Flanges, butt-weld and forged fittings for Coimbatore's engineering, foundry & forging and textile units, made at our ISO 9001:2015 works in Mumbai, dispatched from stock in 24–48 h and delivered in about 3 days, with EN 10204 3.1 certificates.
Heavy machining, hydraulic loops, and tooling assemblies: Forged Hub Flanges, Threaded Couplings.
Ex-stock dispatch from Mumbai in 24–48 h, then road freight to Coimbatore.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades held in stock.

Around Peelamedu, SIDCO Kurichi, Arasur foundry belt, procurement runs on Pump & motor capital of India, foundry cluster (600+), textile machinery, wet grinders. We serve this demand from Mumbai with forged fittings, SW elbows and threaded flanges in A105, SS 304/316, built to ASME B16.5/B16.11 and documented with EN 10204 3.1 certificates.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Coimbatore, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Coimbatore's demand for flanges and fittings comes mainly from Pump & motor capital of India, foundry cluster (600+), textile machinery, wet grinders. Engineering and auto-component workshops order 3000# and 6000# forged fittings, threaded and slip-on flanges and hydraulic couplings in A105 and SS 304/316. Casting and forging units need robust carbon steel flanges, high-pressure hydraulic fittings and blind flanges for isolating press and furnace lines. Textile, dyeing and processing mills buy SS 304 flanges and socket-weld fittings for dye-kitchen and effluent lines, and A105 flanges for steam headers.
Orders for Coimbatore leave our Mumbai stock within 24–48 hours and travel by road on NH48 via Bengaluru–Salem (~1,080 km), so material is usually on site in about 3 days. Custom forgings and non-stock sizes take 7–15 working days. To quote quickly we need the size (NPS or DN), pressure class, facing (RF, FF or RTJ), material grade and the schedule of the mating pipe.
Every lot ships with an EN 10204 3.1 mill test certificate, and heat numbers are marked on each piece so they can be traced back to it. Alloy and stainless items can be PMI-checked before dispatch, and inspection by your own or a third-party agency is welcome at our works. We use the same route to serve Salem, Tiruchirappalli, Madurai and Chennai, so mixed orders for plants in the region can be planned together.
| Service | Flanges & fittings usually specified |
|---|---|
| Hydraulic & compressed-air circuits | A105 / SS 316 forged fittings, 3000# and 6000#, socket-weld or threaded |
| Furnace air & cooling circuits | A105 weld neck and slip-on flanges, Class 150–300 |
| Dye-kitchen & effluent lines | SS 304 / 316 slip-on flanges and socket-weld fittings |
| Machine & test-rig piping | Threaded and slip-on flanges to ASME B16.5, Class 150–600 |
| Hydraulic press lines | 6000# forged fittings and Class 1500 weld neck flanges |
| Steam headers | A105 flanges and 3000# forged fittings |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in A105, SS 304/316, Class 150–2500, for engineering piping in Coimbatore.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for foundry & forging lines in Coimbatore.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at textile units in Coimbatore.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Heavy machining, hydraulic loops, and tooling assemblies
Forged Hub Flanges, Threaded Couplings

Blast furnace air lines, hydraulic presses & casting equipment utilities
A105 Weld Neck Flanges, Heavy Wall Forged Fittings

Dyeing tank utilities, steam headers & waste lines
SS 304 Flanges, Socket Weld Couplings
Route: NH48 via Bengaluru–Salem (~1,080 km). Ex-stock dispatch 24–48 h from Mumbai; road freight ≈ 3 days to Coimbatore. Custom forgings: 7–15 working days. Packing: seaworthy crates/pallets with rust-preventive coating. Docs: invoice, packing list, 3.1 MTC, test reports.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































We deliver Forged Fittings, SW Elbows, Threaded Flanges and Slip On Flanges to Coimbatore in A105, SS 304/316, dimensioned to ASME B16.5, B16.47 and B16.11. Demand here comes mainly from engineering & auto and textiles & process — including units around Peelamedu — and every lot ships with EN 10204 3.1 certification.
Workshops around Pump & motor capital of India mostly order 2000#, 3000# and 6000# forged fittings — elbows, tees, couplings and nipples in A105 and SS 304/316 — alongside slip-on and threaded flanges for air, hydraulic and steam lines. All items carry EN 10204 3.1 certification.
Honestly: ex-stock items dispatch from our Mumbai warehouse within 24–48 hours and reach Coimbatore in roughly 3 days by road (NH48 via Bengaluru–Salem (~1,080 km)). Custom forgings add 7–15 working days of production. We confirm a dated schedule with every quotation rather than promising blanket next-day delivery.
We deliver door-to-site across Coimbatore, including Peelamedu, SIDCO Kurichi and Arasur foundry belt, and to nearby Salem, Tiruchirappalli, Madurai and Chennai. Goods leave our Mumbai stock within 24–48 hours and travel by road on NH48 via Bengaluru–Salem (~1,080 km), normally arriving in about 3 days.
No — and we say so plainly. Manufacturing, stock and testing are at our ISO 9001:2015 facility in Mumbai; Coimbatore is served through scheduled road dispatches with full documentation. Buyers are welcome to audit the Mumbai works in person or by video inspection before ordering.
Every Coimbatore dispatch includes EN 10204 3.1 mill test certificates, dimensional reports and hydro/NDT test reports as ordered. 100% PMI is standard on alloy and stainless lots.
We keep MOQs low for the Coimbatore corridor — small lots are clubbed with our scheduled dispatches on this route, so a single-item trial order is workable. Project-quantity rates apply from roughly 100 pieces or 500 kg per grade.