Lap joint backing flanges for stainless steel water piping in water treatment, desalination, pumping stations and process water systems. A carbon steel backing flange is paired with a stainless or duplex stub end, so the wetted material stays corrosion-resistant while the flange costs less.
Remax Forge & Fittings is an ISO 9001:2015 certified manufacturer of forged flanges based in Mumbai, India. We deliver custom-engineered, fully-traceable forged piping components designed to meet strict industrial specifications for lap joint flange for water infrastructure industry across global infrastructure, chemical processing, oil & gas, and power generation projects.
Every flange stamped with heat number, pressure rating, grade & size.
Spectro PMI analysis, ultrasonic testing, hydrostatic testing & MTC 3.1/3.2.
Price, production time and freight terms confirmed in writing for your exact list.
Treated water, brine and chemical-dosing lines are often run in stainless steel 316L or duplex to resist chlorides. Making every flange from the same alloy is expensive, especially on large diameters. With a lap joint, only the stub end welded to the pipe is alloy. The loose backing flange, which never touches the water, can be carbon steel with a protective coating.
The rotating flange also makes it easy to line up bolt holes on long prefabricated spools, pump connections and valve stations, and to dismantle lines for maintenance.
For seawater intake, brine and high-pressure reverse osmosis piping, chloride pitting resistance matters more than cost. Duplex (ASTM A182 F51) and super duplex (F53, F55) are commonly specified for these lines, either as stub ends with a lap joint or as solid flanges, depending on pressure and the designer's specification. Where a carbon steel backing flange is used on these lines, its coating has to survive a wet, salty plant atmosphere. Include the coating system and the dry film thickness in the RFQ.
| Line | Stub end / pipe | Backing flange |
|---|---|---|
| Treated and product water | A403 WP316L, Sch 10S | ASTM A105, coated |
| Chemical dosing | A403 WP316L | ASTM A105, coated, or A182 F304 |
| Seawater intake and brine | Duplex / super duplex | ASTM A105, coated |
| Material Category | Grades / Specifications |
|---|---|
| Stainless Steel Lap Joint Flange for Water Infrastructure Industry | ASTM/ASME A/SA182: F304, F304L, F316, F316L, F316H, F316Ti, F321, F347; Cast: CF3, CF3M, CF8, CF8M; DIN: 1.4301, 1.4306, 1.4401, 1.4404, 1.4408, 1.4409 |
| Duplex Steel Lap Joint Flange for Water Infrastructure Industry | UNS S31803/S32205 — ASTM A182 Gr F51, F52, F53, F54, F55, F57, F59, F60, F61 |
| Super Duplex Lap Joint Flange for Water Infrastructure Industry | UNS S32750/S32760 — ASTM A182 Gr F53, F55; Zeron 100 |
| Carbon Steel Lap Joint Flange for Water Infrastructure Industry | ASTM/ASME A/SA105, A105N, A216-WCB; A350 LF2 (low temp); A694 F52/F56/F60/F65/F70/F80 (high yield); DIN 1.0460, 1.0402, 1.0619 |
| Alloy Steel Lap Joint Flange for Water Infrastructure Industry | ASTM A182/ASME SA182: F5, F9, F11, F12, F22, F91 (all P-grades for high temp service) |
| Nickel Alloy Lap Joint Flange for Water Infrastructure Industry | Inconel 600, 601, 625, 718, 690, X750 (ASTM B564/ASME SB564); Incoloy 800, 800H, 800HT, 825, 925 |
| Hastelloy Lap Joint Flange for Water Infrastructure Industry | C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X (ASTM B564) |
| Monel Lap Joint Flange for Water Infrastructure Industry | Monel 400 (UNS N04400), Monel K500 (UNS N05500) — ASTM B564 |
| Pure Nickel Lap Joint Flange for Water Infrastructure Industry | Nickel 200, 201, 205, 205LC — ASTM B564/ASME SB564 |
| Copper Nickel Lap Joint Flange for Water Infrastructure Industry | CuNi 90/10 (C70600), CuNi 70/30 (C71500), UNS C71640 — ASTM/ASME SB 61/62/151/152 |
| Titanium Lap Joint Flange for Water Infrastructure Industry | Gr.1, Gr.2, Gr.4, Gr.5, Gr.7 — ASTM B381/ASME SB381; R50250/R50400/R50550/R50700/R52400/R53400/R56400 |
| Aluminium Lap Joint Flange for Water Infrastructure Industry | 5052, 6061, 6063, 2017, 7075 |
| Brass Lap Joint Flange for Water Infrastructure Industry | 3602, 2604, H59, H62 |
| Special Alloy Lap Joint Flange for Water Infrastructure Industry | Alloy 20 (ASTM B462 SB462 — Carpenter 20Cb-3); SMO 254/6Mo (UNS S31254, DIN 1.4547); Al6XN; AISI 4130; AISI 4140; Nimonic 75/80A/90; Gunmetal; Cast Iron |
| Standard / Spec | Scope / Application Details |
|---|---|
| 🇺🇸ANSI/ASME B16.5 | NPS ½" to 24" — the primary standard for most flanges |
| 🇺🇸ASME B16.47 Series A (MSS SP-44) | NPS 26" to 60" — large diameter |
| 🇺🇸ASME B16.47 Series B (API 605) | NPS 26" to 60" — large diameter (lighter) |
| 🇺🇸ASME B16.36 | Orifice flanges |
| 🇺🇸ASME B16.48 | Line blinds & spectacle blinds |
| 🇪🇺DIN 2501 / EN 1092-1 | European metric standard — PN ratings |
| 🇯🇵JIS B2220 | Japanese Industrial Standard |
| 🇬🇧BS 4504 / BS 10 Table D/E/F/H | British Standard |
| 🇺🇸MSS SP-44 | Large diameter steel pipeline flanges |
| 🇺🇸API 6A | Wellhead and Christmas tree equipment |
| 🇺🇸API 605 | Large diameter carbon steel flanges |
| 🇺🇸AWWA C207 | Water works flanges |
| 🇷🇺GOST 12820 / 12821 | Russian/CIS standard |
| 🇦🇺AS 2129 / AS 4087 / AS/NZS 4331.1 | Australian standard |
| 🇰🇷KS B1503 | Korean standard |
| 🌐ISO 7005-1 / ISO 9624 | International standard |
| 🇺🇸SAE J518 | Hydraulic flanged tube fittings |
| 🇨🇳GB Standard | Chinese national standard |
Most common. A raised circular ring that concentrates pressure on a smaller area to compress the gasket. Height: 1/16" for Class 150/300; 1/4" for Class 400 and above.
No raised portion; entire flange face is in the same plane. Used when mating against cast iron or non-metallic flanges to avoid cracking on bolt tightening.
Oval or octagonal groove machined into the face; a metal ring gasket seats in the groove. Used in high-pressure, high-temperature critical service (refineries, oil fields).
One flange has a raised ring (tongue); the other a matching groove. Provides excellent alignment and a confined gasket. Used in pumps and valve bonnets.
Similar to T&G but the female face is flat and the male face raised. Used in heat exchangers, pressure vessels, and high-integrity process joints.
Same operating principle as the standard Male & Female flange, scaled up with larger step contact surfaces for specialized heavy industrial equipment.
Each flange pressure tested at 1.5x working pressure per ASME code requirements.
Non-destructive testing to detect internal sub-surface cracks, inclusions and forging defects.
100% radiography available; mandatory for critical Class 900+ high pressure services.
Spectrometer validation to verify alloy chemistry precisely matches the Mill Test Certificate.
Detects micro surface cracking and porosity on critical machined seating surfaces.
For ferromagnetic alloys; flags surface and near-surface structural discontinuities.
Verifies correct heat treatment structure and ensures mechanical properties are hit.
In-house lab chemical checks of billets before forging process begins.
Crucial for low-temperature applications to verify ductility (e.g. A350 LF2, LTCS).
Verifies sour-gas / H2S environment service capability (NACE MR0175 / MR0103).
Provided as per EN 10204 3.1 detailing chemical & mechanical analysis.
Independent third-party inspection validation (available upon request).
Certified suitability for sour gas/H2S environments.
Provides 100% trace origin tracking from steel billet to finished flange.
All critical tolerances checked and certified against CAD designs.
HTR and PWHT thermal chart records included where requested.
Pressure log documentation verifying weld integrity.
Bureau Veritas, SGS, Lloyds, DNV, TUV inspection options.
Proper documentation for simple custom clearance and cargo log.
Enables import tariff relief and compliance logging.
Yes, for low and moderate pressure lines. They are widely used on stainless water piping because the carbon steel backing flange does not touch the water. High-pressure lines usually use weld neck flanges.
EN 1092-1 PN-rated flanges are made to order. State PN10 or PN16 drilling in your RFQ and we will confirm it in the quotation.
It follows the pipe. Stainless 316L is common on product water, and duplex or super duplex on seawater and brine lines. The project specification decides.
Send the NPS, drilling standard (ASME class or EN PN), backing flange material, coating specification, stub end material and schedule, and quantities through the quote form.
Remax Forge & Fittings stands out as a leading flange manufacturer due to our complete in-house forging, heat treatment, and precision CNC machining capabilities based in Mumbai. We provide certified compliance, factory-direct wholesale pricing, and custom forging schedules tailored to your engineering blueprints. With over 20 years of manufacturing experience, zero-defect quality management, and short lead times, we are a trusted supply partner for critical industrial piping projects.
Fully audited quality management workflows.
Forging, heat-treat, machining in Mumbai.
PMI, Spectro, UT, Hydro labs on-site.
EN 10204 3.1 standard; 3.2 available.
Serving critical gas/oil clients globally.
Proven global logistics and documentation.
Special shapes, alloys and schedules.
Competitive pricing with no agent markup.
Engineers ready to assist spec selection.
Fast turnaround of custom and stock orders.
Ordering high-quality forged flanges from Remax is straightforward. To ensure our engineering team provides you with a precise and competitive quote, please specify the exact flange type, nominal pipe size (NPS), pressure class rating, material grade, and facing configuration. Let us know your total quantity requirements and if you require any specialized testing or custom coatings. Contact us via email or phone.
Send us your drawing, specifications, or inquiry details. Our technical engineering team will review your specs and provide a firm written quotation with price, production time and EN 10204 3.1 certification.