DIN 2501 legacy German flange standard reference: PN6, PN10, PN16, PN25, PN40 dimensions, bolt circles, mating compatibility with EN 1092-1. Get a written quote.
Although DIN 2501 was officially superseded by EN 1092-1 in the European Union, DIN flange callouts remain ubiquitous in existing plant maintenance specifications and international engineering drawings.
DIN 2501 is the legacy German Institute for Standardization standard for mating dimensions of steel pipe flanges in PN 6 through PN 40.
Plants built in Europe, the Middle East and India before the EN changeover still carry DIN numbers on their P&IDs, isometrics and spare-part lists. Maintenance teams therefore keep ordering "DIN 2633 PN16 weld neck" or "DIN 2576 PN10 slip-on" even though new projects are written to EN 1092-1.
We supply both: flanges marked to the legacy DIN reference for like-for-like replacement, or EN 1092-1 flanges with the matching type number when your specification has been updated. Tell us which marking and certificate wording you need and we will quote accordingly.
The PN number is the nominal pressure in bar at the reference temperature; the allowable pressure falls as temperature rises, so always check the pressure–temperature table for your material group.
PN 10 and PN 16 flanges share the same drilling up to DN 150. From DN 200 upward the bolt-hole count differs, so a PN 10 flange will not bolt to a PN 16 flange of the same size. When you replace a DIN flange with an EN 1092-1 flange, the bolt pattern matches but flange thickness and hub length may differ slightly, which matters where space or stud length is fixed.
Send the DIN number (or EN type), PN rating, DN size, facing, material grade and quantity. Common grades include C22.8 / P250GH carbon steel, 1.4301 / 1.4404 (304 / 316L) stainless and 1.4462 duplex. Every lot ships with an EN 10204 3.1 certificate; 3.2 with SGS, BV, TUV or DNV inspection is available on request. You get a written quote.
| Legacy DIN Standard | EN 1092-1 Equivalent |
|---|---|
| DIN 2527 | EN 1092-1 Type 05 (Blind Flange) |
| DIN 2573 / 2576 | EN 1092-1 Type 01 (Plate Slip-On) |
| DIN 2631 - 2635 | EN 1092-1 Type 11 (Weld Neck) |
| DIN 2566 | EN 1092-1 Type 13 (Threaded, hubbed) |
Under DIN 2501 Flange Standard, flange sealing face finishes are critical to leak-free joint integrity. Raised Face (RF) and Flat Face (FF) flanges are machined with a serrated concentric or serrated spiral finish having an average surface roughness between 125 µin and 250 µin (3.2 µm to 6.3 µm Ra), creating an ideal gripping surface for spiral wound or non-asbestos sheet gaskets.
For severe cyclic service or high-pressure hydrocarbons, Ring Type Joint (RTJ) grooves are precision CNC-machined to ASME B16.20 standards. Groove surfaces are finished to a mirror-smooth 63 µin (1.6 µm Ra) max roughness to ensure tight metallic sealing against octagonal or oval ring gaskets.
Compliance with DIN 2501 Flange Standard requires permanent identification legibly stamped on the outer rim of every flange: manufacturer trademark ("REMAX"), governing standard, nominal pipe size (NPS or DN), pressure rating class (e.g. 150#, 300#, 600#), ASTM/ASME material specification and grade (e.g. A105, F316L), schedule/wall thickness, and unique heat batch number.
All markings correlate 1:1 with the accompanying EN 10204 Type 3.1 Mill Test Certificate (MTC), providing verified traceability back to the initial steel melting ladle and forging ingot.
Order to the legacy DIN number for like-for-like replacement, or to the matching EN 1092-1 type. Sizes, classes and grades outside this list are quoted against your specification.
| DIN references | DIN 2527 blind, DIN 2573/2576 plate slip-on, DIN 2631-2635 weld neck, DIN 2566 threaded |
|---|---|
| Sizes | DN 10 to DN 1000 |
| PN ratings | PN 6, PN 10, PN 16, PN 25, PN 40 |
| Grades commonly ordered | C22.8 / P250GH carbon steel, 1.4301 (304), 1.4404 (316L), 1.4462 duplex |
| Documents | EN 10204 3.1 (3.2 on request) |
A: Yes. For DN 10 through DN 600, EN 1092-1 maintains identical bolt circle diameters, bolt hole counts, and pitch dimensions as legacy DIN 2501.
A: DIN 2501 has been withdrawn and replaced by EN 1092-1, but it is still widely quoted on drawings and spare-part lists for existing plants. Flanges can be supplied and marked to either reference.
A: Up to DN 150 the drilling is the same, so they will bolt together, but the joint is only rated to the lower PN. From DN 200 upward the number of bolt holes differs and they do not match.
A: Weld neck flanges are covered by DIN 2631 (PN 6), DIN 2632 (PN 10), DIN 2633 (PN 16), DIN 2634 (PN 25) and DIN 2635 (PN 40). The EN 1092-1 equivalent is Type 11.
Get dimensional data and a written quotation.