
- HMEL refinery zone
- NFL township
- Patiala: nearby city on the same dispatch route
- Jalandhar: nearby city on the same dispatch route
- Amritsar: nearby city on the same dispatch route
- Ludhiana: nearby city on the same dispatch route
Typical specifications by service in Bathinda
| Service | Flanges & fittings usually specified |
|---|---|
| Hydrocarbon process lines | A105 / A350 LF2 weld neck RF flanges, Class 150–600; RTJ for Class 900 and above |
| Ammonia service | A350 LF2 weld neck flanges and A420 WPL6 fittings |
| Main steam & feedwater | A182 F11 / F22 / F91 weld neck flanges, Class 600–2500, IBR where applicable |
| Heater & hot-oil piping | A182 F11 / F22 / F5 flanges with A234 WP11 / WP22 fittings |
| Urea & carbamate lines | SS 316L (urea grade where specified) or super duplex F53 |
| Auxiliary steam & drains | A105 flanges with 3000# / 6000# socket-weld fittings |
Flanges & Forged Fittings We Supply
Industrial Flanges
Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in A105, F11/F22, SS 316L, Duplex 2205, Class 150–2500, for refinery piping in Bathinda.
Buttweld Fittings
ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for fertilizer lines in Bathinda.
Socket Weld Fittings
ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at power & boiler units in Bathinda.
Why Buyers Choose Remax Forge & Fittings
ISO 9001:2015 Certified
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC Machining & Custom Parts
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
Global Export Footprint
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Technical Consultancy
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Industries We Empower
Precision-engineered components for mission-critical environments.
Oil & Gas (Refining)
Hydrocarbon processing, thermal cracking & high-temp lines
Alloy Steel Flanges, RTJ Joints, High-Pressure Fittings
Fertilizers
Corrosive chemical transfer & high-pressure piping networks
Super Duplex Flanges, Custom Forged Tees
Power & Boilers
Superheated steam lines, IBR boiler circuits & exhaust pipes
Alloy Steel P91/F22 Flanges, IBR Fittings
Getting it to Bathinda
Shipping & Transit Details
Transit Summary
Route: NH48+NH52 via Jaipur. Ex-stock dispatch 24–48 h from Mumbai; road freight ≈ 3 days to Bathinda. Custom forgings: 7–15 working days. Packing: seaworthy crates/pallets with rust-preventive coating. Docs: invoice, packing list, 3.1 MTC, test reports, IBR documentation where applicable.
Seaworthy Packing
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Documents Pack
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.
Our Clients
FAQs
We deliver Weld Neck Flanges, Spectacle Blind Flanges, Butt Weld Elbows and Lap Joint Flanges to Bathinda in A105, F11/F22, SS 316L, Duplex 2205, dimensioned to ASME B16.5, B16.47 and B16.11. Demand here comes mainly from oil & gas (refining) and fertilizers — including units around HMEL refinery zone — and every lot ships with EN 10204 3.1 certification.
Yes. For refinery and hydrocarbon service near HMEL Guru Gobind Singh Refinery we supply weld neck and RTJ-faced flanges plus spectacle blinds in A105, F11/F22, SS 316L and Duplex 2205, compliant with NACE MR0175 where specified. Third-party (3.2) inspection can be arranged on request.
Honestly: ex-stock items dispatch from our Mumbai warehouse within 24–48 hours and reach Bathinda in roughly 3 days by road (NH48+NH52 via Jaipur). Custom forgings add 7–15 working days of production. We confirm a dated schedule with every quotation rather than promising blanket next-day delivery.
We deliver door-to-site across Bathinda, including HMEL refinery zone and NFL township, and to nearby Patiala, Jalandhar, Amritsar and Ludhiana. Goods leave our Mumbai stock within 24–48 hours and travel by road on NH48+NH52 via Jaipur, normally arriving in about 3 days.
No — and we say so plainly. Manufacturing, stock and testing are at our ISO 9001:2015 facility in Mumbai; Bathinda is served through scheduled road dispatches with full documentation. Buyers are welcome to audit the Mumbai works in person or by video inspection before ordering.
Every Bathinda dispatch includes EN 10204 3.1 mill test certificates, dimensional reports and hydro/NDT test reports as ordered, IBR documentation for steam-service items, NACE MR0175 compliance and 3.2 third-party inspection on request. 100% PMI is standard on alloy and stainless lots.
We keep MOQs low for the Bathinda corridor — small lots are clubbed with our scheduled dispatches on this route, so a single-item trial order is workable. Project-quantity rates apply from roughly 100 pieces or 500 kg per grade.