Flanges, butt-weld and forged fittings for Varanasi's railway & fabrication, textile and food & agro units, made at our ISO 9001:2015 works in Mumbai, dispatched from stock in 24–48 h and delivered in about 4 days, with EN 10204 3.1 certificates.
Locomotive structural assemblies & heavy engineering loops: Forged Carbon Steel Flanges, Heavy Wear Plates.
Ex-stock dispatch from Mumbai in 24–48 h, then road freight to Varanasi.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades held in stock.

Around Ramnagar & Chandpur industrial estates, BLW, procurement runs on Banaras Locomotive Works, textiles (silk), food processing, gas grid works. We serve this demand from Mumbai with forged fittings, slip on flanges and butt weld elbows in A105, SS 304, built to ASME B16.5/B16.11 and documented with EN 10204 3.1 certificates.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Varanasi, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Varanasi's demand for flanges and fittings comes mainly from Banaras Locomotive Works, textiles (silk), food processing, gas grid works. Railway workshops and heavy fabricators order forged carbon steel flanges, heavy-wall fittings and wear plate for locomotive, coach and structural work. Spinning, dyeing and finishing units need stainless slip-on flanges, threaded couplings and steam-line fittings, mostly in small and medium bore. Food, sugar and agro-processing units order SS 304/316 flanges and butt-weld fittings for juice, syrup, oil and process lines, plus carbon steel flanges for boiler and utility piping.
Orders for Varanasi leave our Mumbai stock within 24–48 hours and travel by road on NH53+NH19 via Nagpur (~1,500 km), so material is usually on site in about 4 days. Custom forgings and non-stock sizes take 7–15 working days. To quote quickly we need the size (NPS or DN), pressure class, facing (RF, FF or RTJ), material grade and the schedule of the mating pipe.
Every lot ships with an EN 10204 3.1 mill test certificate, and heat numbers are marked on each piece so they can be traced back to it. Alloy and stainless items can be PMI-checked before dispatch, and inspection by your own or a third-party agency is welcome at our works. We use the same route to serve Agra, Ghaziabad, Lucknow and Kanpur, so mixed orders for plants in the region can be planned together.
| Service | Flanges & fittings usually specified |
|---|---|
| Air-brake & hydraulic lines | A105 forged fittings and threaded couplings |
| Dye-kitchen & effluent lines | SS 304 / 316 slip-on flanges and socket-weld fittings |
| Product & CIP lines | SS 304 / 316 flanges and butt-weld elbows, reducers and tees |
| Structural & heavy fabrication | Forged carbon steel flanges and wear-resistant plate |
| Steam headers | A105 flanges and 3000# forged fittings |
| Boiler & steam headers | A105 weld neck flanges with A234 WPB fittings |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in A105, SS 304, Class 150–2500, for railway & fabrication piping in Varanasi.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for textile lines in Varanasi.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at food & agro units in Varanasi.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Locomotive structural assemblies & heavy engineering loops
Forged Carbon Steel Flanges, Heavy Wear Plates

Dyeing tank utilities, steam headers & waste lines
SS 304 Flanges, Socket Weld Couplings

Sanitary grade pipelines and food manufacturing lines
SS 304/316 Flanges, Buttweld Elbows
Route: NH53+NH19 via Nagpur (~1,500 km). Ex-stock dispatch 24–48 h from Mumbai; road freight ≈ 4 days to Varanasi. Custom forgings: 7–15 working days. Packing: seaworthy crates/pallets with rust-preventive coating. Docs: invoice, packing list, 3.1 MTC, test reports.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































We deliver Forged Fittings, Slip On Flanges, Butt Weld Elbows and Threaded Flanges to Varanasi in A105, SS 304, dimensioned to ASME B16.5, B16.47 and B16.11. Demand here comes mainly from railways & heavy fabrication and textiles & process — including units around Ramnagar & Chandpur industrial estates — and every lot ships with EN 10204 3.1 certification.
Yes. Railway workshops such as Banaras Locomotive Works use forged fittings, slip-on flanges and butt-weld elbows for compressed air, steam and hydraulic services. We supply A105 and SS 304 items with 3.1 MTCs in workshop-friendly small lots.
Honestly: ex-stock items dispatch from our Mumbai warehouse within 24–48 hours and reach Varanasi in roughly 4 days by road (NH53+NH19 via Nagpur (~1,500 km)). Custom forgings add 7–15 working days of production. We confirm a dated schedule with every quotation rather than promising blanket next-day delivery.
We deliver door-to-site across Varanasi, including Ramnagar, Chandpur industrial estates and BLW, and to nearby Agra, Ghaziabad, Lucknow and Kanpur. Goods leave our Mumbai stock within 24–48 hours and travel by road on NH53+NH19 via Nagpur (~1,500 km), normally arriving in about 4 days.
No — and we say so plainly. Manufacturing, stock and testing are at our ISO 9001:2015 facility in Mumbai; Varanasi is served through scheduled road dispatches with full documentation. Buyers are welcome to audit the Mumbai works in person or by video inspection before ordering.
Every Varanasi dispatch includes EN 10204 3.1 mill test certificates, dimensional reports and hydro/NDT test reports as ordered. 100% PMI is standard on alloy and stainless lots.
We keep MOQs low for the Varanasi corridor — small lots are clubbed with our scheduled dispatches on this route, so a single-item trial order is workable. Project-quantity rates apply from roughly 100 pieces or 500 kg per grade.