Flange Manufacturer & Supplier for Korba
Flanges, butt-weld and forged fittings for Korba's power & boiler, steel & metals and cement & mining units, made at our ISO 9001:2015 works in Mumbai, dispatched from stock in 24–48 h and delivered in about 4 days, with EN 10204 3.1 certificates.
Power & Boilers
Superheated steam lines, IBR boiler circuits & exhaust pipes: Alloy Steel P91/F22 Flanges, IBR Fittings.
~4-day delivery via NH130 via Raipur
Ex-stock dispatch from Mumbai in 24–48 h, then road freight to Korba.
EN 10204 3.1 MTC
Heat numbers marked on every piece; third-party inspection accepted.
Grades: A105, F11/F22/F91 (IBR)
Carbon, alloy, stainless and duplex grades held in stock.
Piping & Forged Fittings Solutions for Korba
Around Korba industrial belt, procurement runs on NTPC Korba & CSPGCL thermal stations, BALCO aluminium smelter, SECL mines. We serve this demand from Mumbai with weld neck flanges, butt weld tees and concentric reducers in A105, F11/F22/F91 (IBR), built to ASME B16.5/B16.11 and documented with EN 10204 3.1 certificates.
ISO 9001:2015 Certified Quality & Material Testing
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Korba, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Flange Supply for Korba's Power, Steel and Mining Units
Korba's demand for flanges and fittings comes mainly from NTPC Korba & CSPGCL thermal stations, BALCO aluminium smelter, SECL mines. Power stations and boiler houses buy A105 and alloy F11/F22/F91 weld neck flanges and fittings for steam, feedwater and blow-down lines, with IBR documents where the line falls under the Indian Boiler Regulations. Metal-producing units use large-bore slip-on and plate flanges on cooling-water and gas mains, alloy flanges on hot utility lines and abrasion-resistant plate in handling areas. Cement, mining and mineral units order thick carbon steel flanges, blind flanges and wear-resistant plate for slurry, conveying and dust-collection lines.
Orders for Korba leave our Mumbai stock within 24–48 hours and travel by road on NH130 via Raipur, so material is usually on site in about 4 days. Custom forgings and non-stock sizes take 7–15 working days. To quote quickly we need the size (NPS or DN), pressure class, facing (RF, FF or RTJ), material grade and the schedule of the mating pipe.
Every lot ships with an EN 10204 3.1 mill test certificate, and heat numbers are marked on each piece so they can be traced back to it. Alloy and stainless items can be PMI-checked before dispatch, and inspection by your own or a third-party agency is welcome at our works. Steam-line items for boiler work can be supplied with IBR documents. We use the same route to serve Raipur, Bhilai, Bilaspur and Durg, so mixed orders for plants in the region can be planned together.
Industrial areas we deliver to
- Korba industrial belt
- Raipur: nearby city on the same dispatch route
- Bhilai: nearby city on the same dispatch route
- Bilaspur: nearby city on the same dispatch route
- Durg: nearby city on the same dispatch route
Typical specifications by service in Korba
| Service | Flanges & fittings usually specified |
|---|---|
| Main steam & feedwater | A182 F11 / F22 / F91 weld neck flanges, Class 600–2500, IBR where applicable |
| Cooling water & gas mains | A105 slip-on and plate flanges, large bore to ASME B16.47 |
| Slurry & conveying lines | Thick-wall carbon steel flanges and long-radius elbows |
| Auxiliary steam & drains | A105 flanges with 3000# / 6000# socket-weld fittings |
| Abrasive & slag handling | Wear-resistant plate (Hardox-type) and heavy-wall fittings |
| Chutes, liners & hoppers | Wear-resistant plate (Hardox-type), cut to size |
Flanges & Forged Fittings We Supply
Industrial Flanges
Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in A105, F11/F22/F91 (IBR), Class 150–2500, for power & boiler piping in Korba.
Buttweld Fittings
ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for steel & metals lines in Korba.
Socket Weld Fittings
ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at cement & mining units in Korba.
Why Buyers Choose Remax Forge & Fittings
ISO 9001:2015 Certified
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC Machining & Custom Parts
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
Global Export Footprint
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Technical Consultancy
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Industries We Empower
Precision-engineered components for mission-critical environments.
Power & Boilers
Superheated steam lines, IBR boiler circuits & exhaust pipes
Alloy Steel P91/F22 Flanges, IBR Fittings
Steel & Metals
Blast furnace utilities, slag lines & abrasion zones
A105 Forged Flanges, Hardox Wear Liners
Cement & Mining
Abrasive material handling & excavation slurry loops
Hardox Wear Plates, High-Thickness Flanges
Getting it to Korba
Shipping & Transit Details
Transit Summary
Route: NH130 via Raipur. Ex-stock dispatch 24–48 h from Mumbai; road freight ≈ 4 days to Korba. Custom forgings: 7–15 working days. Packing: seaworthy crates/pallets with rust-preventive coating. Docs: invoice, packing list, 3.1 MTC, test reports, IBR documentation where applicable.
Seaworthy Packing
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Documents Pack
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.
Our Clients
FAQs
We deliver Weld Neck Flanges, Butt Weld Tees, Concentric Reducers and Boiler Quality Plates to Korba in A105, F11/F22/F91 (IBR), dimensioned to ASME B16.5, B16.47 and B16.11. Demand here comes mainly from power & boilers and steel & metals — including units around Korba industrial belt — and every lot ships with EN 10204 3.1 certification.
Yes. For steam service around NTPC Korba & CSPGCL thermal stations we supply A105, F11, F22 and F91 flanges, butt-weld tees and reducers with IBR documentation documentation, plus 3.1 MTCs and hydro test reports, so boiler inspectorate approvals in Chhattisgarh proceed without paperwork gaps.
Honestly: ex-stock items dispatch from our Mumbai warehouse within 24–48 hours and reach Korba in roughly 4 days by road (NH130 via Raipur). Custom forgings add 7–15 working days of production. We confirm a dated schedule with every quotation rather than promising blanket next-day delivery.
We deliver door-to-site across Korba, including Korba industrial belt, and to nearby Raipur, Bhilai, Bilaspur and Durg. Goods leave our Mumbai stock within 24–48 hours and travel by road on NH130 via Raipur, normally arriving in about 4 days.
No — and we say so plainly. Manufacturing, stock and testing are at our ISO 9001:2015 facility in Mumbai; Korba is served through scheduled road dispatches with full documentation. Buyers are welcome to audit the Mumbai works in person or by video inspection before ordering.
Every Korba dispatch includes EN 10204 3.1 mill test certificates, dimensional reports and hydro/NDT test reports as ordered, IBR documentation for steam-service items. 100% PMI is standard on alloy and stainless lots.
We keep MOQs low for the Korba corridor — small lots are clubbed with our scheduled dispatches on this route, so a single-item trial order is workable. Project-quantity rates apply from roughly 100 pieces or 500 kg per grade.
Get Written Quote in 30 Minutes
Direct factory pricing. No public phone calls needed.