Weld neck flanges, blinds and spectacle blinds for the Tuirial hydro station and water and public works in Kolasib district, made at our ISO 9001:2015 works in Mumbai and sent by road with EN 10204 3.1 certificates. The lead time is stated on your written quote.
High-volume water diversion, penstocks & cooling loops: Large-Diameter Flanges, Concentric Reducers.
Lead time for Kolasib is stated on your written quote.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades supplied with an EN 10204 3.1 MTC.

Kolasib district has NEEPCO's Tuirial hydro station and Bairabi, Mizoram's railhead. Remax Forge supplies weld neck flanges for power stations, spectacle blinds for power stations and slip-on flanges for water works from our Mumbai works with an EN 10204 3.1 MTC. See also Aizawl and Silchar.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Kolasib, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
The 60 MW Tuirial hydroelectric project, two 30 MW units on the Tuirial river behind a 75 m earth-fill dam, is run by NEEPCO in Kolasib district. Its units were commissioned in 2017 and 2018, and officials said the plant made Mizoram a power-surplus state. Bairabi, also in Kolasib district, is the state's railhead, and the 51.38 km Bairabi–Sairang line now carries trains towards Aizawl.
Station overhauls at Tuirial need weld neck flanges and spectacle blinds on cooling-water, drainage and dewatering lines. Town and village water supply, public works around Kolasib and Vairengte, and works along the new rail line use slip-on flanges in Class 150 or PN10/PN16 and galvanised threaded flanges.
The district industries profile lists four industrial areas and no large or medium units, so most orders are small. Put all items for a site on one RFQ and we will quote them as one dispatch.
| Service | Flanges & fittings usually specified |
|---|---|
| Hydro cooling water and dewatering | Weld neck RF, Class 150/300, A105 |
| Overhaul isolation | Spectacle blinds and blind flanges in the line class |
| Town water supply | Slip-on, PN10/PN16 or Class 150, galvanised |
| Small-bore GI lines | Threaded flanges, BSP, Class 150, galvanised |
What we quote most often for Tuirial hydroelectric project, Bairabi, Vairengte. Sizes, classes and grades below are those listed on our flange product pages; anything else is quoted against your specification.
| Types we quote | weld neck flanges for power stations, spectacle blinds for power stations, slip-on flanges for water works, plus blinds and spectacle blinds in the same class |
|---|---|
| Dimension standards | ASME B16.5 (NPS ½"–24"), ASME B16.47 Series A/B (NPS 26"–60"), EN 1092-1 (PN6–PN400) |
| Rating range | Class 150, 300, 400, 600, 900, 1500, 2500; PN6 to PN400 |
| Grades for Kolasib service | A105 for station piping; galvanised carbon steel or SS 304 for water lines |
| Face options | RF, FF, RTJ, tongue & groove, male & female |
| Certificates | EN 10204 3.1 MTC with heat number on each piece; 3.2 on request |
| Dispatch | By road from Mumbai to Kolasib; lead time on the written quote |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in A105, A350 LF2 (low-temp), Class 150–2500, for hydro power piping in Kolasib.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for food & agro lines in Kolasib.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at food & agro units in Kolasib.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

High-volume water diversion, penstocks & cooling loops
Large-Diameter Flanges, Concentric Reducers

Sanitary grade pipelines and food manufacturing lines
SS 304/316 Flanges, Buttweld Elbows
Route: Road freight from Mumbai to Kolasib. The lead time and delivery schedule depend on the items and testing ordered and are stated on the written quote. Packing: crates or pallets with rust-preventive coating. Docs: invoice, packing list, EN 10204 3.1 MTC, test reports as ordered.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































We can quote weld neck flanges, blinds and spectacle blinds to ASME B16.5 in A105 or stainless, with an EN 10204 3.1 MTC, to the overhaul contractor's specification. We are not a NEEPCO-approved vendor.
Slip-on flanges in PN10/PN16 or Class 150 on pumps and tanks, galvanised threaded flanges on GI pipe, and blinds for future branches.
Our standard dispatch is by road from Mumbai. If you want a rail booking to Bairabi, say so on the RFQ and we will confirm on the quote whether it can be arranged.
Yes. We don't publish a minimum order. Put the quantity on the RFQ and the quote will show the price for it.
Orders go by road from our Mumbai works. The lead time depends on the types, sizes and tests ordered, so it is stated item by item on the written quote for Kolasib rather than as a fixed number of days.
No. Manufacturing and testing are at our ISO 9001:2015 works in Mumbai, and Kolasib orders are sent from there by road. We have no office or warehouse in Kolasib.
EN 10204 3.1 mill test certificates, with dimensional reports and hydro, UT or PMI reports as ordered. A 3.2 certificate can be arranged when the specification calls for it.