Flange Manufacturer & Supplier for Kota
Flanges, butt-weld and forged fittings for Kota's fertilizer, power & boiler and chemical units, made at our ISO 9001:2015 works in Mumbai, dispatched from stock in 24–48 h and delivered in about 3 days, with EN 10204 3.1 certificates.
Fertilizers
Corrosive chemical transfer & high-pressure piping networks: Super Duplex Flanges, Custom Forged Tees.
~3-day delivery via NH52 via Indore
Ex-stock dispatch from Mumbai in 24–48 h, then road freight to Kota.
EN 10204 3.1 MTC
Heat numbers marked on every piece; third-party inspection accepted.
Grades: SS 316L, Alloy 20, Duplex
Carbon, alloy, stainless and duplex grades held in stock.
Piping & Forged Fittings Solutions for Kota
Around Indraprastha industrial area, Gadepan, procurement runs on Chambal Fertilisers (Gadepan), DCM Shriram, Kota thermal, instrumentation legacy. We serve this demand from Mumbai with weld neck flanges, spectacle blind flanges and butt weld tees in SS 316L, Alloy 20, Duplex, built to ASME B16.5/B16.11 and documented with EN 10204 3.1 certificates.
ISO 9001:2015 Certified Quality & Material Testing
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Kota, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Flange Supply for Kota's Fertilizer, Power and Chemical Units
Kota's demand for flanges and fittings comes mainly from Chambal Fertilisers (Gadepan), DCM Shriram, Kota thermal, instrumentation legacy. Fertilizer complexes order A350 LF2 flanges for ammonia, SS 316L (urea grade where specified) for urea and carbamate lines, and duplex for cooling water. Boiler and steam-plant demand centres on Class 300–1500 weld neck flanges, A234 WPB/WP11/WP22 fittings and IBR-certified forgings for steam headers. Chemical and process plants buy SS 316L and 304L flanges and butt-weld fittings for corrosive lines, moving to duplex 2205 or super duplex where chlorides are present.
Orders for Kota leave our Mumbai stock within 24–48 hours and travel by road on NH52 via Indore, so material is usually on site in about 3 days. Custom forgings and non-stock sizes take 7–15 working days. To quote quickly we need the size (NPS or DN), pressure class, facing (RF, FF or RTJ), material grade and the schedule of the mating pipe.
Every lot ships with an EN 10204 3.1 mill test certificate, and heat numbers are marked on each piece so they can be traced back to it. Alloy and stainless items can be PMI-checked before dispatch, and inspection by your own or a third-party agency is welcome at our works. Steam-line items for boiler work can be supplied with IBR documents. We use the same route to serve Bikaner, Ajmer, Jodhpur and Jaipur, so mixed orders for plants in the region can be planned together.
Industrial areas we deliver to
- Indraprastha industrial area
- Gadepan
- Bikaner: nearby city on the same dispatch route
- Ajmer: nearby city on the same dispatch route
- Jodhpur: nearby city on the same dispatch route
- Jaipur: nearby city on the same dispatch route
Typical specifications by service in Kota
| Service | Flanges & fittings usually specified |
|---|---|
| Ammonia service | A350 LF2 weld neck flanges and A420 WPL6 fittings |
| Main steam & feedwater | A182 F11 / F22 / F91 weld neck flanges, Class 600–2500, IBR where applicable |
| Corrosive process lines | SS 316L / 304L weld neck and slip-on flanges; B16.9 fittings in Sch 10S–80S |
| Urea & carbamate lines | SS 316L (urea grade where specified) or super duplex F53 |
| Auxiliary steam & drains | A105 flanges with 3000# / 6000# socket-weld fittings |
| Chloride-bearing service | Duplex F51 / super duplex F53 flanges and fittings |
Flanges & Forged Fittings We Supply
Industrial Flanges
Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in SS 316L, Alloy 20, Duplex, Class 150–2500, for fertilizer piping in Kota.
Buttweld Fittings
ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for power & boiler lines in Kota.
Socket Weld Fittings
ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at chemical units in Kota.
Why Buyers Choose Remax Forge & Fittings
ISO 9001:2015 Certified
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC Machining & Custom Parts
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
Global Export Footprint
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Technical Consultancy
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Industries We Empower
Precision-engineered components for mission-critical environments.
Fertilizers
Corrosive chemical transfer & high-pressure piping networks
Super Duplex Flanges, Custom Forged Tees
Power & Boilers
Superheated steam lines, IBR boiler circuits & exhaust pipes
Alloy Steel P91/F22 Flanges, IBR Fittings
Petrochemical & Chemical
Highly corrosive acid loops & polymer synthesis lines
Stainless Steel 316L Flanges, Custom Forged Fittings
Getting it to Kota
Shipping & Transit Details
Transit Summary
Route: NH52 via Indore. Ex-stock dispatch 24–48 h from Mumbai; road freight ≈ 3 days to Kota. Custom forgings: 7–15 working days. Packing: seaworthy crates/pallets with rust-preventive coating. Docs: invoice, packing list, 3.1 MTC, test reports, IBR documentation where applicable.
Seaworthy Packing
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Documents Pack
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.
Our Clients
FAQs
We deliver Weld Neck Flanges, Spectacle Blind Flanges, Butt Weld Tees and Slip On Flanges to Kota in SS 316L, Alloy 20, Duplex, dimensioned to ASME B16.5, B16.47 and B16.11. Demand here comes mainly from fertilizers and power & boilers — including units around Indraprastha industrial area — and every lot ships with EN 10204 3.1 certification.
Fertilizer plants such as Chambal Fertilisers (Gadepan) typically specify SS 316L, Alloy 20 or Duplex for corrosive ammonia and urea circuits. We supply weld necks, spectacle blinds and butt-weld tees in these grades with 100% PMI verification and EN 10204 3.1 MTCs.
Honestly: ex-stock items dispatch from our Mumbai warehouse within 24–48 hours and reach Kota in roughly 3 days by road (NH52 via Indore). Custom forgings add 7–15 working days of production. We confirm a dated schedule with every quotation rather than promising blanket next-day delivery.
We deliver door-to-site across Kota, including Indraprastha industrial area and Gadepan, and to nearby Bikaner, Ajmer, Jodhpur and Jaipur. Goods leave our Mumbai stock within 24–48 hours and travel by road on NH52 via Indore, normally arriving in about 3 days.
No — and we say so plainly. Manufacturing, stock and testing are at our ISO 9001:2015 facility in Mumbai; Kota is served through scheduled road dispatches with full documentation. Buyers are welcome to audit the Mumbai works in person or by video inspection before ordering.
Every Kota dispatch includes EN 10204 3.1 mill test certificates, dimensional reports and hydro/NDT test reports as ordered, IBR documentation for steam-service items. 100% PMI is standard on alloy and stainless lots.
We keep MOQs low for the Kota corridor — small lots are clubbed with our scheduled dispatches on this route, so a single-item trial order is workable. Project-quantity rates apply from roughly 100 pieces or 500 kg per grade.