FlangesComparison / DecisionClass 150 vs Class 300 Flange — What Changes

Class 150 vs Class 300 Flange — What Changes

Class 150 and Class 300 are the two most common ASME B16.5 pressure classes. They look alike but differ in thickness, outside diameter, bolting and allowable pressure, and they will not bolt together. This guide compares them for carbon steel A105 and explains when to step up.

EN 10204 3.1 MTC & third-party inspection allowed

Technical Overview & Sourcing Context

Remax Forge & Fittings is an ISO 9001:2015 certified manufacturer of forged flanges based in Mumbai, India. We deliver custom-engineered, fully-traceable forged piping components designed to meet strict industrial specifications for class 150 vs class 300 flange across global infrastructure, chemical processing, oil & gas, and power generation projects.

Full Traceability

Every flange stamped with heat number, pressure rating, grade & size.

Zero-Defect Quality

Spectro PMI analysis, ultrasonic testing, hydrostatic testing & MTC 3.1/3.2.

Written Quotation

Price, production time and freight terms confirmed in writing for your exact list.

Pressure ratings for A105 (Group 1.1)

TemperatureClass 150Class 300
-29 to 38°C19.6 bar (285 psig)51.1 bar (740 psig)
200°C13.8 bar43.8 bar

Values are from the ASME B16.5 rating table for Group 1.1 materials. Ratings fall as temperature rises, and Class 150 falls faster, so a Class 150 flange that is fine at ambient can be undersized at a few hundred degrees. Always check at design temperature, not only at design pressure.

Dimensional differences

  • Class 300 flanges are thicker and larger in outside diameter for the same nominal size.
  • Bolt circles differ, and in many sizes Class 300 has more bolts. At NPS 2, Class 150 has 4 bolts and Class 300 has 8.
  • Both have the same 1/16 inch raised face height under B16.5.
  • Weight rises with class, which affects supports on large lines.

Which class to choose

The piping class sets the flange class from design pressure, design temperature and material group. Class 150 covers most low-pressure utility, water and atmospheric tank connections. Class 300 is common on process lines, steam and hot oil. If a valve or equipment nozzle is Class 300, the mating flange must be Class 300 even if the pipe pressure is low.

Common mistakes

  • Ordering by pressure only and ignoring temperature.
  • Mixing Class 150 and Class 300 at a valve; the drilling will not match.
  • Assuming PN16 or PN40 drilling matches Class 150 or 300; it does not.
Material CategoryGrades / Specifications
Stainless Steel Class 150 vs Class 300 Flange — What ChangesASTM/ASME A/SA182: F304, F304L, F316, F316L, F316H, F316Ti, F321, F347; Cast: CF3, CF3M, CF8, CF8M; DIN: 1.4301, 1.4306, 1.4401, 1.4404, 1.4408, 1.4409
Duplex Steel Class 150 vs Class 300 Flange — What ChangesUNS S31803/S32205 — ASTM A182 Gr F51, F52, F53, F54, F55, F57, F59, F60, F61
Super Duplex Class 150 vs Class 300 Flange — What ChangesUNS S32750/S32760 — ASTM A182 Gr F53, F55; Zeron 100
Carbon Steel Class 150 vs Class 300 Flange — What ChangesASTM/ASME A/SA105, A105N, A216-WCB; A350 LF2 (low temp); A694 F52/F56/F60/F65/F70/F80 (high yield); DIN 1.0460, 1.0402, 1.0619
Alloy Steel Class 150 vs Class 300 Flange — What ChangesASTM A182/ASME SA182: F5, F9, F11, F12, F22, F91 (all P-grades for high temp service)
Nickel Alloy Class 150 vs Class 300 Flange — What ChangesInconel 600, 601, 625, 718, 690, X750 (ASTM B564/ASME SB564); Incoloy 800, 800H, 800HT, 825, 925
Hastelloy Class 150 vs Class 300 Flange — What ChangesC276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X (ASTM B564)
Monel Class 150 vs Class 300 Flange — What ChangesMonel 400 (UNS N04400), Monel K500 (UNS N05500) — ASTM B564
Pure Nickel Class 150 vs Class 300 Flange — What ChangesNickel 200, 201, 205, 205LC — ASTM B564/ASME SB564
Copper Nickel Class 150 vs Class 300 Flange — What ChangesCuNi 90/10 (C70600), CuNi 70/30 (C71500), UNS C71640 — ASTM/ASME SB 61/62/151/152
Titanium Class 150 vs Class 300 Flange — What ChangesGr.1, Gr.2, Gr.4, Gr.5, Gr.7 — ASTM B381/ASME SB381; R50250/R50400/R50550/R50700/R52400/R53400/R56400
Aluminium Class 150 vs Class 300 Flange — What Changes5052, 6061, 6063, 2017, 7075
Brass Class 150 vs Class 300 Flange — What Changes3602, 2604, H59, H62
Special Alloy Class 150 vs Class 300 Flange — What ChangesAlloy 20 (ASTM B462 SB462 — Carpenter 20Cb-3); SMO 254/6Mo (UNS S31254, DIN 1.4547); Al6XN; AISI 4130; AISI 4140; Nimonic 75/80A/90; Gunmetal; Cast Iron
Standard / SpecScope / Application Details
🇺🇸ANSI/ASME B16.5NPS ½" to 24" — the primary standard for most flanges
🇺🇸ASME B16.47 Series A (MSS SP-44)NPS 26" to 60" — large diameter
🇺🇸ASME B16.47 Series B (API 605)NPS 26" to 60" — large diameter (lighter)
🇺🇸ASME B16.36Orifice flanges
🇺🇸ASME B16.48Line blinds & spectacle blinds
🇪🇺DIN 2501 / EN 1092-1European metric standard — PN ratings
🇯🇵JIS B2220Japanese Industrial Standard
🇬🇧BS 4504 / BS 10 Table D/E/F/HBritish Standard
🇺🇸MSS SP-44Large diameter steel pipeline flanges
🇺🇸API 6AWellhead and Christmas tree equipment
🇺🇸API 605Large diameter carbon steel flanges
🇺🇸AWWA C207Water works flanges
🇷🇺GOST 12820 / 12821Russian/CIS standard
🇦🇺AS 2129 / AS 4087 / AS/NZS 4331.1Australian standard
🇰🇷KS B1503Korean standard
🌐ISO 7005-1 / ISO 9624International standard
🇺🇸SAE J518Hydraulic flanged tube fittings
🇨🇳GB StandardChinese national standard
Raised Gasket Area

Raised Face (RF)

Most common. A raised circular ring that concentrates pressure on a smaller area to compress the gasket. Height: 1/16" for Class 150/300; 1/4" for Class 400 and above.

100% Flat Mating Surface

Flat Face (FF)

No raised portion; entire flange face is in the same plane. Used when mating against cast iron or non-metallic flanges to avoid cracking on bolt tightening.

Deep Metallic Ring Groove

Ring Type Joint (RTJ)

Oval or octagonal groove machined into the face; a metal ring gasket seats in the groove. Used in high-pressure, high-temperature critical service (refineries, oil fields).

Interlocking Alignment

Tongue & Groove (T&G)

One flange has a raised ring (tongue); the other a matching groove. Provides excellent alignment and a confined gasket. Used in pumps and valve bonnets.

Recessed Female Mating

Male & Female (M&F)

Similar to T&G but the female face is flat and the male face raised. Used in heat exchangers, pressure vessels, and high-integrity process joints.

Heavy-Duty Contact

Large Male & Female

Same operating principle as the standard Male & Female flange, scaled up with larger step contact surfaces for specialized heavy industrial equipment.

Hydrostatic / Hydro Pressure Test

Each flange pressure tested at 1.5x working pressure per ASME code requirements.

Ultrasonic Testing (UT)

Non-destructive testing to detect internal sub-surface cracks, inclusions and forging defects.

Radiographic Testing (RT / X-Ray)

100% radiography available; mandatory for critical Class 900+ high pressure services.

Positive Material Identification (PMI)

Spectrometer validation to verify alloy chemistry precisely matches the Mill Test Certificate.

Dye Penetrant Test (DPT / LPT)

Detects micro surface cracking and porosity on critical machined seating surfaces.

Magnetic Particle Inspection (MPI)

For ferromagnetic alloys; flags surface and near-surface structural discontinuities.

Hardness Test (Brinell/Rockwell)

Verifies correct heat treatment structure and ensures mechanical properties are hit.

Direct-Reading Spectrograph

In-house lab chemical checks of billets before forging process begins.

Impact / Charpy Test

Crucial for low-temperature applications to verify ductility (e.g. A350 LF2, LTCS).

NACE Compliance Testing

Verifies sour-gas / H2S environment service capability (NACE MR0175 / MR0103).

Mill Test Certificate (MTC)

Provided as per EN 10204 3.1 detailing chemical & mechanical analysis.

EN 10204 3.2 Certificate

Independent third-party inspection validation (available upon request).

NACE MR0175 / MR0103 Compliance

Certified suitability for sour gas/H2S environments.

Raw Materials Certificate

Provides 100% trace origin tracking from steel billet to finished flange.

Dimensional Inspection Report

All critical tolerances checked and certified against CAD designs.

Heat Treatment Certificate

HTR and PWHT thermal chart records included where requested.

Hydrostatic Test Certificate

Pressure log documentation verifying weld integrity.

Third Party Inspection (TPI)

Bureau Veritas, SGS, Lloyds, DNV, TUV inspection options.

Packing List & Weight Certificate

Proper documentation for simple custom clearance and cargo log.

Country of Origin Certificate

Enables import tariff relief and compliance logging.

🔒 Certified Compliance Guaranteed

Frequently Asked Questions

Q: Can a Class 300 flange be used where Class 150 is specified?

It is stronger, but it will not bolt to Class 150 mating flanges or valves. Both sides of the joint must be the same class.

Q: What is the hydrotest pressure for a Class 150 flange?

ASME B16.5 shell test pressure is 1.5 times the 38°C rating, rounded up. Your piping code sets the system test pressure.

Q: Are Class 150 and PN20 the same?

They are often listed as equivalent in pressure, but drilling and dimensions differ from EN 1092-1 PN flanges, so they are not interchangeable.

Q: Does stainless steel change the rating?

Yes. Stainless grades are in different material groups with different ratings. Check the table for the group of the grade you order.

Why Choose Remax Forge?

Remax Forge & Fittings stands out as a leading flange manufacturer due to our complete in-house forging, heat treatment, and precision CNC machining capabilities based in Mumbai. We provide certified compliance, factory-direct wholesale pricing, and custom forging schedules tailored to your engineering blueprints. With over 20 years of manufacturing experience, zero-defect quality management, and short lead times, we are a trusted supply partner for critical industrial piping projects.

ISO 9001:2015 Certified

Fully audited quality management workflows.

In-House Forging

Forging, heat-treat, machining in Mumbai.

Testing Laboratory

PMI, Spectro, UT, Hydro labs on-site.

Mill Certificates

EN 10204 3.1 standard; 3.2 available.

20+ Years Experience

Serving critical gas/oil clients globally.

45+ Export Countries

Proven global logistics and documentation.

Custom Forging

Special shapes, alloys and schedules.

Factory-Direct Price

Competitive pricing with no agent markup.

Technical Support

Engineers ready to assist spec selection.

Short Lead Times

Fast turnaround of custom and stock orders.

Global Export Network

AmericasUSA (Texas, Houston, Louisiana), Canada, Brazil, Colombia, Mexico
Middle EastUAE (Dubai, Abu Dhabi), Saudi Arabia, Qatar, Kuwait, Oman, Bahrain, Iraq, Iran
AfricaNigeria (Lagos, Port Harcourt), Ghana, South Africa, Egypt, Kenya, Libya
EuropeGermany, Italy, Netherlands, Norway (Stavanger), Spain, France, UK
Asia-PacificSingapore, Malaysia, Indonesia, Vietnam, Australia, South Korea, Japan
Central AsiaKazakhstan, Azerbaijan, Turkmenistan
🌍 Trusted logistics across 6 continents
Procurement Process

How to Order

Ordering high-quality forged flanges from Remax is straightforward. To ensure our engineering team provides you with a precise and competitive quote, please specify the exact flange type, nominal pipe size (NPS), pressure class rating, material grade, and facing configuration. Let us know your total quantity requirements and if you require any specialized testing or custom coatings. Contact us via email or phone.

1Flange Type (e.g. Weld Neck, Slip On, Blind, etc.)
2Size — NPS (Nominal Pipe Size) in inches (e.g. 2", 4", 10")
3Pressure Class (e.g. 150#, 300#, 600#, 900#, 1500#, 2500#)
4Material Grade (e.g. ASTM A105, A182 F316L, A182 F51)
5Facing Type (RF / FF / RTJ / T&G / M&F)
6Quantity required
7Standard / Specification (ASME B16.5, DIN, JIS, etc.)
8Any special requirements (NACE, low-temp, PMI, 3rd party inspection, surface coating)

Direct Inquiries

Estimated Lead Times

Standard sizes & specs:7–14 days
Special alloys / customs:3–6 weeks

Ready to Quote Your Custom Flange Project?

Send us your drawing, specifications, or inquiry details. Our technical engineering team will review your specs and provide a firm written quotation with price, production time and EN 10204 3.1 certification.