Flanges, butt-weld and forged fittings for Nongpoh's steel & metals and cement & mining units, made at our ISO 9001:2015 works in Mumbai, dispatched from stock in 24–48 h and delivered in about 7 days, with EN 10204 3.1 certificates.
Blast furnace utilities, slag lines & abrasion zones: A105 Forged Flanges, Hardox Wear Liners.
Ex-stock dispatch from Mumbai in 24–48 h, then road freight to Nongpoh.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades held in stock.

Nongpoh's buyers order piping hardware for concrete reasons: Ferro alloys, cement & steel re-rolling units at Byrnihat. From our Mumbai works we supply blind flanges, slip on flanges and butt weld elbows into Byrnihat industrial area (EPIP), in A105, A350 LF2, SS 304 — dimensioned to ASME B16.5/B16.11 and certified to EN 10204 3.1.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Nongpoh, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Nongpoh's demand for flanges and fittings comes mainly from Ferro alloys, cement & steel re-rolling units at Byrnihat. Steel and metals plants order heavy A105 flanges, blind flanges and wear-resistant plate for furnace gas, cooling water, slag and oxygen lines. Mining and cement plants mostly buy A105 flanges, long-radius elbows for abrasive transport and Hardox-type plate for chutes and liners.
Orders for Nongpoh leave our Mumbai stock within 24–48 hours and travel by road on NH6 via Guwahati (~60 km from Guwahati), so material is usually on site in about 7 days. Custom forgings and non-stock sizes take 7–15 working days. To quote quickly we need the size (NPS or DN), pressure class, facing (RF, FF or RTJ), material grade and the schedule of the mating pipe.
Every lot ships with an EN 10204 3.1 mill test certificate, and heat numbers are marked on each piece so they can be traced back to it. Alloy and stainless items can be PMI-checked before dispatch, and inspection by your own or a third-party agency is welcome at our works. We use the same route to serve Cherrapunji, Shillong, Tura and Williamnagar, so mixed orders for plants in the region can be planned together.
| Service | Flanges & fittings usually specified |
|---|---|
| Cooling water & gas mains | A105 slip-on and plate flanges, large bore to ASME B16.47 |
| Slurry & conveying lines | Thick-wall carbon steel flanges and long-radius elbows |
| Abrasive & slag handling | Wear-resistant plate (Hardox-type) and heavy-wall fittings |
| Chutes, liners & hoppers | Wear-resistant plate (Hardox-type), cut to size |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in A105, A350 LF2, SS 304, Class 150–2500, for steel & metals piping in Nongpoh.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for cement & mining lines in Nongpoh.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at cement & mining units in Nongpoh.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Blast furnace utilities, slag lines & abrasion zones
A105 Forged Flanges, Hardox Wear Liners

Abrasive material handling & excavation slurry loops
Hardox Wear Plates, High-Thickness Flanges
Route: NH6 via Guwahati (~60 km from Guwahati). Ex-stock dispatch 24–48 h from Mumbai; road freight ≈ 7 days to Nongpoh. Custom forgings: 7–15 working days. Packing: seaworthy crates/pallets with rust-preventive coating. Docs: invoice, packing list, 3.1 MTC, test reports.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































We deliver Blind Flanges, Slip On Flanges, Butt Weld Elbows and Hardox Plates to Nongpoh in A105, A350 LF2, SS 304, dimensioned to ASME B16.5, B16.47 and B16.11. Demand here comes mainly from steel & metals and cement & mining — including units around Byrnihat industrial area (EPIP) — and every lot ships with EN 10204 3.1 certification.
For plants like Ferro alloys we recommend A105 slip-on and blind flanges for water, air and steam utilities, with Hardox 400/450 plate for abrasion zones such as chutes and liners. Every lot ships with EN 10204 3.1 MTC and hardness certificates where wear plate is involved.
Honestly: ex-stock items dispatch from our Mumbai warehouse within 24–48 hours and reach Nongpoh in roughly 7 days by road (NH6 via Guwahati (~60 km from Guwahati)). Custom forgings add 7–15 working days of production. We confirm a dated schedule with every quotation rather than promising blanket next-day delivery.
We deliver door-to-site across Nongpoh, including Byrnihat industrial area (EPIP), and to nearby Cherrapunji, Shillong, Tura and Williamnagar. Goods leave our Mumbai stock within 24–48 hours and travel by road on NH6 via Guwahati (~60 km from Guwahati), normally arriving in about 7 days.
No — and we say so plainly. Manufacturing, stock and testing are at our ISO 9001:2015 facility in Mumbai; Nongpoh is served through scheduled road dispatches with full documentation. Buyers are welcome to audit the Mumbai works in person or by video inspection before ordering.
Every Nongpoh dispatch includes EN 10204 3.1 mill test certificates, dimensional reports and hydro/NDT test reports as ordered. 100% PMI is standard on alloy and stainless lots.
We keep MOQs low for the Nongpoh corridor — small lots are clubbed with our scheduled dispatches on this route, so a single-item trial order is workable. Project-quantity rates apply from roughly 100 pieces or 500 kg per grade.