FlangesType x IndustrySocket Weld Flange for Power Generation Industry

Socket Weld Flange for Power Generation Industry

Forged socket weld flanges for the small-bore lines of a power plant (drains, vents, instrument, sampling and chemical-dosing lines), made to ASME B16.5 at our Mumbai works in carbon steel, Cr-Mo and stainless grades, with the socket bored to the schedule of your pipe.

EN 10204 3.1 MTC & third-party inspection allowed

Technical Overview & Sourcing Context

Remax Forge & Fittings is an ISO 9001:2015 certified manufacturer of forged flanges based in Mumbai, India. We deliver custom-engineered, fully-traceable forged piping components designed to meet strict industrial specifications for socket weld flange for power generation industry across global infrastructure, chemical processing, oil & gas, and power generation projects.

Full Traceability

Every flange stamped with heat number, pressure rating, grade & size.

Zero-Defect Quality

Spectro PMI analysis, ultrasonic testing, hydrostatic testing & MTC 3.1/3.2.

Written Quotation

Price, production time and freight terms confirmed in writing for your exact list.

Where socket weld flanges fit in power piping

A socket weld flange takes the pipe end into a counterbored socket and is joined with a single external fillet weld. On small-bore lines this is quicker to fit up than a butt weld and needs no backing ring, which suits the large number of drain, vent, trap and instrument connections around boilers, HRSGs, turbines and feedwater heaters.

Power piping is designed to ASME B31.1, which sets the limits on where socket welds may be used. Check your project's piping class for the maximum size and the services where socket welds are allowed before you order.

Installation points that affect what you order

  • Socket bore: give the pipe schedule. The bore must match the pipe wall so the flow path stays smooth.
  • Expansion gap: standard practice is to withdraw the pipe about 1.6 mm (1/16") from the socket bottom before welding, so the weld does not crack when the pipe heats up.
  • Crevice: the gap left inside the socket can trap fluid. In corrosive or chemical-dosing service, confirm with your specification that socket welds are acceptable.
  • Material match: order the flange in the same P-number family as the pipe (A105 with carbon steel, F22 with P22, F91 with P91) so the weld procedure covers the joint.

Grades we supply for small-bore power lines

ServiceFlange grade
Water, low-temperature drains and ventsASTM A105
Steam drains and trap lines on Cr-Mo headersASTM A182 F11, F22, F91
Sampling, chemical dosing and instrument linesASTM A182 F304L / F316L
Material CategoryGrades / Specifications
Stainless Steel Socket Weld Flange for Power Generation IndustryASTM/ASME A/SA182: F304, F304L, F316, F316L, F316H, F316Ti, F321, F347; Cast: CF3, CF3M, CF8, CF8M; DIN: 1.4301, 1.4306, 1.4401, 1.4404, 1.4408, 1.4409
Duplex Steel Socket Weld Flange for Power Generation IndustryUNS S31803/S32205 — ASTM A182 Gr F51, F52, F53, F54, F55, F57, F59, F60, F61
Super Duplex Socket Weld Flange for Power Generation IndustryUNS S32750/S32760 — ASTM A182 Gr F53, F55; Zeron 100
Carbon Steel Socket Weld Flange for Power Generation IndustryASTM/ASME A/SA105, A105N, A216-WCB; A350 LF2 (low temp); A694 F52/F56/F60/F65/F70/F80 (high yield); DIN 1.0460, 1.0402, 1.0619
Alloy Steel Socket Weld Flange for Power Generation IndustryASTM A182/ASME SA182: F5, F9, F11, F12, F22, F91 (all P-grades for high temp service)
Nickel Alloy Socket Weld Flange for Power Generation IndustryInconel 600, 601, 625, 718, 690, X750 (ASTM B564/ASME SB564); Incoloy 800, 800H, 800HT, 825, 925
Hastelloy Socket Weld Flange for Power Generation IndustryC276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X (ASTM B564)
Monel Socket Weld Flange for Power Generation IndustryMonel 400 (UNS N04400), Monel K500 (UNS N05500) — ASTM B564
Pure Nickel Socket Weld Flange for Power Generation IndustryNickel 200, 201, 205, 205LC — ASTM B564/ASME SB564
Copper Nickel Socket Weld Flange for Power Generation IndustryCuNi 90/10 (C70600), CuNi 70/30 (C71500), UNS C71640 — ASTM/ASME SB 61/62/151/152
Titanium Socket Weld Flange for Power Generation IndustryGr.1, Gr.2, Gr.4, Gr.5, Gr.7 — ASTM B381/ASME SB381; R50250/R50400/R50550/R50700/R52400/R53400/R56400
Aluminium Socket Weld Flange for Power Generation Industry5052, 6061, 6063, 2017, 7075
Brass Socket Weld Flange for Power Generation Industry3602, 2604, H59, H62
Special Alloy Socket Weld Flange for Power Generation IndustryAlloy 20 (ASTM B462 SB462 — Carpenter 20Cb-3); SMO 254/6Mo (UNS S31254, DIN 1.4547); Al6XN; AISI 4130; AISI 4140; Nimonic 75/80A/90; Gunmetal; Cast Iron
Standard / SpecScope / Application Details
🇺🇸ANSI/ASME B16.5NPS ½" to 24" — the primary standard for most flanges
🇺🇸ASME B16.47 Series A (MSS SP-44)NPS 26" to 60" — large diameter
🇺🇸ASME B16.47 Series B (API 605)NPS 26" to 60" — large diameter (lighter)
🇺🇸ASME B16.36Orifice flanges
🇺🇸ASME B16.48Line blinds & spectacle blinds
🇪🇺DIN 2501 / EN 1092-1European metric standard — PN ratings
🇯🇵JIS B2220Japanese Industrial Standard
🇬🇧BS 4504 / BS 10 Table D/E/F/HBritish Standard
🇺🇸MSS SP-44Large diameter steel pipeline flanges
🇺🇸API 6AWellhead and Christmas tree equipment
🇺🇸API 605Large diameter carbon steel flanges
🇺🇸AWWA C207Water works flanges
🇷🇺GOST 12820 / 12821Russian/CIS standard
🇦🇺AS 2129 / AS 4087 / AS/NZS 4331.1Australian standard
🇰🇷KS B1503Korean standard
🌐ISO 7005-1 / ISO 9624International standard
🇺🇸SAE J518Hydraulic flanged tube fittings
🇨🇳GB StandardChinese national standard
Raised Gasket Area

Raised Face (RF)

Most common. A raised circular ring that concentrates pressure on a smaller area to compress the gasket. Height: 1/16" for Class 150/300; 1/4" for Class 400 and above.

100% Flat Mating Surface

Flat Face (FF)

No raised portion; entire flange face is in the same plane. Used when mating against cast iron or non-metallic flanges to avoid cracking on bolt tightening.

Deep Metallic Ring Groove

Ring Type Joint (RTJ)

Oval or octagonal groove machined into the face; a metal ring gasket seats in the groove. Used in high-pressure, high-temperature critical service (refineries, oil fields).

Interlocking Alignment

Tongue & Groove (T&G)

One flange has a raised ring (tongue); the other a matching groove. Provides excellent alignment and a confined gasket. Used in pumps and valve bonnets.

Recessed Female Mating

Male & Female (M&F)

Similar to T&G but the female face is flat and the male face raised. Used in heat exchangers, pressure vessels, and high-integrity process joints.

Heavy-Duty Contact

Large Male & Female

Same operating principle as the standard Male & Female flange, scaled up with larger step contact surfaces for specialized heavy industrial equipment.

Hydrostatic / Hydro Pressure Test

Each flange pressure tested at 1.5x working pressure per ASME code requirements.

Ultrasonic Testing (UT)

Non-destructive testing to detect internal sub-surface cracks, inclusions and forging defects.

Radiographic Testing (RT / X-Ray)

100% radiography available; mandatory for critical Class 900+ high pressure services.

Positive Material Identification (PMI)

Spectrometer validation to verify alloy chemistry precisely matches the Mill Test Certificate.

Dye Penetrant Test (DPT / LPT)

Detects micro surface cracking and porosity on critical machined seating surfaces.

Magnetic Particle Inspection (MPI)

For ferromagnetic alloys; flags surface and near-surface structural discontinuities.

Hardness Test (Brinell/Rockwell)

Verifies correct heat treatment structure and ensures mechanical properties are hit.

Direct-Reading Spectrograph

In-house lab chemical checks of billets before forging process begins.

Impact / Charpy Test

Crucial for low-temperature applications to verify ductility (e.g. A350 LF2, LTCS).

NACE Compliance Testing

Verifies sour-gas / H2S environment service capability (NACE MR0175 / MR0103).

Mill Test Certificate (MTC)

Provided as per EN 10204 3.1 detailing chemical & mechanical analysis.

EN 10204 3.2 Certificate

Independent third-party inspection validation (available upon request).

NACE MR0175 / MR0103 Compliance

Certified suitability for sour gas/H2S environments.

Raw Materials Certificate

Provides 100% trace origin tracking from steel billet to finished flange.

Dimensional Inspection Report

All critical tolerances checked and certified against CAD designs.

Heat Treatment Certificate

HTR and PWHT thermal chart records included where requested.

Hydrostatic Test Certificate

Pressure log documentation verifying weld integrity.

Third Party Inspection (TPI)

Bureau Veritas, SGS, Lloyds, DNV, TUV inspection options.

Packing List & Weight Certificate

Proper documentation for simple custom clearance and cargo log.

Country of Origin Certificate

Enables import tariff relief and compliance logging.

🔒 Certified Compliance Guaranteed

Frequently Asked Questions

Q: What sizes are socket weld flanges made in?

Socket weld flanges are small-bore flanges. ASME B16.5 covers them only in the smaller NPS sizes, and the range depends on pressure class. Tell us the NPS and class you need, and we will confirm it against the standard in the quotation.

Q: Why leave a gap at the bottom of the socket?

A gap of about 1.6 mm (1/16") between the pipe end and the socket shoulder lets the pipe expand when it heats up, so the fillet weld is not cracked by thermal growth. It is standard practice in ASME B31.1 and B31.3 piping.

Q: Can you supply F91 socket weld flanges?

Yes. ASTM A182 F91 socket weld flanges are supplied normalised and tempered, with the results on the EN 10204 3.1 certificate, for drains and vents on P91 headers.

Q: Socket weld or threaded flange for small-bore steam lines?

Socket weld flanges give a seal-welded joint and are generally preferred on steam and high-temperature lines. Threaded flanges are used where welding is not allowed. Your piping specification decides which is permitted.

Why Choose Remax Forge?

Remax Forge & Fittings stands out as a leading flange manufacturer due to our complete in-house forging, heat treatment, and precision CNC machining capabilities based in Mumbai. We provide certified compliance, factory-direct wholesale pricing, and custom forging schedules tailored to your engineering blueprints. With over 20 years of manufacturing experience, zero-defect quality management, and short lead times, we are a trusted supply partner for critical industrial piping projects.

ISO 9001:2015 Certified

Fully audited quality management workflows.

In-House Forging

Forging, heat-treat, machining in Mumbai.

Testing Laboratory

PMI, Spectro, UT, Hydro labs on-site.

Mill Certificates

EN 10204 3.1 standard; 3.2 available.

20+ Years Experience

Serving critical gas/oil clients globally.

45+ Export Countries

Proven global logistics and documentation.

Custom Forging

Special shapes, alloys and schedules.

Factory-Direct Price

Competitive pricing with no agent markup.

Technical Support

Engineers ready to assist spec selection.

Short Lead Times

Fast turnaround of custom and stock orders.

Global Export Network

AmericasUSA (Texas, Houston, Louisiana), Canada, Brazil, Colombia, Mexico
Middle EastUAE (Dubai, Abu Dhabi), Saudi Arabia, Qatar, Kuwait, Oman, Bahrain, Iraq, Iran
AfricaNigeria (Lagos, Port Harcourt), Ghana, South Africa, Egypt, Kenya, Libya
EuropeGermany, Italy, Netherlands, Norway (Stavanger), Spain, France, UK
Asia-PacificSingapore, Malaysia, Indonesia, Vietnam, Australia, South Korea, Japan
Central AsiaKazakhstan, Azerbaijan, Turkmenistan
🌍 Trusted logistics across 6 continents
Procurement Process

How to Order

Ordering high-quality forged flanges from Remax is straightforward. To ensure our engineering team provides you with a precise and competitive quote, please specify the exact flange type, nominal pipe size (NPS), pressure class rating, material grade, and facing configuration. Let us know your total quantity requirements and if you require any specialized testing or custom coatings. Contact us via email or phone.

1Flange Type (e.g. Weld Neck, Slip On, Blind, etc.)
2Size — NPS (Nominal Pipe Size) in inches (e.g. 2", 4", 10")
3Pressure Class (e.g. 150#, 300#, 600#, 900#, 1500#, 2500#)
4Material Grade (e.g. ASTM A105, A182 F316L, A182 F51)
5Facing Type (RF / FF / RTJ / T&G / M&F)
6Quantity required
7Standard / Specification (ASME B16.5, DIN, JIS, etc.)
8Any special requirements (NACE, low-temp, PMI, 3rd party inspection, surface coating)

Direct Inquiries

Estimated Lead Times

Standard sizes & specs:7–14 days
Special alloys / customs:3–6 weeks

Ready to Quote Your Custom Flange Project?

Send us your drawing, specifications, or inquiry details. Our technical engineering team will review your specs and provide a firm written quotation with price, production time and EN 10204 3.1 certification.