FlangesType x IndustryWeld Neck Flange for Petrochemical Industry

Weld Neck Flange for Petrochemical Industry

Remax Forge & Fittings manufactures forged weld neck flanges for petrochemical process piping at its Mumbai works: ASME B16.5 (NPS ½"–24") and ASME B16.47 (NPS 26"–60"), Classes 150 to 2500, raised face or ring type joint, each bored to the schedule of the pipe it is welded to and shipped with an EN 10204 3.1 mill test certificate.

EN 10204 3.1 MTC & third-party inspection allowed

Technical Overview & Sourcing Context

Remax Forge & Fittings is an ISO 9001:2015 certified manufacturer of forged flanges based in Mumbai, India. We deliver custom-engineered, fully-traceable forged piping components designed to meet strict industrial specifications for weld neck flange for petrochemical industry across global infrastructure, chemical processing, oil & gas, and power generation projects.

Full Traceability

Every flange stamped with heat number, pressure rating, grade & size.

Zero-Defect Quality

Spectro PMI analysis, ultrasonic testing, hydrostatic testing & MTC 3.1/3.2.

Written Quotation

Price, production time and freight terms confirmed in writing for your exact list.

Why petrochemical piping specifies weld neck flanges

Process lines in crackers, reformers, aromatics and polymer units see high temperature, pressure swings and thermal cycling at start-up and shutdown. A weld neck flange is butt-welded to the pipe and its tapered hub carries bending and thermal stress away from the flange ring, so the joint can be fully radiographed and stands up to cyclic loading better than slip on or lap joint designs.

Process piping in these plants is normally designed to ASME B31.3. The flange class you order follows from the line's design pressure and temperature in the pressure–temperature tables of ASME B16.5, not from the operating pressure alone.

Material grades by petrochemical service

ServiceTypical flange grade
General hydrocarbon and utility linesASTM A105 / A105N carbon steel
Low-temperature lines down to −46 °C (e.g. propane, refrigerant circuits)ASTM A350 LF2 Class 1
Cryogenic ethylene and LNG lines below −46 °CASTM A182 F304/304L, F316/316L
High-temperature furnace outlet and hydrogen serviceASTM A182 F11, F22 (Cr-Mo)
High-temperature lines at risk of sensitisation or polythionic acid crackingASTM A182 F321, F347
Chloride-bearing or corrosive process streamsASTM A182 F51 duplex, F53 super duplex, nickel alloys

The licensor or owner's piping material specification always decides the grade; this table is a starting point for the RFQ, not a substitute for it.

Facing, bore and testing to state in the order

  • Facing: ASME B16.5 raised face is 1.6 mm high for Classes 150 and 300 and 6.4 mm for Class 600 and above. Ring type joint (RTJ) facing is common on high-pressure and hydrogen lines.
  • Bore: give the pipe schedule (e.g. Sch 40, Sch 80, XS) so the weld bevel matches the pipe wall.
  • Wet H2S service: name the requirement (NACE MR0175 / ISO 15156 or NACE MR0103) so hardness limits are applied in manufacture and recorded on the MTC.
  • Inspection: PMI, ultrasonic testing and third-party inspection at our works can be added to the order.
Material CategoryGrades / Specifications
Stainless Steel Weld Neck Flange for Petrochemical IndustryASTM/ASME A/SA182: F304, F304L, F316, F316L, F316H, F316Ti, F321, F347; Cast: CF3, CF3M, CF8, CF8M; DIN: 1.4301, 1.4306, 1.4401, 1.4404, 1.4408, 1.4409
Duplex Steel Weld Neck Flange for Petrochemical IndustryUNS S31803/S32205 — ASTM A182 Gr F51, F52, F53, F54, F55, F57, F59, F60, F61
Super Duplex Weld Neck Flange for Petrochemical IndustryUNS S32750/S32760 — ASTM A182 Gr F53, F55; Zeron 100
Carbon Steel Weld Neck Flange for Petrochemical IndustryASTM/ASME A/SA105, A105N, A216-WCB; A350 LF2 (low temp); A694 F52/F56/F60/F65/F70/F80 (high yield); DIN 1.0460, 1.0402, 1.0619
Alloy Steel Weld Neck Flange for Petrochemical IndustryASTM A182/ASME SA182: F5, F9, F11, F12, F22, F91 (all P-grades for high temp service)
Nickel Alloy Weld Neck Flange for Petrochemical IndustryInconel 600, 601, 625, 718, 690, X750 (ASTM B564/ASME SB564); Incoloy 800, 800H, 800HT, 825, 925
Hastelloy Weld Neck Flange for Petrochemical IndustryC276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X (ASTM B564)
Monel Weld Neck Flange for Petrochemical IndustryMonel 400 (UNS N04400), Monel K500 (UNS N05500) — ASTM B564
Pure Nickel Weld Neck Flange for Petrochemical IndustryNickel 200, 201, 205, 205LC — ASTM B564/ASME SB564
Copper Nickel Weld Neck Flange for Petrochemical IndustryCuNi 90/10 (C70600), CuNi 70/30 (C71500), UNS C71640 — ASTM/ASME SB 61/62/151/152
Titanium Weld Neck Flange for Petrochemical IndustryGr.1, Gr.2, Gr.4, Gr.5, Gr.7 — ASTM B381/ASME SB381; R50250/R50400/R50550/R50700/R52400/R53400/R56400
Aluminium Weld Neck Flange for Petrochemical Industry5052, 6061, 6063, 2017, 7075
Brass Weld Neck Flange for Petrochemical Industry3602, 2604, H59, H62
Special Alloy Weld Neck Flange for Petrochemical IndustryAlloy 20 (ASTM B462 SB462 — Carpenter 20Cb-3); SMO 254/6Mo (UNS S31254, DIN 1.4547); Al6XN; AISI 4130; AISI 4140; Nimonic 75/80A/90; Gunmetal; Cast Iron
Standard / SpecScope / Application Details
🇺🇸ANSI/ASME B16.5NPS ½" to 24" — the primary standard for most flanges
🇺🇸ASME B16.47 Series A (MSS SP-44)NPS 26" to 60" — large diameter
🇺🇸ASME B16.47 Series B (API 605)NPS 26" to 60" — large diameter (lighter)
🇺🇸ASME B16.36Orifice flanges
🇺🇸ASME B16.48Line blinds & spectacle blinds
🇪🇺DIN 2501 / EN 1092-1European metric standard — PN ratings
🇯🇵JIS B2220Japanese Industrial Standard
🇬🇧BS 4504 / BS 10 Table D/E/F/HBritish Standard
🇺🇸MSS SP-44Large diameter steel pipeline flanges
🇺🇸API 6AWellhead and Christmas tree equipment
🇺🇸API 605Large diameter carbon steel flanges
🇺🇸AWWA C207Water works flanges
🇷🇺GOST 12820 / 12821Russian/CIS standard
🇦🇺AS 2129 / AS 4087 / AS/NZS 4331.1Australian standard
🇰🇷KS B1503Korean standard
🌐ISO 7005-1 / ISO 9624International standard
🇺🇸SAE J518Hydraulic flanged tube fittings
🇨🇳GB StandardChinese national standard
Raised Gasket Area

Raised Face (RF)

Most common. A raised circular ring that concentrates pressure on a smaller area to compress the gasket. Height: 1/16" for Class 150/300; 1/4" for Class 400 and above.

100% Flat Mating Surface

Flat Face (FF)

No raised portion; entire flange face is in the same plane. Used when mating against cast iron or non-metallic flanges to avoid cracking on bolt tightening.

Deep Metallic Ring Groove

Ring Type Joint (RTJ)

Oval or octagonal groove machined into the face; a metal ring gasket seats in the groove. Used in high-pressure, high-temperature critical service (refineries, oil fields).

Interlocking Alignment

Tongue & Groove (T&G)

One flange has a raised ring (tongue); the other a matching groove. Provides excellent alignment and a confined gasket. Used in pumps and valve bonnets.

Recessed Female Mating

Male & Female (M&F)

Similar to T&G but the female face is flat and the male face raised. Used in heat exchangers, pressure vessels, and high-integrity process joints.

Heavy-Duty Contact

Large Male & Female

Same operating principle as the standard Male & Female flange, scaled up with larger step contact surfaces for specialized heavy industrial equipment.

Hydrostatic / Hydro Pressure Test

Each flange pressure tested at 1.5x working pressure per ASME code requirements.

Ultrasonic Testing (UT)

Non-destructive testing to detect internal sub-surface cracks, inclusions and forging defects.

Radiographic Testing (RT / X-Ray)

100% radiography available; mandatory for critical Class 900+ high pressure services.

Positive Material Identification (PMI)

Spectrometer validation to verify alloy chemistry precisely matches the Mill Test Certificate.

Dye Penetrant Test (DPT / LPT)

Detects micro surface cracking and porosity on critical machined seating surfaces.

Magnetic Particle Inspection (MPI)

For ferromagnetic alloys; flags surface and near-surface structural discontinuities.

Hardness Test (Brinell/Rockwell)

Verifies correct heat treatment structure and ensures mechanical properties are hit.

Direct-Reading Spectrograph

In-house lab chemical checks of billets before forging process begins.

Impact / Charpy Test

Crucial for low-temperature applications to verify ductility (e.g. A350 LF2, LTCS).

NACE Compliance Testing

Verifies sour-gas / H2S environment service capability (NACE MR0175 / MR0103).

Mill Test Certificate (MTC)

Provided as per EN 10204 3.1 detailing chemical & mechanical analysis.

EN 10204 3.2 Certificate

Independent third-party inspection validation (available upon request).

NACE MR0175 / MR0103 Compliance

Certified suitability for sour gas/H2S environments.

Raw Materials Certificate

Provides 100% trace origin tracking from steel billet to finished flange.

Dimensional Inspection Report

All critical tolerances checked and certified against CAD designs.

Heat Treatment Certificate

HTR and PWHT thermal chart records included where requested.

Hydrostatic Test Certificate

Pressure log documentation verifying weld integrity.

Third Party Inspection (TPI)

Bureau Veritas, SGS, Lloyds, DNV, TUV inspection options.

Packing List & Weight Certificate

Proper documentation for simple custom clearance and cargo log.

Country of Origin Certificate

Enables import tariff relief and compliance logging.

🔒 Certified Compliance Guaranteed

Frequently Asked Questions

Q: Which pressure class should I order for a petrochemical weld neck flange?

Take the design pressure and design temperature of the line and read them against the ASME B16.5 pressure–temperature table for the flange material group. For carbon steel A105 (Group 1.1) at 38 °C, Class 150 is rated 19.6 bar, Class 300 51.1 bar and Class 600 102.1 bar, and the ratings fall as temperature rises. Your piping class sheet normally fixes this already.

Q: Can you supply weld neck flanges for hydrogen or high-temperature service?

Yes. Cr-Mo grades ASTM A182 F11 and F22 and stabilised stainless F321/F347 are supplied for high-temperature and hydrogen lines, with RTJ facing on request. State the design temperature and any licensor specification in your RFQ.

Q: Do you supply NACE-compliant weld neck flanges?

Yes. Flanges for sour service are made to the hardness limits of NACE MR0175 / ISO 15156, and compliance is stated on the mill test certificate. See our sour service flange page for details.

Q: What documents come with petrochemical flange orders?

Every order ships with an EN 10204 3.1 mill test certificate showing heat number, chemistry and mechanical results. EN 10204 3.2 certification and third-party inspection by your nominated agency can be arranged before dispatch.

Why Choose Remax Forge?

Remax Forge & Fittings stands out as a leading flange manufacturer due to our complete in-house forging, heat treatment, and precision CNC machining capabilities based in Mumbai. We provide certified compliance, factory-direct wholesale pricing, and custom forging schedules tailored to your engineering blueprints. With over 20 years of manufacturing experience, zero-defect quality management, and short lead times, we are a trusted supply partner for critical industrial piping projects.

ISO 9001:2015 Certified

Fully audited quality management workflows.

In-House Forging

Forging, heat-treat, machining in Mumbai.

Testing Laboratory

PMI, Spectro, UT, Hydro labs on-site.

Mill Certificates

EN 10204 3.1 standard; 3.2 available.

20+ Years Experience

Serving critical gas/oil clients globally.

45+ Export Countries

Proven global logistics and documentation.

Custom Forging

Special shapes, alloys and schedules.

Factory-Direct Price

Competitive pricing with no agent markup.

Technical Support

Engineers ready to assist spec selection.

Short Lead Times

Fast turnaround of custom and stock orders.

Global Export Network

AmericasUSA (Texas, Houston, Louisiana), Canada, Brazil, Colombia, Mexico
Middle EastUAE (Dubai, Abu Dhabi), Saudi Arabia, Qatar, Kuwait, Oman, Bahrain, Iraq, Iran
AfricaNigeria (Lagos, Port Harcourt), Ghana, South Africa, Egypt, Kenya, Libya
EuropeGermany, Italy, Netherlands, Norway (Stavanger), Spain, France, UK
Asia-PacificSingapore, Malaysia, Indonesia, Vietnam, Australia, South Korea, Japan
Central AsiaKazakhstan, Azerbaijan, Turkmenistan
🌍 Trusted logistics across 6 continents
Procurement Process

How to Order

Ordering high-quality forged flanges from Remax is straightforward. To ensure our engineering team provides you with a precise and competitive quote, please specify the exact flange type, nominal pipe size (NPS), pressure class rating, material grade, and facing configuration. Let us know your total quantity requirements and if you require any specialized testing or custom coatings. Contact us via email or phone.

1Flange Type (e.g. Weld Neck, Slip On, Blind, etc.)
2Size — NPS (Nominal Pipe Size) in inches (e.g. 2", 4", 10")
3Pressure Class (e.g. 150#, 300#, 600#, 900#, 1500#, 2500#)
4Material Grade (e.g. ASTM A105, A182 F316L, A182 F51)
5Facing Type (RF / FF / RTJ / T&G / M&F)
6Quantity required
7Standard / Specification (ASME B16.5, DIN, JIS, etc.)
8Any special requirements (NACE, low-temp, PMI, 3rd party inspection, surface coating)

Direct Inquiries

Estimated Lead Times

Standard sizes & specs:7–14 days
Special alloys / customs:3–6 weeks

Ready to Quote Your Custom Flange Project?

Send us your drawing, specifications, or inquiry details. Our technical engineering team will review your specs and provide a firm written quotation with price, production time and EN 10204 3.1 certification.