Threaded, slip-on and Class 150 flanges for water lines, public works and new projects around Serchhip and Thenzawl, made at our ISO 9001:2015 works in Mumbai and sent by road with EN 10204 3.1 certificates. The lead time is stated on your written quote.
Sanitary grade pipelines and food manufacturing lines: SS 304/316 Flanges, Buttweld Elbows.
Lead time for Serchhip is stated on your written quote.
Heat numbers marked on every piece; third-party inspection accepted.
Carbon, alloy, stainless and duplex grades supplied with an EN 10204 3.1 MTC.

Serchhip is a district headquarters on the road south from Aizawl, and the flanges ordered here are for water lines, public buildings and new district projects around Thenzawl. Remax Forge supplies threaded flanges for galvanised water pipe, slip-on flanges for water mains and ASME Class 150 flanges for these from Mumbai, with an EN 10204 3.1 MTC. See also Aizawl and Lunglei.
At Remax Forge & Fittings, every order is built to the governing standard. For high-pressure steam, oil and gas, and chemical utilities, all piping hardware is manufactured under a certified ISO 9001:2015 quality management system in our Mumbai facility. Before dispatching any order to Serchhip, every item undergoes rigorous destructive and non-destructive quality testing. This includes Positive Material Identification (PMI), hydrostatic pressure testing, ultrasonic flaw detection, and dimensional audits to ASME B16.5, B16.47, and B16.11 standards. Every dispatch is accompanied by an EN 10204 3.1 Mill Test Certificate (MTC), dimensional reports, and compliance docs.
Serchhip district was formed on 15 September 1998, carved out of Aizawl district, with its headquarters at Serchhip town. Thenzawl, in the same district, is a centre of the traditional Mizo handloom trade; a 2017 survey counted 2,003 looms there, 1,758 of them working, and the state industries department set up a handloom complex in the town.
In December 2025 the chief minister opened a 10 MW solar power plant at Thenzawl, built for about Rs 74.82 crore with NABARD funding, and in 2025 the state said it was preparing a master plan for Thenzawl as a planned town. New public buildings and town services in a growing district bring water, fire and drainage lines, which is where flanges are used.
Flange orders from a hill district are usually small and mixed. Threaded flanges work on galvanised water pipe without site welding, slip-on flanges suit welded mains, and Class 150 is enough for most building and water services. Give the pipe material and joint type for each line and we will quote the matching flange.
| Service | Flanges & fittings usually specified |
|---|---|
| Galvanised water pipe | Threaded flanges, Class 150 or PN16, A105 |
| Welded water mains and pump sets | Slip-on RF, PN10/PN16 or Class 150 |
| Building fire and drainage lines | Slip-on and blind, Class 150, A105 |
| Hospital and kitchen services | SS 304 threaded or slip-on, Class 150 |
What we quote most often for Serchhip town, Thenzawl. Sizes, classes and grades below are those listed on our flange product pages; anything else is quoted against your specification.
| Types we quote | threaded flanges for galvanised water pipe, slip-on flanges for water mains, ASME Class 150 flanges, plus blinds and spectacle blinds in the same class |
|---|---|
| Dimension standards | ASME B16.5 (NPS ½"–24"), ASME B16.47 Series A/B (NPS 26"–60"), EN 1092-1 (PN6–PN400) |
| Rating range | Class 150, 300, 400, 600, 900, 1500, 2500; PN6 to PN400 |
| Grades for Serchhip service | A105 for water mains and building services; SS 304 for hygienic lines |
| Face options | RF, FF, RTJ, tongue & groove, male & female |
| Certificates | EN 10204 3.1 MTC with heat number on each piece; 3.2 on request |
| Dispatch | By road from Mumbai to Serchhip; lead time on the written quote |

Weld neck, slip-on, blind and threaded flanges to ASME B16.5 / B16.47 in SS 304/316, Class 150–2500, for food & agro piping in Serchhip.

ASME B16.9 elbows, tees, concentric and eccentric reducers and caps, seamless or welded and matched to your pipe schedule, for water & utility lines in Serchhip.

ASME B16.11 socket-weld and threaded fittings in 3000# and 6000# (9000# on request) for small-bore drain, vent, instrument and hydraulic lines at water & utility units in Serchhip.
Flanges and forged fittings are made under an ISO 9001:2015 quality system at our Mumbai works. Alloy and stainless lots get 100% PMI, and hydrostatic, ultrasonic, radiography and magnetic particle testing are available on request. Every dispatch ships with an EN 10204 3.1 MTC.
CNC machining and in-house forging cover standard and drawing-based parts: forged fittings in 2000#, 3000#, 6000# and 9000#, and flange faces in RF, FF, RTJ, tongue & groove and male-female.
We export to 45+ countries, including the UAE, USA and Saudi Arabia. Common sizes and grades are held in stock, so ex-stock orders are dispatched within 24–48 hours.
Our team helps you pick the pressure class, material grade and face type for your service conditions. You are welcome to audit the Mumbai works in person or by video before ordering.
Precision-engineered components for mission-critical environments.

Sanitary grade pipelines and food manufacturing lines
SS 304/316 Flanges, Buttweld Elbows

Municipal water distribution, water treatment & supply mains
Mild Steel Flanges, Concentric Reducers, Weld Bends
Route: Road freight from Mumbai to Serchhip. The lead time and delivery schedule depend on the items and testing ordered and are stated on the written quote. Packing: crates or pallets with rust-preventive coating. Docs: invoice, packing list, EN 10204 3.1 MTC, test reports as ordered.
Wooden crates or pallets, with rust-preventive coating and wrapping to protect machined faces in transit and site storage.
Invoice, packing list, EN 10204 3.1 MTC, PMI reports, hydro test reports, and IBR documentation (if applicable) are dispatched with every order.


























































































Threaded flanges in A105, Class 150 or PN16, with BSP or NPT threads to match the pipe. They need no site welding.
For most building water and fire lines, yes, since Class 150 carbon steel is rated about 19.6 bar at ambient temperature. Check it against the fire pump shut-off pressure.
Yes. We make flanges to both ASME B16.5 and EN 1092-1, so state which one your valves and pumps use.
Yes. One RFQ can list different types, sizes and grades; the quote prices each line separately.
Orders go by road from our Mumbai works. The lead time depends on the types, sizes and tests ordered, so it is stated item by item on the written quote for Serchhip rather than as a fixed number of days.
No. Manufacturing and testing are at our ISO 9001:2015 works in Mumbai, and Serchhip orders are sent from there by road. We have no office or warehouse in Serchhip.
EN 10204 3.1 mill test certificates, with dimensional reports and hydro, UT or PMI reports as ordered. A 3.2 certificate can be arranged when the specification calls for it.
Direct factory pricing. No public phone calls needed.