Slip-on, threaded and weld neck flanges for tea factories around Kailashahar and Tripura's gas-fired power stations, made at our ISO 9001:2015 works in Mumbai and sent by road with EN 10204 3.1 certificates. The lead time is stated on your written quote.
Sanitary grade pipelines and food manufacturing lines: SS 304/316 Flanges, Buttweld Elbows.
Lead time for Kailashahar is stated on your written quote.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades supplied with an EN 10204 3.1 MTC.

Kailashahar is the seat of Unakoti district, and the flange buyers here are tea factories around the town and contractors working on Tripura's state-run gas power stations. Remax Forge supplies carbon steel slip-on flanges, screwed flanges for building services and hydro and thermal station weld neck flanges for both from our Mumbai works, with an EN 10204 3.1 MTC. See also Dharmanagar and Agartala.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Kailashahar, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Unakoti district was created on 21 January 2012 with its headquarters at Kailashahar. The town stands on the Manu, which the municipal council calls the longest river in Tripura, and there are tea estates around it. The state has announced a new rail link between Dharmanagar and Kailashahar.
Tea factories dry and process leaf with heat from boilers, thermic fluid heaters or hot-air furnaces, so their flange needs are A105 slip-on and weld neck flanges in Class 150 or 300 on steam, thermic fluid and hot-water lines, with threaded flanges on small water and air connections. Thermic fluid lines run hot, so weld neck flanges with spiral wound gaskets are preferred there.
Across Tripura, the state utility's gas stations are being upgraded. TSECL lists Rokhia with three 21 MW units and Baramura with two 21 MW units, all open cycle, and there are proposals to convert Rokhia to combined cycle at about 120 MW and to add about 25 MW at Baramura without extra gas. Conversions of this kind add steam and feedwater piping, which needs weld neck flanges in higher classes.
| Service | Flanges & fittings usually specified |
|---|---|
| Tea factory steam and thermic fluid | Weld neck or slip-on RF, Class 150/300, A105 |
| Small water and air connections | Threaded flanges, Class 150 |
| Combined cycle conversion steam lines | Weld neck, Class 600–1500, A105 or F11/F22 |
| Cooling water and drains | Slip-on, Class 150 or PN16 |
What we quote most often for Tea estates around Kailashahar, Rokhia and Baramura gas stations. Sizes, classes and grades below are those listed on our flange product pages; anything else is quoted against your specification.
| Types we quote | carbon steel slip-on flanges, screwed flanges for building services, hydro and thermal station weld neck flanges, plus blinds and spectacle blinds in the same class |
|---|---|
| Dimension standards | ASME B16.5 (NPS ½"–24"), ASME B16.47 Series A/B (NPS 26"–60"), EN 1092-1 (PN6–PN400) |
| Rating range | Class 150, 300, 400, 600, 900, 1500, 2500; PN6 to PN400 |
| Grades for Kailashahar service | A105 for tea factory utilities; F11/F22 alloy for hot steam on power projects |
| Face options | RF, FF, RTJ, tongue & groove, male & female |
| Certificates | EN 10204 3.1 MTC with heat number on each piece; 3.2 on request |
| Dispatch | By road from Mumbai to Kailashahar; lead time on the written quote |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in SS 304/316, Class 150–2500, for food & agro piping in Kailashahar.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for water & utility lines in Kailashahar.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at water & utility units in Kailashahar.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Sanitary grade pipelines and food manufacturing lines
SS 304/316 Flanges, Buttweld Elbows

Municipal water distribution, water treatment & supply mains
Mild Steel Flanges, Concentric Reducers, Weld Bends
Route: Road freight from Mumbai to Kailashahar. The lead time and delivery schedule depend on the items and testing ordered and are stated on the written quote. Packing: crates or pallets with rust-preventive coating. Docs: invoice, packing list, EN 10204 3.1 MTC, test reports as ordered.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































Weld neck flanges in A105, Class 300, with spiral wound gaskets are the usual choice, because thermic fluid runs hot and leaks are a fire risk. Give the operating temperature on the RFQ.
Yes, in A105, Class 150, with BSP or NPT threads. State the thread type.
Yes. The heat recovery steam generator adds steam and feedwater lines at higher pressure and temperature, usually in Class 600 to 1500 weld neck flanges. We quote to the EPC contractor's line list.
Yes, to the contractor's specification. We are not a TSECL-registered vendor.
Orders go by road from our Mumbai works. The lead time depends on the types, sizes and tests ordered, so it is stated item by item on the written quote for Kailashahar rather than as a fixed number of days.
No. Manufacturing and testing are at our ISO 9001:2015 works in Mumbai, and Kailashahar orders are sent from there by road. We have no office or warehouse in Kailashahar.
EN 10204 3.1 mill test certificates, with dimensional reports and hydro, UT or PMI reports as ordered. A 3.2 certificate can be arranged when the specification calls for it.