Threaded, slip-on and blind flanges for water supply, public works and mineral sites in East Garo Hills, made at our ISO 9001:2015 works in Mumbai and sent by road with EN 10204 3.1 certificates. The lead time is stated on your written quote.
Abrasive material handling & excavation slurry loops: Hardox Wear Plates, High-Thickness Flanges.
Lead time for Williamnagar is stated on your written quote.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades supplied with an EN 10204 3.1 MTC.

Williamnagar is the headquarters of East Garo Hills district, and its flange buyers are water-supply contractors, public works and mineral sites. Remax Forge supplies threaded flanges for water supply lines, slip-on (SO) flanges and blind flanges for mines from our Mumbai works with an EN 10204 3.1 MTC. See also our Tura and Shillong pages.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Williamnagar, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Williamnagar stands on the upper Simsang river and has been the headquarters of East Garo Hills since the district was created in 1976. The town was originally called Simsanggre. The Ministry of MSME's district profile describes East Garo Hills as rich in coal, limestone and clay, and the District Commerce and Industries Centre is in Williamnagar.
Water supply drawn from streams and the Simsang, and public works, use slip-on flanges in Class 150 or PN10/PN16 on pumps and tanks, threaded flanges on galvanised pipe, and blinds for future connections. Mineral sites need abrasion-tolerant carbon-steel flanges on slurry and dewatering lines, with blinds for isolation.
Most orders from the district are small and mixed. Put every item on one RFQ, with the thread type for threaded flanges (NPT or BSP) and the drilling of any pump you are connecting to, and we will quote the whole lot for one dispatch.
| Service | Flanges & fittings usually specified |
|---|---|
| Pump and tank connections | Slip-on, Class 150 or EN 1092-1 PN10/PN16, galvanised |
| GI pipe lines | Threaded flanges, NPT or BSP, Class 150, galvanised |
| Dewatering and slurry | Weld neck or slip-on, Class 150/300, A105, with blinds |
| Future branches | Blind flanges in the line rating |
What we quote most often for Williamnagar, East Garo Hills. Sizes, classes and grades below are those listed on our flange product pages; anything else is quoted against your specification.
| Types we quote | threaded flanges for water supply lines, slip-on (SO) flanges, blind flanges for mines, plus blinds and spectacle blinds in the same class |
|---|---|
| Dimension standards | ASME B16.5 (NPS ½"–24"), ASME B16.47 Series A/B (NPS 26"–60"), EN 1092-1 (PN6–PN400) |
| Rating range | Class 150, 300, 400, 600, 900, 1500, 2500; PN6 to PN400 |
| Grades for Williamnagar service | A105 carbon steel, galvanised for water; SS 304 for drinking water when specified |
| Face options | RF, FF, RTJ, tongue & groove, male & female |
| Certificates | EN 10204 3.1 MTC with heat number on each piece; 3.2 on request |
| Dispatch | By road from Mumbai to Williamnagar; lead time on the written quote |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in A105, Hardox 400/450, Class 150–2500, for cement & mining piping in Williamnagar.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for food & agro lines in Williamnagar.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at food & agro units in Williamnagar.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Abrasive material handling & excavation slurry loops
Hardox Wear Plates, High-Thickness Flanges

Sanitary grade pipelines and food manufacturing lines
SS 304/316 Flanges, Buttweld Elbows
Route: Road freight from Mumbai to Williamnagar. The lead time and delivery schedule depend on the items and testing ordered and are stated on the written quote. Packing: crates or pallets with rust-preventive coating. Docs: invoice, packing list, EN 10204 3.1 MTC, test reports as ordered.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































Slip-on flanges in Class 150 or PN10/PN16 on pumps and tanks, threaded galvanised flanges on GI pipe, and blind flanges for future branches. Send the BOQ and we will quote each item.
A105 weld neck or slip-on flanges in Class 150/300, with blinds for isolation. For abrasive slurry, state the slurry and pipe schedule, as a heavier schedule and weld neck flanges last longer.
Yes. Specify which one, because BSP and NPT threads do not mate. Most GI pipe in India is threaded BSP.
Yes. Put all items on one RFQ with the delivery point, and the quote covers them as a single dispatch from Mumbai.
Orders go by road from our Mumbai works. The lead time depends on the types, sizes and tests ordered, so it is stated item by item on the written quote for Williamnagar rather than as a fixed number of days.
No. Manufacturing and testing are at our ISO 9001:2015 works in Mumbai, and Williamnagar orders are sent from there by road. We have no office or warehouse in Williamnagar.
EN 10204 3.1 mill test certificates, with dimensional reports and hydro, UT or PMI reports as ordered. A 3.2 certificate can be arranged when the specification calls for it.