Flanges, butt-weld and forged fittings for Mangaluru's refinery, chemical and fertilizer units, made at our ISO 9001:2015 works in Mumbai, dispatched from stock in 24–48 h and delivered in about 2 days, with EN 10204 3.1 certificates.
Hydrocarbon processing, thermal cracking & high-temp lines: Alloy Steel Flanges, RTJ Joints, High-Pressure Fittings.
Ex-stock dispatch from Mumbai in 24–48 h, then road freight to Mangaluru.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades held in stock.

Supplying Mangaluru means understanding MRPL refinery, Mangalore Chemicals & Fertilizers, New Mangalore Port, petrochem. Remax Forge ships weld neck flanges, spectacle blind flanges and butt weld elbows from Mumbai into Baikampady industrial area, MSEZ — A105, F11/F22, SS 316L, Duplex 2205, ASME B16.5/B16.11 dimensions, EN 10204 3.1 MTC on every lot.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Mangaluru, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Mangaluru's demand for flanges and fittings comes mainly from MRPL refinery, Mangalore Chemicals & Fertilizers, New Mangalore Port, petrochem. For refinery work the usual order is weld neck RF flanges in A105 with a 125–250 AARH gasket finish, alloy F11/F22 or F5 items for hot sections and RTJ flanges on high-pressure lines. Chemical and process plants buy SS 316L and 304L flanges and butt-weld fittings for corrosive lines, moving to duplex 2205 or super duplex where chlorides are present. Ammonia-urea plants need low-temperature LF2 forgings, stainless and super duplex flanges and forged tees for high-pressure synthesis loops.
Stock items for Mangaluru are dispatched from Mumbai in 24–48 hours and reach site by road in about 2 days (NH66 via Goa (~890 km)). Non-stock sizes and custom forgings run 7–15 working days. Send your size, class, facing, grade and pipe schedule, or simply the BOQ or line list, and we will quote line by line.
Every lot ships with an EN 10204 3.1 mill test certificate, and heat numbers are marked on each piece so they can be traced back to it. Alloy and stainless items can be PMI-checked before dispatch, and inspection by your own or a third-party agency is welcome at our works. We use the same route to serve Bengaluru, Mysuru, Hubballi Dharwad and Belagavi, so mixed orders for plants in the region can be planned together.
| Service | Flanges & fittings usually specified |
|---|---|
| Hydrocarbon process lines | A105 / A350 LF2 weld neck RF flanges, Class 150–600; RTJ for Class 900 and above |
| Corrosive process lines | SS 316L / 304L weld neck and slip-on flanges; B16.9 fittings in Sch 10S–80S |
| Ammonia service | A350 LF2 weld neck flanges and A420 WPL6 fittings |
| Heater & hot-oil piping | A182 F11 / F22 / F5 flanges with A234 WP11 / WP22 fittings |
| Chloride-bearing service | Duplex F51 / super duplex F53 flanges and fittings |
| Urea & carbamate lines | SS 316L (urea grade where specified) or super duplex F53 |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in A105, F11/F22, SS 316L, Duplex 2205, Class 150–2500, for refinery piping in Mangaluru.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for chemical lines in Mangaluru.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at fertilizer units in Mangaluru.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Hydrocarbon processing, thermal cracking & high-temp lines
Alloy Steel Flanges, RTJ Joints, High-Pressure Fittings

Highly corrosive acid loops & polymer synthesis lines
Stainless Steel 316L Flanges, Custom Forged Fittings

Corrosive chemical transfer & high-pressure piping networks
Super Duplex Flanges, Custom Forged Tees
Route: NH66 via Goa (~890 km). Ex-stock dispatch 24–48 h from Mumbai; road freight ≈ 2 days to Mangaluru. Custom forgings: 7–15 working days. Packing: seaworthy crates/pallets with rust-preventive coating. Docs: invoice, packing list, 3.1 MTC, test reports.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































We deliver Weld Neck Flanges, Spectacle Blind Flanges, Butt Weld Elbows and Lap Joint Flanges to Mangaluru in A105, F11/F22, SS 316L, Duplex 2205, dimensioned to ASME B16.5, B16.47 and B16.11. Demand here comes mainly from oil & gas (refining) and fertilizers — including units around Baikampady industrial area — and every lot ships with EN 10204 3.1 certification.
Yes. For refinery and hydrocarbon service near MRPL refinery we supply weld neck and RTJ-faced flanges plus spectacle blinds in A105, F11/F22, SS 316L and Duplex 2205, compliant with NACE MR0175 where specified. Third-party (3.2) inspection can be arranged on request.
Honestly: ex-stock items dispatch from our Mumbai warehouse within 24–48 hours and reach Mangaluru in roughly 2 days by road (NH66 via Goa (~890 km)). Custom forgings add 7–15 working days of production. We confirm a dated schedule with every quotation rather than promising blanket next-day delivery.
We deliver door-to-site across Mangaluru, including Baikampady industrial area and MSEZ, and to nearby Bengaluru, Mysuru, Hubballi Dharwad and Belagavi. Goods leave our Mumbai stock within 24–48 hours and travel by road on NH66 via Goa (~890 km), normally arriving in about 2 days.
No — and we say so plainly. Manufacturing, stock and testing are at our ISO 9001:2015 facility in Mumbai; Mangaluru is served through scheduled road dispatches with full documentation. Buyers are welcome to audit the Mumbai works in person or by video inspection before ordering.
Every Mangaluru dispatch includes EN 10204 3.1 mill test certificates, dimensional reports and hydro/NDT test reports as ordered, NACE MR0175 compliance and 3.2 third-party inspection on request. 100% PMI is standard on alloy and stainless lots.
We keep MOQs low for the Mangaluru corridor — small lots are clubbed with our scheduled dispatches on this route, so a single-item trial order is workable. Project-quantity rates apply from roughly 100 pieces or 500 kg per grade.
Direct factory pricing. No public phone calls needed.