Flanges, butt-weld and forged fittings for Ramagundam's power & boiler, cement & mining and fertilizer units, made at our ISO 9001:2015 works in Mumbai, dispatched from stock in 24–48 h and delivered in about 3 days, with EN 10204 3.1 certificates.
Superheated steam lines, IBR boiler circuits & exhaust pipes: Alloy Steel P91/F22 Flanges, IBR Fittings.
Ex-stock dispatch from Mumbai in 24–48 h, then road freight to Ramagundam.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades held in stock.

Around NTPC & SCCL township belt, procurement runs on NTPC Ramagundam super thermal (2,600 MW), SCCL coal, RFCL fertilizer plant. We serve this demand from Mumbai with weld neck flanges, butt weld tees and concentric reducers in A105, F11/F22/F91 (IBR), built to ASME B16.5/B16.11 and documented with EN 10204 3.1 certificates.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Ramagundam, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Ramagundam's demand for flanges and fittings comes mainly from NTPC Ramagundam super thermal (2,600 MW), SCCL coal, RFCL fertilizer plant. Power stations and boiler houses buy A105 and alloy F11/F22/F91 weld neck flanges and fittings for steam, feedwater and blow-down lines, with IBR documents where the line falls under the Indian Boiler Regulations. Mining and cement plants mostly buy A105 flanges, long-radius elbows for abrasive transport and Hardox-type plate for chutes and liners. Fertilizer complexes order A350 LF2 flanges for ammonia, SS 316L (urea grade where specified) for urea and carbamate lines, and duplex for cooling water.
Orders for Ramagundam leave our Mumbai stock within 24–48 hours and travel by road on NH63 via Hyderabad (~950 km), so material is usually on site in about 3 days. Custom forgings and non-stock sizes take 7–15 working days. To quote quickly we need the size (NPS or DN), pressure class, facing (RF, FF or RTJ), material grade and the schedule of the mating pipe.
Every lot ships with an EN 10204 3.1 mill test certificate, and heat numbers are marked on each piece so they can be traced back to it. Alloy and stainless items can be PMI-checked before dispatch, and inspection by your own or a third-party agency is welcome at our works. Steam-line items for boiler work can be supplied with IBR documents. We use the same route to serve Hyderabad, Warangal, Nizamabad and Khammam, so mixed orders for plants in the region can be planned together.
| Service | Flanges & fittings usually specified |
|---|---|
| Main steam & feedwater | A182 F11 / F22 / F91 weld neck flanges, Class 600–2500, IBR where applicable |
| Slurry & conveying lines | Thick-wall carbon steel flanges and long-radius elbows |
| Ammonia service | A350 LF2 weld neck flanges and A420 WPL6 fittings |
| Auxiliary steam & drains | A105 flanges with 3000# / 6000# socket-weld fittings |
| Chutes, liners & hoppers | Wear-resistant plate (Hardox-type), cut to size |
| Urea & carbamate lines | SS 316L (urea grade where specified) or super duplex F53 |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in A105, F11/F22/F91 (IBR), Class 150–2500, for power & boiler piping in Ramagundam.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for cement & mining lines in Ramagundam.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at fertilizer units in Ramagundam.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Superheated steam lines, IBR boiler circuits & exhaust pipes
Alloy Steel P91/F22 Flanges, IBR Fittings

Abrasive material handling & excavation slurry loops
Hardox Wear Plates, High-Thickness Flanges

Corrosive chemical transfer & high-pressure piping networks
Super Duplex Flanges, Custom Forged Tees
Route: NH63 via Hyderabad (~950 km). Ex-stock dispatch 24–48 h from Mumbai; road freight ≈ 3 days to Ramagundam. Custom forgings: 7–15 working days. Packing: seaworthy crates/pallets with rust-preventive coating. Docs: invoice, packing list, 3.1 MTC, test reports, IBR documentation where applicable.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































We deliver Weld Neck Flanges, Butt Weld Tees, Concentric Reducers and Boiler Quality Plates to Ramagundam in A105, F11/F22/F91 (IBR), dimensioned to ASME B16.5, B16.47 and B16.11. Demand here comes mainly from power & boilers and fertilizers — including units around NTPC & SCCL township belt — and every lot ships with EN 10204 3.1 certification.
Yes. For steam service around NTPC Ramagundam super thermal (2 we supply A105, F11, F22 and F91 flanges, butt-weld tees and reducers with IBR documentation documentation, plus 3.1 MTCs and hydro test reports, so boiler inspectorate approvals in Telangana proceed without paperwork gaps.
Honestly: ex-stock items dispatch from our Mumbai warehouse within 24–48 hours and reach Ramagundam in roughly 3 days by road (NH63 via Hyderabad (~950 km)). Custom forgings add 7–15 working days of production. We confirm a dated schedule with every quotation rather than promising blanket next-day delivery.
We deliver door-to-site across Ramagundam, including NTPC and SCCL township belt, and to nearby Hyderabad, Warangal, Nizamabad and Khammam. Goods leave our Mumbai stock within 24–48 hours and travel by road on NH63 via Hyderabad (~950 km), normally arriving in about 3 days.
No — and we say so plainly. Manufacturing, stock and testing are at our ISO 9001:2015 facility in Mumbai; Ramagundam is served through scheduled road dispatches with full documentation. Buyers are welcome to audit the Mumbai works in person or by video inspection before ordering.
Every Ramagundam dispatch includes EN 10204 3.1 mill test certificates, dimensional reports and hydro/NDT test reports as ordered, IBR documentation for steam-service items. 100% PMI is standard on alloy and stainless lots.
We keep MOQs low for the Ramagundam corridor — small lots are clubbed with our scheduled dispatches on this route, so a single-item trial order is workable. Project-quantity rates apply from roughly 100 pieces or 500 kg per grade.