Flanges, butt-weld and forged fittings for Tiruchirappalli's power & boiler, aerospace & defence and engineering units, made at our ISO 9001:2015 works in Mumbai, dispatched from stock in 24–48 h and delivered in about 4 days, with EN 10204 3.1 certificates.
Superheated steam lines, IBR boiler circuits & exhaust pipes: Alloy Steel P91/F22 Flanges, IBR Fittings.
Ex-stock dispatch from Mumbai in 24–48 h, then road freight to Tiruchirappalli.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades held in stock.

Tiruchirappalli's buyers order piping hardware for concrete reasons: BHEL Trichy boiler plant & India's largest boiler-fabrication cluster, OFT ordnance. From our Mumbai works we supply weld neck flanges, butt weld tees and concentric reducers into BHEL township, Thuvakudi SIDCO, fabrication belt, in A105, F11/F22/F91 (IBR) — dimensioned to ASME B16.5/B16.11 and certified to EN 10204 3.1.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Tiruchirappalli, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Tiruchirappalli's demand for flanges and fittings comes mainly from BHEL Trichy boiler plant & India's largest boiler-fabrication cluster, OFT ordnance. Power stations and boiler houses buy A105 and alloy F11/F22/F91 weld neck flanges and fittings for steam, feedwater and blow-down lines, with IBR documents where the line falls under the Indian Boiler Regulations. Defence and aerospace buyers usually ask for small-bore 6000# fittings, nickel-alloy or SS 316L flanges and test documentation to their own quality plan. Engineering and auto-component workshops order 3000# and 6000# forged fittings, threaded and slip-on flanges and hydraulic couplings in A105 and SS 304/316.
Orders for Tiruchirappalli leave our Mumbai stock within 24–48 hours and travel by road on NH48 via Bengaluru–Salem (~1,270 km), so material is usually on site in about 4 days. Custom forgings and non-stock sizes take 7–15 working days. To quote quickly we need the size (NPS or DN), pressure class, facing (RF, FF or RTJ), material grade and the schedule of the mating pipe.
Every lot ships with an EN 10204 3.1 mill test certificate, and heat numbers are marked on each piece so they can be traced back to it. Alloy and stainless items can be PMI-checked before dispatch, and inspection by your own or a third-party agency is welcome at our works. Steam-line items for boiler work can be supplied with IBR documents. We use the same route to serve Salem, Madurai, Coimbatore and Chennai, so mixed orders for plants in the region can be planned together.
| Service | Flanges & fittings usually specified |
|---|---|
| Main steam & feedwater | A182 F11 / F22 / F91 weld neck flanges, Class 600–2500, IBR where applicable |
| High-pressure test & fluid lines | 6000# / 9000# forged fittings in SS 316L or nickel alloy |
| Hydraulic & compressed-air circuits | A105 / SS 316 forged fittings, 3000# and 6000#, socket-weld or threaded |
| Auxiliary steam & drains | A105 flanges with 3000# / 6000# socket-weld fittings |
| Special-material flanges | Inconel 600 / 625 and Monel flanges with full traceability |
| Machine & test-rig piping | Threaded and slip-on flanges to ASME B16.5, Class 150–600 |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in A105, F11/F22/F91 (IBR), Class 150–2500, for power & boiler piping in Tiruchirappalli.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for aerospace & defence lines in Tiruchirappalli.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at engineering units in Tiruchirappalli.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Superheated steam lines, IBR boiler circuits & exhaust pipes
Alloy Steel P91/F22 Flanges, IBR Fittings

High-precision components for aviation & defence systems
Nickel Alloy Flanges, High-Pressure SW Fittings

Heavy machining, hydraulic loops, and tooling assemblies
Forged Hub Flanges, Threaded Couplings
Route: NH48 via Bengaluru–Salem (~1,270 km). Ex-stock dispatch 24–48 h from Mumbai; road freight ≈ 4 days to Tiruchirappalli. Custom forgings: 7–15 working days. Packing: seaworthy crates/pallets with rust-preventive coating. Docs: invoice, packing list, 3.1 MTC, test reports, IBR documentation where applicable.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































We deliver Weld Neck Flanges, Butt Weld Tees, Concentric Reducers and Boiler Quality Plates to Tiruchirappalli in A105, F11/F22/F91 (IBR), dimensioned to ASME B16.5, B16.47 and B16.11. Demand here comes mainly from power & boilers and engineering & auto — including units around BHEL township — and every lot ships with EN 10204 3.1 certification.
Yes. For steam service around BHEL Trichy boiler plant & India's largest boiler-fabrication cluster we supply A105, F11, F22 and F91 flanges, butt-weld tees and reducers with IBR documentation documentation, plus 3.1 MTCs and hydro test reports, so boiler inspectorate approvals in Tamil Nadu proceed without paperwork gaps.
Honestly: ex-stock items dispatch from our Mumbai warehouse within 24–48 hours and reach Tiruchirappalli in roughly 4 days by road (NH48 via Bengaluru–Salem (~1,270 km)). Custom forgings add 7–15 working days of production. We confirm a dated schedule with every quotation rather than promising blanket next-day delivery.
We deliver door-to-site across Tiruchirappalli, including BHEL township, Thuvakudi SIDCO and fabrication belt, and to nearby Salem, Madurai, Coimbatore and Chennai. Goods leave our Mumbai stock within 24–48 hours and travel by road on NH48 via Bengaluru–Salem (~1,270 km), normally arriving in about 4 days.
No — and we say so plainly. Manufacturing, stock and testing are at our ISO 9001:2015 facility in Mumbai; Tiruchirappalli is served through scheduled road dispatches with full documentation. Buyers are welcome to audit the Mumbai works in person or by video inspection before ordering.
Every Tiruchirappalli dispatch includes EN 10204 3.1 mill test certificates, dimensional reports and hydro/NDT test reports as ordered, IBR documentation for steam-service items. 100% PMI is standard on alloy and stainless lots.
We keep MOQs low for the Tiruchirappalli corridor — small lots are clubbed with our scheduled dispatches on this route, so a single-item trial order is workable. Project-quantity rates apply from roughly 100 pieces or 500 kg per grade.