Slip-on, threaded and blind flanges for water supply, building services and public works in Champhai district, made at our ISO 9001:2015 works in Mumbai and sent by road with EN 10204 3.1 certificates. The lead time is stated on your written quote.
Municipal water distribution, water treatment & supply mains: Mild Steel Flanges, Concentric Reducers, Weld Bends.
Lead time for Champhai is stated on your written quote.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades supplied with an EN 10204 3.1 MTC.

Champhai is a district headquarters on Mizoram's border with Myanmar, with no large process-industry estate, so the flange work here is water supply, building services and public works. Remax Forge supplies slip-on flanges for water works, threaded flanges for water supply lines and blind (BL) flanges from Mumbai with an EN 10204 3.1 MTC. See also Aizawl and Serchhip.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Champhai, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
The land customs station at Zokhawthar in Champhai district opened in August 2018, facing Rih in Myanmar's Chin State. A 2023 report said it was to be upgraded to an Integrated Check Post at an estimated Rs 15 crore, but that the plan could not move ahead because of the conflict across the border, and Mizoram's commerce minister has said normal trade will resume only when the war ends.
Without heavy industry, Champhai's flange buyers are contractors on water supply, public buildings and government works. Those jobs use slip-on flanges in Class 150 or PN10/PN16 on pump and tank connections, threaded flanges on small galvanised lines, and blind flanges to close future branches.
Because lots are small and the route is long, it pays to put every flange for a job on one RFQ: the fire-water ring, the pump room and the overhead tank together. We quote each line, and one consolidated dispatch from Mumbai keeps freight down compared with several part shipments.
| Service | Flanges & fittings usually specified |
|---|---|
| Pump and tank connections | Slip-on, Class 150 or EN 1092-1 PN10/PN16, galvanised |
| Small-bore galvanised lines | Threaded flanges, Class 150, A105 galvanised |
| Future branches and test points | Blind flanges in the line class |
| Building fire-water rings | Weld neck or slip-on, Class 150/300, A105 |
What we quote most often for Champhai town, Zokhawthar. Sizes, classes and grades below are those listed on our flange product pages; anything else is quoted against your specification.
| Types we quote | slip-on flanges for water works, threaded flanges for water supply lines, blind (BL) flanges, plus blinds and spectacle blinds in the same class |
|---|---|
| Dimension standards | ASME B16.5 (NPS ½"–24"), ASME B16.47 Series A/B (NPS 26"–60"), EN 1092-1 (PN6–PN400) |
| Rating range | Class 150, 300, 400, 600, 900, 1500, 2500; PN6 to PN400 |
| Grades for Champhai service | A105 carbon steel, hot-dip galvanised for water and fire lines; SS 304 for drinking water if specified |
| Face options | RF, FF, RTJ, tongue & groove, male & female |
| Certificates | EN 10204 3.1 MTC with heat number on each piece; 3.2 on request |
| Dispatch | By road from Mumbai to Champhai; lead time on the written quote |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in SS 304/316, Class 150–2500, for water & utility piping in Champhai.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for food & agro lines in Champhai.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at food & agro units in Champhai.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Municipal water distribution, water treatment & supply mains
Mild Steel Flanges, Concentric Reducers, Weld Bends

Sanitary grade pipelines and food manufacturing lines
SS 304/316 Flanges, Buttweld Elbows
Route: Road freight from Mumbai to Champhai. The lead time and delivery schedule depend on the items and testing ordered and are stated on the written quote. Packing: crates or pallets with rust-preventive coating. Docs: invoice, packing list, EN 10204 3.1 MTC, test reports as ordered.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































Mostly slip-on flanges in Class 150 or PN10/PN16 for pump and tank connections, threaded flanges for small galvanised pipe, and blinds for future branches. Send the BOQ and we will quote each item.
Yes. Threaded flanges with NPT or BSP threads can be supplied hot-dip galvanised to match GI pipe. State the thread type, because NPT and BSP threads do not mate.
Usually, yes. One RFQ with all items gives one quote and one dispatch, which keeps freight down on a long road route. Mark the delivery point for each item if they go to different sites.
We can quote flanges for any contractor working there, against the tender drawings or the contractor's specification. We are not registered with the agency running the post, so the order comes through the contractor.
Orders go by road from our Mumbai works. The lead time depends on the types, sizes and tests ordered, so it is stated item by item on the written quote for Champhai rather than as a fixed number of days.
No. Manufacturing and testing are at our ISO 9001:2015 works in Mumbai, and Champhai orders are sent from there by road. We have no office or warehouse in Champhai.
EN 10204 3.1 mill test certificates, with dimensional reports and hydro, UT or PMI reports as ordered. A 3.2 certificate can be arranged when the specification calls for it.