Flanges, butt-weld and forged fittings for Lucknow's aerospace & defence, water & utility and food & agro units, made at our ISO 9001:2015 works in Mumbai, dispatched from stock in 24–48 h and delivered in about 4 days, with EN 10204 3.1 certificates.
High-precision components for aviation & defence systems: Nickel Alloy Flanges, High-Pressure SW Fittings.
Ex-stock dispatch from Mumbai in 24–48 h, then road freight to Lucknow.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades held in stock.

Around Talkatora, Amausi & Chinhat industrial areas, procurement runs on HAL Lucknow accessories division, state infra & utilities, food processing. We serve this demand from Mumbai with weld neck flanges, socket weld flanges and forged fittings in SS 316L, Inconel 625 & Monel on order, built to ASME B16.5/B16.11 and documented with EN 10204 3.1 certificates.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Lucknow, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Lucknow's demand for flanges and fittings comes mainly from HAL Lucknow accessories division, state infra & utilities, food processing. Aerospace, defence and research establishments order nickel-alloy and stainless high-pressure fittings and flanges with full traceability and inspection records. Utility and infrastructure projects mainly need mild steel flanges in PN10/PN16 or Class 150, reducers and long-radius bends for distribution mains. Food, sugar and agro-processing units order SS 304/316 flanges and butt-weld fittings for juice, syrup, oil and process lines, plus carbon steel flanges for boiler and utility piping.
Orders for Lucknow leave our Mumbai stock within 24–48 hours and travel by road on NH19+NH30 via Kanpur, so material is usually on site in about 4 days. Custom forgings and non-stock sizes take 7–15 working days. To quote quickly we need the size (NPS or DN), pressure class, facing (RF, FF or RTJ), material grade and the schedule of the mating pipe.
Every lot ships with an EN 10204 3.1 mill test certificate, and heat numbers are marked on each piece so they can be traced back to it. Alloy and stainless items can be PMI-checked before dispatch, and inspection by your own or a third-party agency is welcome at our works. We use the same route to serve Varanasi, Agra, Ghaziabad and Kanpur, so mixed orders for plants in the region can be planned together.
| Service | Flanges & fittings usually specified |
|---|---|
| High-pressure test & fluid lines | 6000# / 9000# forged fittings in SS 316L or nickel alloy |
| Pumping & distribution mains | MS / A105 slip-on and plate flanges, PN10 / PN16 or Class 150 |
| Product & CIP lines | SS 304 / 316 flanges and butt-weld elbows, reducers and tees |
| Special-material flanges | Inconel 600 / 625 and Monel flanges with full traceability |
| Treatment plant piping | SS 304 / 316 flanges, concentric reducers and weld bends |
| Boiler & steam headers | A105 weld neck flanges with A234 WPB fittings |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in SS 316L, Inconel 625 & Monel on order, Class 150–2500, for aerospace & defence piping in Lucknow.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for water & utility lines in Lucknow.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at food & agro units in Lucknow.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

High-precision components for aviation & defence systems
Nickel Alloy Flanges, High-Pressure SW Fittings

Municipal water distribution, water treatment & supply mains
Mild Steel Flanges, Concentric Reducers, Weld Bends

Sanitary grade pipelines and food manufacturing lines
SS 304/316 Flanges, Buttweld Elbows
Route: NH19+NH30 via Kanpur. Ex-stock dispatch 24–48 h from Mumbai; road freight ≈ 4 days to Lucknow. Custom forgings: 7–15 working days. Packing: seaworthy crates/pallets with rust-preventive coating. Docs: invoice, packing list, 3.1 MTC, test reports.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































We deliver Weld Neck Flanges, Socket Weld Flanges, Forged Fittings and SW Elbows to Lucknow in SS 316L, Inconel 625 & Monel on order, dimensioned to ASME B16.5, B16.47 and B16.11. Demand here comes mainly from aerospace & defence and engineering & auto — including units around Talkatora — and every lot ships with EN 10204 3.1 certification.
Yes. Vendors serving HAL Lucknow accessories division order SS 316L as standard, with Inconel 625 and Monel 400 against confirmed orders — lead time 15–25 working days. Every exotic-alloy lot is 100% PMI-verified with EN 10204 3.1 MTC and full heat traceability.
Honestly: ex-stock items dispatch from our Mumbai warehouse within 24–48 hours and reach Lucknow in roughly 4 days by road (NH19+NH30 via Kanpur). Custom forgings add 7–15 working days of production. We confirm a dated schedule with every quotation rather than promising blanket next-day delivery.
We deliver door-to-site across Lucknow, including Talkatora, Amausi and Chinhat industrial areas, and to nearby Varanasi, Agra, Ghaziabad and Kanpur. Goods leave our Mumbai stock within 24–48 hours and travel by road on NH19+NH30 via Kanpur, normally arriving in about 4 days.
No — and we say so plainly. Manufacturing, stock and testing are at our ISO 9001:2015 facility in Mumbai; Lucknow is served through scheduled road dispatches with full documentation. Buyers are welcome to audit the Mumbai works in person or by video inspection before ordering.
Every Lucknow dispatch includes EN 10204 3.1 mill test certificates, dimensional reports and hydro/NDT test reports as ordered. 100% PMI is standard on alloy and stainless lots.
We keep MOQs low for the Lucknow corridor — small lots are clubbed with our scheduled dispatches on this route, so a single-item trial order is workable. Project-quantity rates apply from roughly 100 pieces or 500 kg per grade.
Direct factory pricing. No public phone calls needed.