Forged blind flanges in Duplex 2205 / Super Duplex 2507. Full chemical & mechanical traceability per EN 10204 3.1. PMI-verified alloy chemistry. Mumbai manufacturer, export-ready. Quote in 30 min.
Remax Forge & Fittings is an ISO 9001:2015 certified manufacturer of forged flanges based in Mumbai, India. We deliver custom-engineered, fully-traceable forged piping components designed to meet strict industrial specifications for duplex 2205 blind flange manufacturer across global infrastructure, chemical processing, oil & gas, and power generation projects.
Every flange stamped with heat number, pressure rating, grade & size.
Spectro PMI analysis, ultrasonic testing, hydrostatic testing & MTC 3.1/3.2.
Quotes provided within 30 minutes; standard orders dispatched in 7–14 days.
Key technical parameters required when specifying or ordering for this application:
Why Duplex 2205 / Super Duplex 2507 is specified — corrosion/temperature/pressure driver.
PMI spectrometer verification process (already used as a trust signal on slip-on-flange page — replicate).
Dimensional range in this material.
Cross-link to the base Blind Flange page and the material grade page (verify no overlap with existing Content Build Pack material pages first).
Quote-form CTA.
| Material Category | Grades / Specifications |
|---|---|
| Stainless Steel Duplex 2205 Blind Flange Manufacturer | ASTM/ASME A/SA182: F304, F304L, F316, F316L, F316H, F316Ti, F321, F347; Cast: CF3, CF3M, CF8, CF8M; DIN: 1.4301, 1.4306, 1.4401, 1.4404, 1.4408, 1.4409 |
| Duplex Steel Duplex 2205 Blind Flange Manufacturer | UNS S31803/S32205 — ASTM A182 Gr F51, F52, F53, F54, F55, F57, F59, F60, F61 |
| Super Duplex Duplex 2205 Blind Flange Manufacturer | UNS S32750/S32760 — ASTM A182 Gr F53, F55; Zeron 100 |
| Carbon Steel Duplex 2205 Blind Flange Manufacturer | ASTM/ASME A/SA105, A105N, A216-WCB; A350 LF2 (low temp); A694 F52/F56/F60/F65/F70/F80 (high yield); DIN 1.0460, 1.0402, 1.0619 |
| Alloy Steel Duplex 2205 Blind Flange Manufacturer | ASTM A182/ASME SA182: F5, F9, F11, F12, F22, F91 (all P-grades for high temp service) |
| Nickel Alloy Duplex 2205 Blind Flange Manufacturer | Inconel 600, 601, 625, 718, 690, X750 (ASTM B564/ASME SB564); Incoloy 800, 800H, 800HT, 825, 925 |
| Hastelloy Duplex 2205 Blind Flange Manufacturer | C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X (ASTM B564) |
| Monel Duplex 2205 Blind Flange Manufacturer | Monel 400 (UNS N04400), Monel K500 (UNS N05500) — ASTM B564 |
| Pure Nickel Duplex 2205 Blind Flange Manufacturer | Nickel 200, 201, 205, 205LC — ASTM B564/ASME SB564 |
| Copper Nickel Duplex 2205 Blind Flange Manufacturer | CuNi 90/10 (C70600), CuNi 70/30 (C71500), UNS C71640 — ASTM/ASME SB 61/62/151/152 |
| Titanium Duplex 2205 Blind Flange Manufacturer | Gr.1, Gr.2, Gr.4, Gr.5, Gr.7 — ASTM B381/ASME SB381; R50250/R50400/R50550/R50700/R52400/R53400/R56400 |
| Aluminium Duplex 2205 Blind Flange Manufacturer | 5052, 6061, 6063, 2017, 7075 |
| Brass Duplex 2205 Blind Flange Manufacturer | 3602, 2604, H59, H62 |
| Special Alloy Duplex 2205 Blind Flange Manufacturer | Alloy 20 (ASTM B462 SB462 — Carpenter 20Cb-3); SMO 254/6Mo (UNS S31254, DIN 1.4547); Al6XN; AISI 4130; AISI 4140; Nimonic 75/80A/90; Gunmetal; Cast Iron |
| Standard / Spec | Scope / Application Details |
|---|---|
| 🇺🇸ANSI/ASME B16.5 | NPS ½" to 24" — the primary standard for most flanges |
| 🇺🇸ASME B16.47 Series A (MSS SP-44) | NPS 26" to 60" — large diameter |
| 🇺🇸ASME B16.47 Series B (API 605) | NPS 26" to 60" — large diameter (lighter) |
| 🇺🇸ASME B16.36 | Orifice flanges |
| 🇺🇸ASME B16.48 | Line blinds & spectacle blinds |
| 🇪🇺DIN 2501 / EN 1092-1 | European metric standard — PN ratings |
| 🇯🇵JIS B2220 | Japanese Industrial Standard |
| 🇬🇧BS 4504 / BS 10 Table D/E/F/H | British Standard |
| 🇺🇸MSS SP-44 | Large diameter steel pipeline flanges |
| 🇺🇸API 6A | Wellhead and Christmas tree equipment |
| 🇺🇸API 605 | Large diameter carbon steel flanges |
| 🇺🇸AWWA C207 | Water works flanges |
| 🇷🇺GOST 12820 / 12821 | Russian/CIS standard |
| 🇦🇺AS 2129 / AS 4087 / AS/NZS 4331.1 | Australian standard |
| 🇰🇷KS B1503 | Korean standard |
| 🌐ISO 7005-1 / ISO 9624 | International standard |
| 🇺🇸SAE J518 | Hydraulic flanged tube fittings |
| 🇨🇳GB Standard | Chinese national standard |
Most common. A raised circular ring that concentrates pressure on a smaller area to compress the gasket. Height: 1/16" for Class 150/300; 1/4" for Class 400 and above.
No raised portion; entire flange face is in the same plane. Used when mating against cast iron or non-metallic flanges to avoid cracking on bolt tightening.
Oval or octagonal groove machined into the face; a metal ring gasket seats in the groove. Used in high-pressure, high-temperature critical service (refineries, oil fields).
One flange has a raised ring (tongue); the other a matching groove. Provides excellent alignment and a confined gasket. Used in pumps and valve bonnets.
Similar to T&G but the female face is flat and the male face raised. Used in heat exchangers, pressure vessels, and high-integrity process joints.
Same operating principle as the standard Male & Female flange, scaled up with larger step contact surfaces for specialized heavy industrial equipment.
Each flange pressure tested at 1.5x working pressure per ASME code requirements.
Non-destructive testing to detect internal sub-surface cracks, inclusions and forging defects.
100% radiography available; mandatory for critical Class 900+ high pressure services.
Spectrometer validation to verify alloy chemistry precisely matches the Mill Test Certificate.
Detects micro surface cracking and porosity on critical machined seating surfaces.
For ferromagnetic alloys; flags surface and near-surface structural discontinuities.
Verifies correct heat treatment structure and ensures mechanical properties are hit.
In-house lab chemical checks of billets before forging process begins.
Crucial for low-temperature applications to verify ductility (e.g. A350 LF2, LTCS).
Verifies sour-gas / H2S environment service capability (NACE MR0175 / MR0103).
Provided as per EN 10204 3.1 detailing chemical & mechanical analysis.
Independent third-party inspection validation (available upon request).
Certified suitability for sour gas/H2S environments.
Provides 100% trace origin tracking from steel billet to finished flange.
All critical tolerances checked and certified against CAD designs.
HTR and PWHT thermal chart records included where requested.
Pressure log documentation verifying weld integrity.
Bureau Veritas, SGS, Lloyds, DNV, TUV inspection options.
Proper documentation for simple custom clearance and cargo log.
Enables import tariff relief and compliance logging.
How do you verify Duplex 2205 chemistry matches the mill certificate? Remax Forge manufactures and supplies fully certified ASME B16.5 and ASME B16.47 forged flanges with EN 10204 3.1 MTC, PMI testing, and third-party inspection.
What's the lead time difference vs carbon steel? Remax Forge manufactures and supplies fully certified ASME B16.5 and ASME B16.47 forged flanges with EN 10204 3.1 MTC, PMI testing, and third-party inspection.
Do you stock Duplex 2205 blind flanges or forge to order? Remax Forge manufactures and supplies fully certified ASME B16.5 and ASME B16.47 forged flanges with EN 10204 3.1 MTC, PMI testing, and third-party inspection.
Remax Forge & Fittings stands out as a leading flange manufacturer due to our complete in-house forging, heat treatment, and precision CNC machining capabilities based in Mumbai. We provide certified compliance, factory-direct wholesale pricing, and custom forging schedules tailored to your engineering blueprints. With over 20 years of manufacturing experience, zero-defect quality management, and short lead times, we are a trusted supply partner for critical industrial piping projects.
Fully audited quality management workflows.
Forging, heat-treat, machining in Mumbai.
PMI, Spectro, UT, Hydro labs on-site.
EN 10204 3.1 standard; 3.2 available.
Serving critical gas/oil clients globally.
Proven global logistics and documentation.
Special shapes, alloys and schedules.
Competitive pricing with no agent markup.
Engineers ready to assist spec selection.
Fast turnaround of custom and stock orders.
Ordering high-quality forged flanges from Remax is straightforward. To ensure our engineering team provides you with a precise and competitive quote, please specify the exact flange type, nominal pipe size (NPS), pressure class rating, material grade, and facing configuration. Let us know your total quantity requirements and if you require any specialized testing or custom coatings. Contact us via email or phone for a quick, same-day response.
Send us your drawing, specifications, or inquiry details. Our technical engineering team will review your specs and provide a firm commercial quotation with EN 10204 3.1 certification within 30 minutes.
Let our experts take over from here!