Slip-on, weld neck and blind flanges for Nizamabad's sugar, corn and food processing plants and its irrigation pumping, made at our ISO 9001:2015 works in Mumbai and sent by road with EN 10204 3.1 certificates. The lead time is stated on your written quote.
Sanitary grade pipelines and food manufacturing lines: SS 304/316 Flanges, Buttweld Elbows.
Lead time for Nizamabad is stated on your written quote.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades supplied with an EN 10204 3.1 MTC.

Nizamabad is a farm district, so its flange buyers are sugar mills, corn and food processors and the irrigation works that supply them. Remax Forge supplies slip-on (SO) flanges, weld neck flanges for power stations and blind flanges for water works from our Mumbai works with an EN 10204 3.1 MTC. See also Hyderabad and Warangal.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Nizamabad, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Nizamabad district grows a large share of Telangana's turmeric and paddy, irrigated by the Sriram Sagar and Nizam Sagar projects. District profiles list Nizam Deccan Sugars at Shakkar Nagar, Indur Green Power and Nizamabad Corn Products among its main industries, and a food park in Nandipet mandal. The Nizam Sugar Factory at Bodhan dates from 1938, and the state government has said it is committed to reviving it.
A sugar mill uses flanges on the boiler and turbine steam lines, the juice and syrup lines and the cooling-water circuit. Steam lines take A105 weld neck flanges in Class 300 or higher, juice and syrup lines take SS 304 slip-on flanges, and the water side takes Class 150 or PN10/PN16. Corn and food plants add stainless process lines and CIP.
Mills rebuild during the off-season, so flange orders come in a batch before crushing starts. Send the off-season list early, with the crushing start date, and the quote will show the lead time for each item.
| Service | Flanges & fittings usually specified |
|---|---|
| Boiler and turbine steam | Weld neck RF, Class 300–900, A105 or F11/F22 |
| Juice and syrup lines | Slip-on, SS 304/316, Class 150 or PN10/PN16 |
| Cooling water and spray pond | Slip-on, Class 150 or PN10, A105 or galvanised |
| Irrigation lift pumps | Weld neck or slip-on to the pump drilling, with blinds |
What we quote most often for Shakkar Nagar, Bodhan, Nandipet mandal, Sriram Sagar and Nizam Sagar. Sizes, classes and grades below are those listed on our flange product pages; anything else is quoted against your specification.
| Types we quote | slip-on (SO) flanges, weld neck flanges for power stations, blind flanges for water works, plus blinds and spectacle blinds in the same class |
|---|---|
| Dimension standards | ASME B16.5 (NPS ½"–24"), ASME B16.47 Series A/B (NPS 26"–60"), EN 1092-1 (PN6–PN400) |
| Rating range | Class 150, 300, 400, 600, 900, 1500, 2500; PN6 to PN400 |
| Grades for Nizamabad service | A105 and F11/F22 for steam; SS 304/316 for juice, syrup and food lines; galvanised for water |
| Face options | RF, FF, RTJ, tongue & groove, male & female |
| Certificates | EN 10204 3.1 MTC with heat number on each piece; 3.2 on request |
| Dispatch | By road from Mumbai to Nizamabad; lead time on the written quote |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in SS 304/316, Class 150–2500, for food & agro piping in Nizamabad.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for water & utility lines in Nizamabad.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at water & utility units in Nizamabad.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Sanitary grade pipelines and food manufacturing lines
SS 304/316 Flanges, Buttweld Elbows

Municipal water distribution, water treatment & supply mains
Mild Steel Flanges, Concentric Reducers, Weld Bends
Route: Road freight from Mumbai to Nizamabad. The lead time and delivery schedule depend on the items and testing ordered and are stated on the written quote. Packing: crates or pallets with rust-preventive coating. Docs: invoice, packing list, EN 10204 3.1 MTC, test reports as ordered.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































A105 weld neck flanges for boiler and turbine steam, SS 304 or 316 slip-on flanges for juice and syrup, and Class 150 or PN10/PN16 flanges for cooling water. Send the rebuild list and we will quote item by item.
Yes. SS 304 and SS 316 slip-on and weld neck flanges to ASME B16.5 or EN 1092-1, with an EN 10204 3.1 MTC showing chemistry for each heat.
Yes. Measure the outside diameter, bolt circle and hole count on the pump flange, or send a photo with a tape across it, and we will identify the drilling and quote a matching flange.
As early as the rebuild list is fixed. Put the crushing start date on the RFQ; the quote states the lead time for each item, so you can see what will arrive in time.
Orders go by road from our Mumbai works. The lead time depends on the types, sizes and tests ordered, so it is stated item by item on the written quote for Nizamabad rather than as a fixed number of days.
No. Manufacturing and testing are at our ISO 9001:2015 works in Mumbai, and Nizamabad orders are sent from there by road. We have no office or warehouse in Nizamabad.
EN 10204 3.1 mill test certificates, with dimensional reports and hydro, UT or PMI reports as ordered. A 3.2 certificate can be arranged when the specification calls for it.