Weld neck, RTJ-face and blind flanges for the gas-fired power stations and gas lines of southern Tripura, made at our ISO 9001:2015 works in Mumbai and sent by road with EN 10204 3.1 certificates. The lead time is stated on your written quote.
Sanitary grade pipelines and food manufacturing lines: SS 304/316 Flanges, Buttweld Elbows.
Lead time for Belonia is stated on your written quote.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades supplied with an EN 10204 3.1 MTC.

Belonia is the headquarters of South Tripura, and the heaviest flange users in this part of the state are the gas-fired power stations and the gas pipelines that feed them. Remax Forge supplies weld neck flanges for gas and oilfield lines, RTJ ring-groove flanges and isolation spectacle blinds for power plants for this work from our Mumbai plant, with an EN 10204 3.1 MTC. See also Udaipur (Tripura) and Agartala.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Belonia, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Belonia is the headquarters of South Tripura district, reached from Agartala by NH 108A to Jolaibari and then NH 8. Its station (code BENA) is on the Agartala–Sabroom line of the Northeast Frontier Railway's Lumding division, and a rail link from Belonia to Feni in Bangladesh has been discussed. The Muhuri river rises in Tripura and flows west into Bangladesh.
North of Belonia, at Palatana in Gomati district, ONGC Tripura Power Company runs a 726.6 MW combined cycle plant in two 363.3 MW blocks, fed by ONGC gas fields nearby and drawing water from the Gomati river. NEEPCO's Monarchak station, about 66 km from Agartala, is a 101 MW combined cycle plant with a 35.6 MW steam turbine.
Combined cycle plants use flanges across three systems: natural gas supply and conditioning, steam and feedwater in the heat recovery boilers, and cooling water. Gas and high-pressure steam lines take weld neck flanges, often RTJ-faced above Class 600, while spectacle blinds are fitted wherever a line has to be positively isolated for maintenance.
| Service | Flanges & fittings usually specified |
|---|---|
| Fuel gas supply and conditioning | Weld neck RF or RTJ, Class 300/600, A105 or A350 LF2 |
| HRSG steam and feedwater | Weld neck, Class 600–1500, A105 or alloy steel F11/F22 |
| Cooling water | Slip-on or weld neck, Class 150, A105 |
| Maintenance isolation | Spectacle blinds in the line class |
What we quote most often for Palatana combined cycle plant, Monarchak power station, Belonia town. Sizes, classes and grades below are those listed on our flange product pages; anything else is quoted against your specification.
| Types we quote | weld neck flanges for gas and oilfield lines, RTJ ring-groove flanges, isolation spectacle blinds for power plants, plus blinds and spectacle blinds in the same class |
|---|---|
| Dimension standards | ASME B16.5 (NPS ½"–24"), ASME B16.47 Series A/B (NPS 26"–60"), EN 1092-1 (PN6–PN400) |
| Rating range | Class 150, 300, 400, 600, 900, 1500, 2500; PN6 to PN400 |
| Grades for Belonia service | A105 and A350 LF2 for gas; F11/F22 alloy for hot steam; A105 for cooling water |
| Face options | RF, FF, RTJ, tongue & groove, male & female |
| Certificates | EN 10204 3.1 MTC with heat number on each piece; 3.2 on request |
| Dispatch | By road from Mumbai to Belonia; lead time on the written quote |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in SS 304/316, Class 150–2500, for food & agro piping in Belonia.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for water & utility lines in Belonia.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at water & utility units in Belonia.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Sanitary grade pipelines and food manufacturing lines
SS 304/316 Flanges, Buttweld Elbows

Municipal water distribution, water treatment & supply mains
Mild Steel Flanges, Concentric Reducers, Weld Bends
Route: Road freight from Mumbai to Belonia. The lead time and delivery schedule depend on the items and testing ordered and are stated on the written quote. Packing: crates or pallets with rust-preventive coating. Docs: invoice, packing list, EN 10204 3.1 MTC, test reports as ordered.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































Weld neck flanges to ASME B16.5, in A105 or A350 LF2, with RF facing at Class 300 and RTJ often specified at Class 600 and above. State the design pressure and temperature on the RFQ.
Yes. ASTM A182 F11 and F22 weld neck flanges can be quoted for high-temperature steam, with a 3.1 MTC and PMI on request.
We supply the flanges. Tell us the ring number (R, RX or BX) and the groove is machined to suit; gaskets are sourced separately.
Yes, to the contractor's specification. We are not a registered vendor of OTPC or NEEPCO, so the order goes through the contractor.
Orders go by road from our Mumbai works. The lead time depends on the types, sizes and tests ordered, so it is stated item by item on the written quote for Belonia rather than as a fixed number of days.
No. Manufacturing and testing are at our ISO 9001:2015 works in Mumbai, and Belonia orders are sent from there by road. We have no office or warehouse in Belonia.
EN 10204 3.1 mill test certificates, with dimensional reports and hydro, UT or PMI reports as ordered. A 3.2 certificate can be arranged when the specification calls for it.