Slip-on, threaded and blind flanges for Sohra's water supply schemes and the limestone sites of East Khasi Hills, made at our ISO 9001:2015 works in Mumbai and sent by road with EN 10204 3.1 certificates. The lead time is stated on your written quote.
Abrasive material handling & excavation slurry loops: Hardox Wear Plates, High-Thickness Flanges.
Lead time for Cherrapunji is stated on your written quote.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades supplied with an EN 10204 3.1 MTC.

Cherrapunji (Sohra) is in East Khasi Hills. Its flange buyers are the water-supply schemes that serve the town and the limestone mining sites around it. Remax Forge supplies threaded flanges for water supply lines, blind flanges for water works and blind flanges for mines from our Mumbai works with an EN 10204 3.1 MTC. See also Shillong and Nongpoh.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Cherrapunji, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
The Greater Sohra (Cherrapunjee) Water Supply Scheme was sanctioned under NESIDS and inaugurated in July 2021. Its reported cost is Rs 24.08 crore, and it serves Sohra town and 12 habitations, about 22,943 people. It draws from the Wah Lyngksiar stream and a spring, with a clean-water reservoir, 13 zonal tanks, a treatment plant and distribution pipelines. The old Mawmluh-Cherra cement plant has closed, while limestone mining leases continue in East Khasi Hills.
A gravity scheme with a treatment plant and zonal tanks uses slip-on flanges in PN10/PN16 at the plant and tanks, threaded galvanised flanges on smaller lines, and blind flanges on washouts and future branches. Limestone mining sites need carbon-steel flanges on dewatering and wash-water lines.
Sohra has some of the heaviest rainfall in India, so external corrosion matters. Ask for hot-dip galvanising or a painting system on the RFQ for flanges that will be outdoors.
| Service | Flanges & fittings usually specified |
|---|---|
| Treatment plant and zonal tanks | Slip-on, EN 1092-1 PN10/PN16 or Class 150, galvanised |
| Smaller distribution lines | Threaded galvanised flanges, BSP, Class 150 |
| Washouts and future branches | Blind flanges in the line rating |
| Mine dewatering and wash water | Weld neck or slip-on, Class 150/300, A105 |
What we quote most often for Sohra town and 12 habitations, East Khasi Hills. Sizes, classes and grades below are those listed on our flange product pages; anything else is quoted against your specification.
| Types we quote | threaded flanges for water supply lines, blind flanges for water works, blind flanges for mines, plus blinds and spectacle blinds in the same class |
|---|---|
| Dimension standards | ASME B16.5 (NPS ½"–24"), ASME B16.47 Series A/B (NPS 26"–60"), EN 1092-1 (PN6–PN400) |
| Rating range | Class 150, 300, 400, 600, 900, 1500, 2500; PN6 to PN400 |
| Grades for Cherrapunji service | Hot-dip galvanised A105 for outdoor water lines; SS 304 for treated water if specified; A105 for mine piping |
| Face options | RF, FF, RTJ, tongue & groove, male & female |
| Certificates | EN 10204 3.1 MTC with heat number on each piece; 3.2 on request |
| Dispatch | By road from Mumbai to Cherrapunji; lead time on the written quote |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in A105, Hardox 400/450, Class 150–2500, for cement & mining piping in Cherrapunji.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for water & utility lines in Cherrapunji.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at water & utility units in Cherrapunji.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Abrasive material handling & excavation slurry loops
Hardox Wear Plates, High-Thickness Flanges

Municipal water distribution, water treatment & supply mains
Mild Steel Flanges, Concentric Reducers, Weld Bends
Route: Road freight from Mumbai to Cherrapunji. The lead time and delivery schedule depend on the items and testing ordered and are stated on the written quote. Packing: crates or pallets with rust-preventive coating. Docs: invoice, packing list, EN 10204 3.1 MTC, test reports as ordered.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































Slip-on flanges in PN10/PN16 or Class 150 at the treatment plant and tanks, threaded galvanised flanges on smaller lines and blinds on washouts. Send the BOQ and we will quote each item.
Hot-dip galvanising after machining, or a specified paint system. State the coating on the RFQ so it is included in the price and the inspection plan.
Yes. A105 weld neck or slip-on flanges in Class 150/300 with blinds for isolation, matched to the pipe schedule.
Yes. Measure the outside diameter, bolt circle and number of holes, or send a photo, and we will identify the drilling and quote a matching flange.
Orders go by road from our Mumbai works. The lead time depends on the types, sizes and tests ordered, so it is stated item by item on the written quote for Cherrapunji rather than as a fixed number of days.
No. Manufacturing and testing are at our ISO 9001:2015 works in Mumbai, and Cherrapunji orders are sent from there by road. We have no office or warehouse in Cherrapunji.
EN 10204 3.1 mill test certificates, with dimensional reports and hydro, UT or PMI reports as ordered. A 3.2 certificate can be arranged when the specification calls for it.