Spectacle blinds (figure-8 blanks), paddle blanks and spacers made to ASME B16.48 for positive isolation of steam, feedwater, fuel gas and auxiliary systems in power plants, supplied in carbon steel and Cr-Mo grades to match the flanges they sit between.
Remax Forge & Fittings is an ISO 9001:2015 certified manufacturer of forged flanges based in Mumbai, India. We deliver custom-engineered, fully-traceable forged piping components designed to meet strict industrial specifications for spectacle blind flange for power generation industry across global infrastructure, chemical processing, oil & gas, and power generation projects.
Every flange stamped with heat number, pressure rating, grade & size.
Spectro PMI analysis, ultrasonic testing, hydrostatic testing & MTC 3.1/3.2.
Price, production time and freight terms confirmed in writing for your exact list.
A closed valve is not positive isolation. Before work on a turbine, boiler, heater or fuel gas skid, maintenance procedures usually call for a physical blank in the line. A spectacle blind stays in the flanged joint permanently: one end is solid (line blanked), the other is a ring (line open). Turning it over switches the line between the two states, and the blind always shows which state the line is in.
Typical locations are steam and feedwater branches to equipment taken out for maintenance, fuel gas supplies to gas turbines and boilers, chemical dosing connections and hydrotest break points.
ASME B16.48 covers spectacle blinds, paddle blanks and paddle spacers for Classes 150 to 2500. On large sizes and high classes, a one-piece spectacle blind becomes heavy to handle, so a separate paddle blank and paddle spacer are often specified instead. The thickness is set by the standard for each size and class, so the blind must be ordered in the same class as the mating flanges.
| Line | Typical blind material |
|---|---|
| Water, low-temperature steam, fuel gas | ASTM A105 or A516 Gr 70 |
| Cr-Mo steam lines | ASTM A182 F11, F22, F91, matching the line |
| Chemical dosing and sampling | ASTM A182 F316L |
Isolation points are usually listed in the outage or commissioning plan long before the work starts. Send the full list in one enquiry, with tag or line number, size, class, facing, material and quantity per item. The quotation can then confirm production time against the outage date, and the blinds can be marked with your tag numbers if your specification requires it.
| Material Category | Grades / Specifications |
|---|---|
| Stainless Steel Spectacle Blind Flange for Power Generation Industry | ASTM/ASME A/SA182: F304, F304L, F316, F316L, F316H, F316Ti, F321, F347; Cast: CF3, CF3M, CF8, CF8M; DIN: 1.4301, 1.4306, 1.4401, 1.4404, 1.4408, 1.4409 |
| Duplex Steel Spectacle Blind Flange for Power Generation Industry | UNS S31803/S32205 — ASTM A182 Gr F51, F52, F53, F54, F55, F57, F59, F60, F61 |
| Super Duplex Spectacle Blind Flange for Power Generation Industry | UNS S32750/S32760 — ASTM A182 Gr F53, F55; Zeron 100 |
| Carbon Steel Spectacle Blind Flange for Power Generation Industry | ASTM/ASME A/SA105, A105N, A216-WCB; A350 LF2 (low temp); A694 F52/F56/F60/F65/F70/F80 (high yield); DIN 1.0460, 1.0402, 1.0619 |
| Alloy Steel Spectacle Blind Flange for Power Generation Industry | ASTM A182/ASME SA182: F5, F9, F11, F12, F22, F91 (all P-grades for high temp service) |
| Nickel Alloy Spectacle Blind Flange for Power Generation Industry | Inconel 600, 601, 625, 718, 690, X750 (ASTM B564/ASME SB564); Incoloy 800, 800H, 800HT, 825, 925 |
| Hastelloy Spectacle Blind Flange for Power Generation Industry | C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X (ASTM B564) |
| Monel Spectacle Blind Flange for Power Generation Industry | Monel 400 (UNS N04400), Monel K500 (UNS N05500) — ASTM B564 |
| Pure Nickel Spectacle Blind Flange for Power Generation Industry | Nickel 200, 201, 205, 205LC — ASTM B564/ASME SB564 |
| Copper Nickel Spectacle Blind Flange for Power Generation Industry | CuNi 90/10 (C70600), CuNi 70/30 (C71500), UNS C71640 — ASTM/ASME SB 61/62/151/152 |
| Titanium Spectacle Blind Flange for Power Generation Industry | Gr.1, Gr.2, Gr.4, Gr.5, Gr.7 — ASTM B381/ASME SB381; R50250/R50400/R50550/R50700/R52400/R53400/R56400 |
| Aluminium Spectacle Blind Flange for Power Generation Industry | 5052, 6061, 6063, 2017, 7075 |
| Brass Spectacle Blind Flange for Power Generation Industry | 3602, 2604, H59, H62 |
| Special Alloy Spectacle Blind Flange for Power Generation Industry | Alloy 20 (ASTM B462 SB462 — Carpenter 20Cb-3); SMO 254/6Mo (UNS S31254, DIN 1.4547); Al6XN; AISI 4130; AISI 4140; Nimonic 75/80A/90; Gunmetal; Cast Iron |
| Standard / Spec | Scope / Application Details |
|---|---|
| 🇺🇸ANSI/ASME B16.5 | NPS ½" to 24" — the primary standard for most flanges |
| 🇺🇸ASME B16.47 Series A (MSS SP-44) | NPS 26" to 60" — large diameter |
| 🇺🇸ASME B16.47 Series B (API 605) | NPS 26" to 60" — large diameter (lighter) |
| 🇺🇸ASME B16.36 | Orifice flanges |
| 🇺🇸ASME B16.48 | Line blinds & spectacle blinds |
| 🇪🇺DIN 2501 / EN 1092-1 | European metric standard — PN ratings |
| 🇯🇵JIS B2220 | Japanese Industrial Standard |
| 🇬🇧BS 4504 / BS 10 Table D/E/F/H | British Standard |
| 🇺🇸MSS SP-44 | Large diameter steel pipeline flanges |
| 🇺🇸API 6A | Wellhead and Christmas tree equipment |
| 🇺🇸API 605 | Large diameter carbon steel flanges |
| 🇺🇸AWWA C207 | Water works flanges |
| 🇷🇺GOST 12820 / 12821 | Russian/CIS standard |
| 🇦🇺AS 2129 / AS 4087 / AS/NZS 4331.1 | Australian standard |
| 🇰🇷KS B1503 | Korean standard |
| 🌐ISO 7005-1 / ISO 9624 | International standard |
| 🇺🇸SAE J518 | Hydraulic flanged tube fittings |
| 🇨🇳GB Standard | Chinese national standard |
Most common. A raised circular ring that concentrates pressure on a smaller area to compress the gasket. Height: 1/16" for Class 150/300; 1/4" for Class 400 and above.
No raised portion; entire flange face is in the same plane. Used when mating against cast iron or non-metallic flanges to avoid cracking on bolt tightening.
Oval or octagonal groove machined into the face; a metal ring gasket seats in the groove. Used in high-pressure, high-temperature critical service (refineries, oil fields).
One flange has a raised ring (tongue); the other a matching groove. Provides excellent alignment and a confined gasket. Used in pumps and valve bonnets.
Similar to T&G but the female face is flat and the male face raised. Used in heat exchangers, pressure vessels, and high-integrity process joints.
Same operating principle as the standard Male & Female flange, scaled up with larger step contact surfaces for specialized heavy industrial equipment.
Each flange pressure tested at 1.5x working pressure per ASME code requirements.
Non-destructive testing to detect internal sub-surface cracks, inclusions and forging defects.
100% radiography available; mandatory for critical Class 900+ high pressure services.
Spectrometer validation to verify alloy chemistry precisely matches the Mill Test Certificate.
Detects micro surface cracking and porosity on critical machined seating surfaces.
For ferromagnetic alloys; flags surface and near-surface structural discontinuities.
Verifies correct heat treatment structure and ensures mechanical properties are hit.
In-house lab chemical checks of billets before forging process begins.
Crucial for low-temperature applications to verify ductility (e.g. A350 LF2, LTCS).
Verifies sour-gas / H2S environment service capability (NACE MR0175 / MR0103).
Provided as per EN 10204 3.1 detailing chemical & mechanical analysis.
Independent third-party inspection validation (available upon request).
Certified suitability for sour gas/H2S environments.
Provides 100% trace origin tracking from steel billet to finished flange.
All critical tolerances checked and certified against CAD designs.
HTR and PWHT thermal chart records included where requested.
Pressure log documentation verifying weld integrity.
Bureau Veritas, SGS, Lloyds, DNV, TUV inspection options.
Proper documentation for simple custom clearance and cargo log.
Enables import tariff relief and compliance logging.
ASME B16.48 (Line Blanks) covers spectacle blinds, paddle blanks and paddle spacers, sized to fit between ASME B16.5 and B16.47 flanges in Classes 150 to 2500.
Yes. The blind thickness is set by its pressure class, so it must match the class of the line. A lower-class blind may not hold the line's test or design pressure.
Yes. Spectacle blinds and paddle blanks can be supplied in Cr-Mo grades to match high-temperature steam lines. State the grade and the mating flange class in the RFQ.
Order the facing that matches the mating flanges. RTJ blinds have ring grooves on both faces for ring-type joint gaskets on high-pressure lines.
Remax Forge & Fittings stands out as a leading flange manufacturer due to our complete in-house forging, heat treatment, and precision CNC machining capabilities based in Mumbai. We provide certified compliance, factory-direct wholesale pricing, and custom forging schedules tailored to your engineering blueprints. With over 20 years of manufacturing experience, zero-defect quality management, and short lead times, we are a trusted supply partner for critical industrial piping projects.
Fully audited quality management workflows.
Forging, heat-treat, machining in Mumbai.
PMI, Spectro, UT, Hydro labs on-site.
EN 10204 3.1 standard; 3.2 available.
Serving critical gas/oil clients globally.
Proven global logistics and documentation.
Special shapes, alloys and schedules.
Competitive pricing with no agent markup.
Engineers ready to assist spec selection.
Fast turnaround of custom and stock orders.
Ordering high-quality forged flanges from Remax is straightforward. To ensure our engineering team provides you with a precise and competitive quote, please specify the exact flange type, nominal pipe size (NPS), pressure class rating, material grade, and facing configuration. Let us know your total quantity requirements and if you require any specialized testing or custom coatings. Contact us via email or phone.
Send us your drawing, specifications, or inquiry details. Our technical engineering team will review your specs and provide a firm written quotation with price, production time and EN 10204 3.1 certification.
Direct factory pricing. No public phone calls needed.