FlangesComparison / DecisionRTJ vs Raised Face (RF) Flange — Which to Specify

RTJ vs Raised Face (RF) Flange — Which to Specify

Raised face (RF) and ring type joint (RTJ) are the two face types most often specified on ASME B16.5 steel flanges. RF suits most process service up to Class 600; RTJ is used where pressure, temperature or fire safety call for a metal-to-metal seal. This guide compares them so you can specify the right face on a quote.

EN 10204 3.1 MTC & third-party inspection allowed

Technical Overview & Sourcing Context

Remax Forge & Fittings is an ISO 9001:2015 certified manufacturer of forged flanges based in Mumbai, India. We deliver custom-engineered, fully-traceable forged piping components designed to meet strict industrial specifications for rtj vs raised face flange across global infrastructure, chemical processing, oil & gas, and power generation projects.

Full Traceability

Every flange stamped with heat number, pressure rating, grade & size.

Zero-Defect Quality

Spectro PMI analysis, ultrasonic testing, hydrostatic testing & MTC 3.1/3.2.

Written Quotation

Price, production time and freight terms confirmed in writing for your exact list.

RF vs RTJ at a glance

PointRaised face (RF)Ring type joint (RTJ)
SealSoft or semi-metallic gasket compressed on the raised faceSolid metal ring seated in grooves in both flanges
Typical classesClass 150 to 600, also used higherClass 900, 1500 and 2500, and wellhead or manifold piping
GasketSpiral wound, sheet, kammprofileR oval or octagonal ring; BX and RX on API equipment
Face finishSerrated, usually 125 to 250 µin (3.2 to 6.3 µm) RaSmooth groove walls with a specified finish
Re-useNew gasket at every breakNew ring at every break; groove must be undamaged
AlignmentTolerant of small misalignmentNeeds closer alignment for the ring to seat

How each seal works

On an RF flange the bolt load is concentrated on the raised area, which under ASME B16.5 is 1/16 inch (1.6 mm) high on Class 150 and 300 and 1/4 inch (6.4 mm) on Class 400 and above. The serrations bite into the gasket filler and stop leaks across the face.

On an RTJ flange the ring is solid metal, deliberately softer than the groove. Bolting deforms the ring into the groove and creates a line contact seal. Internal pressure pushes the ring outward against the groove wall, which helps it seal as pressure rises. The flanges do not touch; a gap remains between faces.

Rules of thumb for choosing

  • Choose RF for most refinery, chemical and utility lines up to Class 600 with spiral-wound gaskets.
  • Choose RTJ at Class 900 and above, on wellhead, manifold and high-pressure gas service, and where the line class asks for it.
  • Match ring material to the flange: soft iron or low-carbon steel rings in carbon steel grooves, 316 or alloy rings in stainless and alloy flanges, always softer than the groove.
  • Do not mix RF and RTJ on one joint; both flanges must have the same face.

Specifying an RTJ flange

State the ring number (for example R-24), ring type, and ring and flange material. If the groove needs a hardness check against the ring, say so in the RFQ. RTJ grooves are machined after heat treatment and protected for transit because a damaged groove will not seal.

Material CategoryGrades / Specifications
Stainless Steel RTJ vs Raised Face (RF) Flange — Which to SpecifyASTM/ASME A/SA182: F304, F304L, F316, F316L, F316H, F316Ti, F321, F347; Cast: CF3, CF3M, CF8, CF8M; DIN: 1.4301, 1.4306, 1.4401, 1.4404, 1.4408, 1.4409
Duplex Steel RTJ vs Raised Face (RF) Flange — Which to SpecifyUNS S31803/S32205 — ASTM A182 Gr F51, F52, F53, F54, F55, F57, F59, F60, F61
Super Duplex RTJ vs Raised Face (RF) Flange — Which to SpecifyUNS S32750/S32760 — ASTM A182 Gr F53, F55; Zeron 100
Carbon Steel RTJ vs Raised Face (RF) Flange — Which to SpecifyASTM/ASME A/SA105, A105N, A216-WCB; A350 LF2 (low temp); A694 F52/F56/F60/F65/F70/F80 (high yield); DIN 1.0460, 1.0402, 1.0619
Alloy Steel RTJ vs Raised Face (RF) Flange — Which to SpecifyASTM A182/ASME SA182: F5, F9, F11, F12, F22, F91 (all P-grades for high temp service)
Nickel Alloy RTJ vs Raised Face (RF) Flange — Which to SpecifyInconel 600, 601, 625, 718, 690, X750 (ASTM B564/ASME SB564); Incoloy 800, 800H, 800HT, 825, 925
Hastelloy RTJ vs Raised Face (RF) Flange — Which to SpecifyC276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X (ASTM B564)
Monel RTJ vs Raised Face (RF) Flange — Which to SpecifyMonel 400 (UNS N04400), Monel K500 (UNS N05500) — ASTM B564
Pure Nickel RTJ vs Raised Face (RF) Flange — Which to SpecifyNickel 200, 201, 205, 205LC — ASTM B564/ASME SB564
Copper Nickel RTJ vs Raised Face (RF) Flange — Which to SpecifyCuNi 90/10 (C70600), CuNi 70/30 (C71500), UNS C71640 — ASTM/ASME SB 61/62/151/152
Titanium RTJ vs Raised Face (RF) Flange — Which to SpecifyGr.1, Gr.2, Gr.4, Gr.5, Gr.7 — ASTM B381/ASME SB381; R50250/R50400/R50550/R50700/R52400/R53400/R56400
Aluminium RTJ vs Raised Face (RF) Flange — Which to Specify5052, 6061, 6063, 2017, 7075
Brass RTJ vs Raised Face (RF) Flange — Which to Specify3602, 2604, H59, H62
Special Alloy RTJ vs Raised Face (RF) Flange — Which to SpecifyAlloy 20 (ASTM B462 SB462 — Carpenter 20Cb-3); SMO 254/6Mo (UNS S31254, DIN 1.4547); Al6XN; AISI 4130; AISI 4140; Nimonic 75/80A/90; Gunmetal; Cast Iron
Standard / SpecScope / Application Details
🇺🇸ANSI/ASME B16.5NPS ½" to 24" — the primary standard for most flanges
🇺🇸ASME B16.47 Series A (MSS SP-44)NPS 26" to 60" — large diameter
🇺🇸ASME B16.47 Series B (API 605)NPS 26" to 60" — large diameter (lighter)
🇺🇸ASME B16.36Orifice flanges
🇺🇸ASME B16.48Line blinds & spectacle blinds
🇪🇺DIN 2501 / EN 1092-1European metric standard — PN ratings
🇯🇵JIS B2220Japanese Industrial Standard
🇬🇧BS 4504 / BS 10 Table D/E/F/HBritish Standard
🇺🇸MSS SP-44Large diameter steel pipeline flanges
🇺🇸API 6AWellhead and Christmas tree equipment
🇺🇸API 605Large diameter carbon steel flanges
🇺🇸AWWA C207Water works flanges
🇷🇺GOST 12820 / 12821Russian/CIS standard
🇦🇺AS 2129 / AS 4087 / AS/NZS 4331.1Australian standard
🇰🇷KS B1503Korean standard
🌐ISO 7005-1 / ISO 9624International standard
🇺🇸SAE J518Hydraulic flanged tube fittings
🇨🇳GB StandardChinese national standard
Raised Gasket Area

Raised Face (RF)

Most common. A raised circular ring that concentrates pressure on a smaller area to compress the gasket. Height: 1/16" for Class 150/300; 1/4" for Class 400 and above.

100% Flat Mating Surface

Flat Face (FF)

No raised portion; entire flange face is in the same plane. Used when mating against cast iron or non-metallic flanges to avoid cracking on bolt tightening.

Deep Metallic Ring Groove

Ring Type Joint (RTJ)

Oval or octagonal groove machined into the face; a metal ring gasket seats in the groove. Used in high-pressure, high-temperature critical service (refineries, oil fields).

Interlocking Alignment

Tongue & Groove (T&G)

One flange has a raised ring (tongue); the other a matching groove. Provides excellent alignment and a confined gasket. Used in pumps and valve bonnets.

Recessed Female Mating

Male & Female (M&F)

Similar to T&G but the female face is flat and the male face raised. Used in heat exchangers, pressure vessels, and high-integrity process joints.

Heavy-Duty Contact

Large Male & Female

Same operating principle as the standard Male & Female flange, scaled up with larger step contact surfaces for specialized heavy industrial equipment.

Hydrostatic / Hydro Pressure Test

Each flange pressure tested at 1.5x working pressure per ASME code requirements.

Ultrasonic Testing (UT)

Non-destructive testing to detect internal sub-surface cracks, inclusions and forging defects.

Radiographic Testing (RT / X-Ray)

100% radiography available; mandatory for critical Class 900+ high pressure services.

Positive Material Identification (PMI)

Spectrometer validation to verify alloy chemistry precisely matches the Mill Test Certificate.

Dye Penetrant Test (DPT / LPT)

Detects micro surface cracking and porosity on critical machined seating surfaces.

Magnetic Particle Inspection (MPI)

For ferromagnetic alloys; flags surface and near-surface structural discontinuities.

Hardness Test (Brinell/Rockwell)

Verifies correct heat treatment structure and ensures mechanical properties are hit.

Direct-Reading Spectrograph

In-house lab chemical checks of billets before forging process begins.

Impact / Charpy Test

Crucial for low-temperature applications to verify ductility (e.g. A350 LF2, LTCS).

NACE Compliance Testing

Verifies sour-gas / H2S environment service capability (NACE MR0175 / MR0103).

Mill Test Certificate (MTC)

Provided as per EN 10204 3.1 detailing chemical & mechanical analysis.

EN 10204 3.2 Certificate

Independent third-party inspection validation (available upon request).

NACE MR0175 / MR0103 Compliance

Certified suitability for sour gas/H2S environments.

Raw Materials Certificate

Provides 100% trace origin tracking from steel billet to finished flange.

Dimensional Inspection Report

All critical tolerances checked and certified against CAD designs.

Heat Treatment Certificate

HTR and PWHT thermal chart records included where requested.

Hydrostatic Test Certificate

Pressure log documentation verifying weld integrity.

Third Party Inspection (TPI)

Bureau Veritas, SGS, Lloyds, DNV, TUV inspection options.

Packing List & Weight Certificate

Proper documentation for simple custom clearance and cargo log.

Country of Origin Certificate

Enables import tariff relief and compliance logging.

🔒 Certified Compliance Guaranteed

Frequently Asked Questions

Q: Can an RTJ flange be converted to raised face?

Not by simple machining in the field. The groove would need to be filled or the face remachined to a different profile, which changes the flange. A new flange with the correct face is normally ordered.

Q: Is RTJ always better at high pressure?

RTJ is the usual choice at Class 900 and above, but many Class 900 and 1500 lines use RF with spiral-wound gaskets. The piping specification decides.

Q: Why must an RTJ ring be softer than the flange groove?

So the ring deforms into the groove and seals without damaging it. If the ring is harder, the groove can be indented and the flange may not seal again.

Q: Does an RTJ flange need a different gasket every time?

Yes. Rings are deformed when seated and are replaced each time the joint is broken.

Why Choose Remax Forge?

Remax Forge & Fittings stands out as a leading flange manufacturer due to our complete in-house forging, heat treatment, and precision CNC machining capabilities based in Mumbai. We provide certified compliance, factory-direct wholesale pricing, and custom forging schedules tailored to your engineering blueprints. With over 20 years of manufacturing experience, zero-defect quality management, and short lead times, we are a trusted supply partner for critical industrial piping projects.

ISO 9001:2015 Certified

Fully audited quality management workflows.

In-House Forging

Forging, heat-treat, machining in Mumbai.

Testing Laboratory

PMI, Spectro, UT, Hydro labs on-site.

Mill Certificates

EN 10204 3.1 standard; 3.2 available.

20+ Years Experience

Serving critical gas/oil clients globally.

45+ Export Countries

Proven global logistics and documentation.

Custom Forging

Special shapes, alloys and schedules.

Factory-Direct Price

Competitive pricing with no agent markup.

Technical Support

Engineers ready to assist spec selection.

Short Lead Times

Fast turnaround of custom and stock orders.

Global Export Network

AmericasUSA (Texas, Houston, Louisiana), Canada, Brazil, Colombia, Mexico
Middle EastUAE (Dubai, Abu Dhabi), Saudi Arabia, Qatar, Kuwait, Oman, Bahrain, Iraq, Iran
AfricaNigeria (Lagos, Port Harcourt), Ghana, South Africa, Egypt, Kenya, Libya
EuropeGermany, Italy, Netherlands, Norway (Stavanger), Spain, France, UK
Asia-PacificSingapore, Malaysia, Indonesia, Vietnam, Australia, South Korea, Japan
Central AsiaKazakhstan, Azerbaijan, Turkmenistan
🌍 Trusted logistics across 6 continents
Procurement Process

How to Order

Ordering high-quality forged flanges from Remax is straightforward. To ensure our engineering team provides you with a precise and competitive quote, please specify the exact flange type, nominal pipe size (NPS), pressure class rating, material grade, and facing configuration. Let us know your total quantity requirements and if you require any specialized testing or custom coatings. Contact us via email or phone.

1Flange Type (e.g. Weld Neck, Slip On, Blind, etc.)
2Size — NPS (Nominal Pipe Size) in inches (e.g. 2", 4", 10")
3Pressure Class (e.g. 150#, 300#, 600#, 900#, 1500#, 2500#)
4Material Grade (e.g. ASTM A105, A182 F316L, A182 F51)
5Facing Type (RF / FF / RTJ / T&G / M&F)
6Quantity required
7Standard / Specification (ASME B16.5, DIN, JIS, etc.)
8Any special requirements (NACE, low-temp, PMI, 3rd party inspection, surface coating)

Direct Inquiries

Estimated Lead Times

Standard sizes & specs:7–14 days
Special alloys / customs:3–6 weeks

Ready to Quote Your Custom Flange Project?

Send us your drawing, specifications, or inquiry details. Our technical engineering team will review your specs and provide a firm written quotation with price, production time and EN 10204 3.1 certification.