Slip-on, blind and socket weld flanges for units in the Dharmanagar and Dewanpassa industrial estates of North Tripura, made at our ISO 9001:2015 works in Mumbai and sent by road with EN 10204 3.1 certificates. The lead time is stated on your written quote.
Sanitary grade pipelines and food manufacturing lines: SS 304/316 Flanges, Buttweld Elbows.
Lead time for Dharmanagar is stated on your written quote.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades supplied with an EN 10204 3.1 MTC.

Dharmanagar is North Tripura's rail town, and its two industrial estates are being upgraded under an ADB-funded programme, which brings new sheds, utilities and units that need flanges. Remax Forge supplies carbon steel slip-on flanges, blind flanges for spare nozzles and socket weld flanges for small-bore lines for them from Mumbai, with an EN 10204 3.1 MTC. See also Kailashahar and Agartala.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Dharmanagar, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Dharmanagar railway station (code DMR) is the main station in North Tripura district and the oldest in the state. Tripura's industries department lists two estates in the town: the Dharmanagar Industrial Estate, a brownfield site of about 7.95 acres, and the Dewanpassa Industrial Estate of about 46.28 acres.
The Dharmanagar estate is covered by the Tripura Industrial Infrastructure Sector Development Program, an Asian Development Bank project (number 58021-001) for which a resettlement due-diligence report was prepared in January 2025. Upgrades of this kind usually renew water supply, drainage and fire lines, and the new units that follow bring their own process piping.
Fire water mains in an industrial estate are normally carbon steel with Class 150 or PN16 flanges at hydrants, valves and pump houses, and blind flanges on the spare branches. For small process units, socket weld flanges on 2 inch and smaller lines give a sealed joint that is easy to make with a site welder.
| Service | Flanges & fittings usually specified |
|---|---|
| Estate fire water and hydrants | Slip-on or weld neck RF, Class 150 or PN16, A105 |
| Spare branches and end caps | Blind flanges, Class 150 or PN16 |
| Small-bore process lines | Socket weld, Class 150/300, A105 or SS 304 |
| Water supply and drainage pumps | Slip-on, PN10/PN16, A105 |
What we quote most often for Dharmanagar Industrial Estate, Dewanpassa Industrial Estate, Dharmanagar station. Sizes, classes and grades below are those listed on our flange product pages; anything else is quoted against your specification.
| Types we quote | carbon steel slip-on flanges, blind flanges for spare nozzles, socket weld flanges for small-bore lines, plus blinds and spectacle blinds in the same class |
|---|---|
| Dimension standards | ASME B16.5 (NPS ½"–24"), ASME B16.47 Series A/B (NPS 26"–60"), EN 1092-1 (PN6–PN400) |
| Rating range | Class 150, 300, 400, 600, 900, 1500, 2500; PN6 to PN400 |
| Grades for Dharmanagar service | A105 for fire and water mains; SS 304/316 for process lines |
| Face options | RF, FF, RTJ, tongue & groove, male & female |
| Certificates | EN 10204 3.1 MTC with heat number on each piece; 3.2 on request |
| Dispatch | By road from Mumbai to Dharmanagar; lead time on the written quote |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in SS 304/316, Class 150–2500, for food & agro piping in Dharmanagar.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for water & utility lines in Dharmanagar.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at water & utility units in Dharmanagar.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Sanitary grade pipelines and food manufacturing lines
SS 304/316 Flanges, Buttweld Elbows

Municipal water distribution, water treatment & supply mains
Mild Steel Flanges, Concentric Reducers, Weld Bends
Route: Road freight from Mumbai to Dharmanagar. The lead time and delivery schedule depend on the items and testing ordered and are stated on the written quote. Packing: crates or pallets with rust-preventive coating. Docs: invoice, packing list, EN 10204 3.1 MTC, test reports as ordered.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































Carbon steel slip-on or weld neck flanges in Class 150 or PN16 at hydrants, valves and pump connections, with blind flanges on spare branches. Check the rating against the fire pump shut-off pressure.
For lines of 2 inches and smaller where a sealed welded joint is wanted, such as steam traps, instrument and small process lines. Give the pipe schedule so the socket bore matches.
Yes. Send the piping list or P&ID line list and we quote each flange by size, class, facing and grade.
Yes, to the contract specification. We supply against the contractor's purchase order and documents, with a 3.1 MTC for each heat.
Orders go by road from our Mumbai works. The lead time depends on the types, sizes and tests ordered, so it is stated item by item on the written quote for Dharmanagar rather than as a fixed number of days.
No. Manufacturing and testing are at our ISO 9001:2015 works in Mumbai, and Dharmanagar orders are sent from there by road. We have no office or warehouse in Dharmanagar.
EN 10204 3.1 mill test certificates, with dimensional reports and hydro, UT or PMI reports as ordered. A 3.2 certificate can be arranged when the specification calls for it.