Flanges, butt-weld and forged fittings for Agartala's oil & gas field, power & boiler and food & agro units, made at our ISO 9001:2015 works in Mumbai, dispatched from stock in 24–48 h and delivered in about 8 days, with EN 10204 3.1 certificates.
Drilling manifolds, wellheads & high-stress extraction lines: High-Pressure SW Elbows, Duplex Blind Flanges.
Ex-stock dispatch from Mumbai in 24–48 h, then road freight to Agartala.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades held in stock.

Supplying Agartala means understanding ONGC Tripura gas fields, OTPC Palatana CCGT, rubber & agro processing. Remax Forge ships weld neck flanges, butt weld elbows and lap joint flanges from Mumbai into Bodhjungnagar industrial growth centre — A105, F52/F60 on request, SS 316L, ASME B16.5/B16.11 dimensions, EN 10204 3.1 MTC on every lot.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Agartala, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Agartala's demand for flanges and fittings comes mainly from ONGC Tripura gas fields, OTPC Palatana CCGT, rubber & agro processing. Field operators and their contractors order high-pressure socket-weld fittings, RTJ weld neck flanges and duplex or LF2 blind flanges for wellhead, gathering and manifold piping. Boiler and steam-plant demand centres on Class 300–1500 weld neck flanges, A234 WPB/WP11/WP22 fittings and IBR-certified forgings for steam headers. Food, sugar and agro-processing units order SS 304/316 flanges and butt-weld fittings for juice, syrup, oil and process lines, plus carbon steel flanges for boiler and utility piping.
Orders for Agartala leave our Mumbai stock within 24–48 hours and travel by road on NH8 via Guwahati (~3,200 km), so material is usually on site in about 8 days. Custom forgings and non-stock sizes take 7–15 working days. To quote quickly we need the size (NPS or DN), pressure class, facing (RF, FF or RTJ), material grade and the schedule of the mating pipe.
Every lot ships with an EN 10204 3.1 mill test certificate, and heat numbers are marked on each piece so they can be traced back to it. Alloy and stainless items can be PMI-checked before dispatch, and inspection by your own or a third-party agency is welcome at our works. Steam-line items for boiler work can be supplied with IBR documents. We use the same route to serve Kailashahar, Belonia, Dharmanagar and Udaipur Tripura, so mixed orders for plants in the region can be planned together.
| Service | Flanges & fittings usually specified |
|---|---|
| Wellhead & manifold piping | Class 900–2500 RTJ weld neck flanges; 6000# A105 / F316 forged fittings |
| Main steam & feedwater | A182 F11 / F22 / F91 weld neck flanges, Class 600–2500, IBR where applicable |
| Product & CIP lines | SS 304 / 316 flanges and butt-weld elbows, reducers and tees |
| Sour gas service | NACE MR0175 / ISO 15156 material, hardness-tested, with 3.1 certificates |
| Auxiliary steam & drains | A105 flanges with 3000# / 6000# socket-weld fittings |
| Boiler & steam headers | A105 weld neck flanges with A234 WPB fittings |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in A105, F52/F60 on request, SS 316L, Class 150–2500, for oil & gas field piping in Agartala.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for power & boiler lines in Agartala.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at food & agro units in Agartala.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Drilling manifolds, wellheads & high-stress extraction lines
High-Pressure SW Elbows, Duplex Blind Flanges

Superheated steam lines, IBR boiler circuits & exhaust pipes
Alloy Steel P91/F22 Flanges, IBR Fittings

Sanitary grade pipelines and food manufacturing lines
SS 304/316 Flanges, Buttweld Elbows
Route: NH8 via Guwahati (~3,200 km). Ex-stock dispatch 24–48 h from Mumbai; road freight ≈ 8 days to Agartala. Custom forgings: 7–15 working days. Packing: seaworthy crates/pallets with rust-preventive coating. Docs: invoice, packing list, 3.1 MTC, test reports, IBR documentation where applicable.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































We deliver Weld Neck Flanges, Butt Weld Elbows, Lap Joint Flanges and Spectacle Blind Flanges to Agartala in A105, F52/F60 on request, SS 316L, dimensioned to ASME B16.5, B16.47 and B16.11. Demand here comes mainly from oil & gas (upstream) and power & boilers — including units around Bodhjungnagar industrial growth centre — and every lot ships with EN 10204 3.1 certification.
Yes. For upstream and gas-gathering service around ONGC Tripura gas fields we supply weld neck flanges, butt-weld elbows and spectacle blinds compliant with NACE MR0175, in A105 and SS 316L, with 3.2 third-party inspection available. Documentation is aligned to operator vendor-approval formats.
Honestly: ex-stock items dispatch from our Mumbai warehouse within 24–48 hours and reach Agartala in roughly 8 days by road (NH8 via Guwahati (~3,200 km)). Custom forgings add 7–15 working days of production. We confirm a dated schedule with every quotation rather than promising blanket next-day delivery.
We deliver door-to-site across Agartala, including Bodhjungnagar industrial growth centre, and to nearby Kailashahar, Belonia, Dharmanagar and Udaipur Tripura. Goods leave our Mumbai stock within 24–48 hours and travel by road on NH8 via Guwahati (~3,200 km), normally arriving in about 8 days.
No — and we say so plainly. Manufacturing, stock and testing are at our ISO 9001:2015 facility in Mumbai; Agartala is served through scheduled road dispatches with full documentation. Buyers are welcome to audit the Mumbai works in person or by video inspection before ordering.
Every Agartala dispatch includes EN 10204 3.1 mill test certificates, dimensional reports and hydro/NDT test reports as ordered, IBR documentation for steam-service items, NACE MR0175 compliance and 3.2 third-party inspection on request. 100% PMI is standard on alloy and stainless lots.
We keep MOQs low for the Agartala corridor — small lots are clubbed with our scheduled dispatches on this route, so a single-item trial order is workable. Project-quantity rates apply from roughly 100 pieces or 500 kg per grade.
Direct factory pricing. No public phone calls needed.