Material Grade Specification

Hastelloy C-276 Flanges — ASTM B564 UNS N10276

Hastelloy C-276 flange manufacturer, Mumbai. UNS N10276 Ni-Mo-Cr alloy for wet chlorine, ferric/cupric chlorides, severe chemical service. Get a written quote.

Material Specification & Overview

Hastelloy C-276 (UNS N10276) is a premier nickel-molybdenum-chromium-tungsten alloy designed for maximum corrosion resistance in severe reducing and oxidizing chemical environments, including wet chlorine gas and ferric/cupric chlorides.

UNS DesignationN10276
Governing StandardASTM B564 / ASME SB-564 UNS N10276

Chemical Composition (wt %)

Governing specification limits per ASTM / ASME standards. Actual values provided on EN 10204 3.1 MTC.

ElementSpecification Limit / Composition
Nickel (Ni)~57.0% balance
Molybdenum (Mo)15.0 - 17.0%
Chromium (Cr)14.5 - 16.5%
Tungsten (W)3.0 - 4.5%

Mechanical Properties

PropertySpecification Limit
Yield Strength283 MPa (41 ksi) min
Tensile Strength690 MPa (100 ksi) min
Service Temp RangeCryogenic to 1,090°C

Pressure-Temperature Rating Reference

Service TempClass 150Class 300Class 600Class 900
Ambient (-29 to 38°C)290 psi750 psi1500 psi2250 psi

Primary Industry Applications

Flue gas desulfurization (FGD) scrubbers
Chemical reactors handling hot contaminated mineral acids
Sour gas wells containing high H2S and elemental sulfur
Pulp & paper chlorine dioxide bleaching vessels

What makes C-276 different

Alloy C-276 (UNS N10276) is a nickel-molybdenum-chromium alloy with tungsten, with about 16% each of molybdenum and chromium. Its carbon and silicon are kept very low so that grain-boundary precipitates do not form in the weld heat-affected zone. In most chemical services it can therefore be used in the as-welded condition without a further solution anneal.

The combination of molybdenum and chromium covers both reducing and oxidising media, which is why it is used where process chemistry changes or is not fully known.

Typical C-276 flange duties

  • Wet chlorine, hypochlorite and chlorine dioxide in pulp bleaching and chlor-alkali plants.
  • Flue gas desulphurisation absorbers, outlet ducts and reheaters.
  • Hydrochloric and sulphuric acid service within concentration and temperature limits.
  • Pharmaceutical and fine chemical reactors where several acids are handled in one vessel.

Ordering C-276 flanges

Order to ASTM B564 / ASME SB-564 UNS N10276, solution annealed. State the flange type and class, the face finish for your gasket, and whether corrosion testing such as ASTM G28 is required. PMI testing confirms nickel, molybdenum and chromium levels before dispatch.

Forging, Heat Treatment & Quality Inspection Protocols

Forging & Thermal Processing

Flanges in Hastelloy C-276 Flanges are manufactured via precision closed-die or open-die forging to establish continuous metallurgical grain flow along the flange hub and neck contour. Raw billets are heated in calibrated gas-fired furnaces under strictly controlled soak temperatures to eliminate microstructural defects.

Depending on the alloy grade, components undergo certified thermal conditioning: normalizing for carbon steels (A105N, A350 LF2), rapid water quench solution annealing at 1040°C–1120°C for stainless and duplex grades, or controlled aging for nickel superalloys. This ensures exceptional notch toughness, yield strength, and resistance to stress corrosion cracking.

Dimensional Tolerances & Certification

Final machining is executed on heavy-duty CNC turning centers to guarantee precise raised face, flat face, or ring type joint (RTJ) dimensions compliant with ASME B16.5, ASME B16.47, DIN, or EN 1092-1 standards. Gasket contact surfaces receive spiral or concentric serrations strictly controlled between 125 and 250 µin Ra.

Every production heat is issued with an EN 10204 Type 3.1 inspection certificate containing full heat chemistry, mechanical tensile test data, and Charpy impact values. Independent Third-Party Inspection (TPI) by Lloyd's, BV, DNV-GL, TÜV, and SGS is readily accommodated for global EPC and refinery contracts.

Related Products & Industry Guides

Frequently Asked Procurement Questions

Q: Can Hastelloy C-276 resist wet chlorine gas?

A: Yes. Hastelloy C-276 is one of the few metallic alloys capable of resisting wet chlorine gas, hypochlorite, and chlorine dioxide solutions.

Q: Is Hastelloy C-276 the same as Alloy C-276?

A: Hastelloy is a trade name. The flange is specified and certified as UNS N10276 to ASTM B564 / ASME SB-564.

Q: When would C-276 be chosen over 316L?

A: When chlorides, acids or temperature are beyond 316L or duplex, for example hot hydrochloric acid traces or wet chlorine. It costs much more, so it is used only where needed.

Q: Does C-276 suit oxidising acids such as hot nitric acid?

A: Strongly oxidising acids are not its strength. Other alloys are usually better there, so send the process chemistry for a material review.

Direct Factory Pricing

Get a Quote for Hastelloy C-276 Flanges

Written commercial offer with Mill Test Certificate guarantee.