Flanges, butt-weld and forged fittings for Kanpur's aerospace & defence, chemical and power & boiler units, made at our ISO 9001:2015 works in Mumbai, dispatched from stock in 24–48 h and delivered in about 4 days, with EN 10204 3.1 certificates.
High-precision components for aviation & defence systems: Nickel Alloy Flanges, High-Pressure SW Fittings.
Ex-stock dispatch from Mumbai in 24–48 h, then road freight to Kanpur.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades held in stock.

Kanpur's buyers order piping hardware for concrete reasons: Ordnance factories cluster, leather & chemicals, Panki thermal, engineering. From our Mumbai works we supply weld neck flanges, socket weld flanges and forged fittings into Dada Nagar, Fazalganj & Panki industrial areas, in SS 316L, Inconel 625 & Monel on order — dimensioned to ASME B16.5/B16.11 and certified to EN 10204 3.1.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Kanpur, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Kanpur's demand for flanges and fittings comes mainly from Ordnance factories cluster, leather & chemicals, Panki thermal, engineering. Aerospace, defence and research establishments order nickel-alloy and stainless high-pressure fittings and flanges with full traceability and inspection records. Process and chemical units typically specify stainless 316L slip-on and weld neck flanges and Sch 10S/40S butt-weld fittings, with duplex items for aggressive media. Power stations and boiler houses buy A105 and alloy F11/F22/F91 weld neck flanges and fittings for steam, feedwater and blow-down lines, with IBR documents where the line falls under the Indian Boiler Regulations.
Orders for Kanpur leave our Mumbai stock within 24–48 hours and travel by road on NH44+NH19 via Jhansi (~1,320 km), so material is usually on site in about 4 days. Custom forgings and non-stock sizes take 7–15 working days. To quote quickly we need the size (NPS or DN), pressure class, facing (RF, FF or RTJ), material grade and the schedule of the mating pipe.
Every lot ships with an EN 10204 3.1 mill test certificate, and heat numbers are marked on each piece so they can be traced back to it. Alloy and stainless items can be PMI-checked before dispatch, and inspection by your own or a third-party agency is welcome at our works. Steam-line items for boiler work can be supplied with IBR documents. We use the same route to serve Varanasi, Agra, Ghaziabad and Lucknow, so mixed orders for plants in the region can be planned together.
| Service | Flanges & fittings usually specified |
|---|---|
| High-pressure test & fluid lines | 6000# / 9000# forged fittings in SS 316L or nickel alloy |
| Corrosive process lines | SS 316L / 304L weld neck and slip-on flanges; B16.9 fittings in Sch 10S–80S |
| Main steam & feedwater | A182 F11 / F22 / F91 weld neck flanges, Class 600–2500, IBR where applicable |
| Special-material flanges | Inconel 600 / 625 and Monel flanges with full traceability |
| Chloride-bearing service | Duplex F51 / super duplex F53 flanges and fittings |
| Auxiliary steam & drains | A105 flanges with 3000# / 6000# socket-weld fittings |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in SS 316L, Inconel 625 & Monel on order, Class 150–2500, for aerospace & defence piping in Kanpur.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for chemical lines in Kanpur.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at power & boiler units in Kanpur.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

High-precision components for aviation & defence systems
Nickel Alloy Flanges, High-Pressure SW Fittings

Highly corrosive acid loops & polymer synthesis lines
Stainless Steel 316L Flanges, Custom Forged Fittings

Superheated steam lines, IBR boiler circuits & exhaust pipes
Alloy Steel P91/F22 Flanges, IBR Fittings
Route: NH44+NH19 via Jhansi (~1,320 km). Ex-stock dispatch 24–48 h from Mumbai; road freight ≈ 4 days to Kanpur. Custom forgings: 7–15 working days. Packing: seaworthy crates/pallets with rust-preventive coating. Docs: invoice, packing list, 3.1 MTC, test reports, IBR documentation where applicable.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































We deliver Weld Neck Flanges, Socket Weld Flanges, Forged Fittings and SW Elbows to Kanpur in SS 316L, Inconel 625 & Monel on order, dimensioned to ASME B16.5, B16.47 and B16.11. Demand here comes mainly from aerospace & defence and engineering & auto — including units around Dada Nagar — and every lot ships with EN 10204 3.1 certification.
Yes. Vendors serving Ordnance factories cluster order SS 316L as standard, with Inconel 625 and Monel 400 against confirmed orders — lead time 15–25 working days. Every exotic-alloy lot is 100% PMI-verified with EN 10204 3.1 MTC and full heat traceability.
Honestly: ex-stock items dispatch from our Mumbai warehouse within 24–48 hours and reach Kanpur in roughly 4 days by road (NH44+NH19 via Jhansi (~1,320 km)). Custom forgings add 7–15 working days of production. We confirm a dated schedule with every quotation rather than promising blanket next-day delivery.
We deliver door-to-site across Kanpur, including Dada Nagar, Fazalganj and Panki industrial areas, and to nearby Varanasi, Agra, Ghaziabad and Lucknow. Goods leave our Mumbai stock within 24–48 hours and travel by road on NH44+NH19 via Jhansi (~1,320 km), normally arriving in about 4 days.
No — and we say so plainly. Manufacturing, stock and testing are at our ISO 9001:2015 facility in Mumbai; Kanpur is served through scheduled road dispatches with full documentation. Buyers are welcome to audit the Mumbai works in person or by video inspection before ordering.
Every Kanpur dispatch includes EN 10204 3.1 mill test certificates, dimensional reports and hydro/NDT test reports as ordered, IBR documentation for steam-service items. 100% PMI is standard on alloy and stainless lots.
We keep MOQs low for the Kanpur corridor — small lots are clubbed with our scheduled dispatches on this route, so a single-item trial order is workable. Project-quantity rates apply from roughly 100 pieces or 500 kg per grade.